Kconfig - OpenGrok cross reference for /linux/drivers/usb/host/Kconfig

3 # USB Host Controller Drivers
5 comment "USB Host Controller Drivers"
14 	  Enable this option to support this chip in host controller mode.
24 	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
25 	  "SuperSpeed" host controller hardware.
46 	tristate "Support for additional Renesas xHCI controller with firmware"
49 	  Say 'Y' to enable the support for the Renesas xHCI controller with
68 	  Say 'Y' to enable the support for the xHCI host controller
76 	  Say 'Y' to enable the support for the xHCI host controller
86 	  Say 'Y' to enable the support for the xHCI host controller
95 	  Say 'Y' to enable the support for the xHCI host controller
104 	  Say 'Y' to enable the support for the xHCI host controller
122 	  Say 'Y' to enable the support for the xHCI host controller
151 	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
152 	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
153 	  If your USB host controller supports USB 2.0, you will likely want to
154 	  configure this Host Controller Driver.
159 	  connect to a companion controller.  If you configure EHCI, you should
161 	  Controller Driver or UHCI (for Via motherboards) Host Controller
175 	  controller is needed.  It's safe to say "y" even if your
176 	  controller doesn't support this feature.
194 	  Controller, and some of those devices will not work correctly
209 	bool "Use Xilinx usb host EHCI controller core"
214 		Xilinx xps USB host controller core is EHCI compliant and has
220 	tristate "Support for Freescale on-chip EHCI USB controller"
226 	tristate "Support for Nuvoton NPCM on-chip EHCI USB controller"
230 	  Enables support for the on-chip EHCI controller on
239 	  Enables support for the on-chip EHCI controller on
243 	tristate  "Support for Marvell EBU on-chip EHCI USB controller"
247 	  Enables support for the on-chip EHCI controller on Marvell's
251 	  Marvell PXA/MMP USB controller" for those.
254 	tristate "Support for ST SPEAr on-chip EHCI USB controller"
258 	  Enables support for the on-chip EHCI controller on
262 	tristate "Support for ST STiHxxx on-chip EHCI USB controller"
267 	  Enable support for the on-chip EHCI controller found on
271 	tristate  "Support for Atmel on-chip EHCI USB controller"
275 	  Enables support for the on-chip EHCI controller on
293 	bool "EHCI support for PPC USB controller on OF platform bus"
297 	  Enables support for the USB controller present on the PowerPC
301 	bool "EHCI support for SuperH USB controller"
304 	  Enables support for the on-chip EHCI controller on the SuperH.
305 	  If you use the PCI EHCI controller, this option is not necessary.
312 	  controller.
315 	tristate "EHCI support for Marvell PXA/MMP USB controller"
320 	  USB SPH and OTG controller. SPH is a single port host, and it can
321 	  only be EHCI host. OTG is controller that can switch to host mode.
323 	  controller used by the EBU-type SoCs including Orion, Kirkwood,
325 	  on-chip EHCI USB controller" for those.
331 	  This driver supports USB host controller on some Cavium
355 	  controller.  It is needed for high-speed (480Mbit/sec)
365 	  The OXU210HP is an USB host/OTG/device controller. Enable this
401 	  The Open Host Controller Interface (OHCI) is a standard for accessing
402 	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
403 	  UHCI specification.  If your USB host controller follows the OHCI spec,
405 	  USB controller from Intel or VIA, this is appropriate.  If your host
406 	  controller doesn't use PCI, this is probably appropriate.  For a PCI
408 	  right "prog-if" for your USB controller(s):  EHCI, OHCI, or UHCI.
420 	  Enables support for the OHCI controller on OMAP1/2 chips.
423 	tristate "Support for ST SPEAr on-chip OHCI USB controller"
427 	  Enables support for the on-chip OHCI controller on
431 	tristate "Support for ST STiHxxx on-chip OHCI USB controller"
436 	  Enable support for the on-chip OHCI controller found on
444 	  Enables support for the on-chip OHCI controller on
448 	tristate "Support for LPC on-chip OHCI USB controller"
454 	  Enables support for the on-chip OHCI controller on
458 	tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
462 	  Enables support for the on-chip OHCI controller on
466 	tristate "Support for Atmel on-chip OHCI USB controller"
470 	  Enables support for the on-chip OHCI controller on
482 	  Enables support for the on-chip OHCI controller on
493 	  controller. This driver cannot currently be a loadable
524 	  Enables support for PCI-bus plug-in USB controller cards.
549 	  controller.
571 	  controller.  It is needed for low-speed USB 1.0 device
580 	  The Universal Host Controller Interface is a standard by Intel for
582 	  host controller). If your USB host controller conforms to this
587 	  133) and LEON/GRLIB SoCs with the GRUSBHC controller.
606 	tristate "Freescale QE USB Host Controller support"
611 	  This driver enables support for Freescale QE USB Host Controller
616 	bool "Freescale QE USB Host Controller debug support"
626 	  The SL811HS is a single-port USB controller that supports either
628 	  board has this chip, and you want to use it as a host controller.
658 	  The R8A66597 is a USB 2.0 host and peripheral controller.
661 	  to use it as a host controller.  If unsure, say N.
670 	  The Renesas USBHS is a USB 2.0 host and peripheral controller.
673 	  to use it as a host controller.  If unsure, say N.
684 	  Enable support for the EHCI and OCHI host controller on an bcma bus.
696 	  Enable support for the EHCI and OCHI host controller on an bcma bus.
706 	  supported by the host controller drivers.
709 	  (EHSET) for EHCI host controller hardware, specifically the "Single