Lines Matching refs:SCSI
2 menu "SCSI device support"
6 default y if SCSI=n || SCSI=y
7 default m if SCSI=m
21 config SCSI config
22 tristate "SCSI device support"
29 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
30 any other SCSI device under Linux, say Y and make sure that you know
31 the name of your SCSI host adapter (the card inside your computer
32 that "speaks" the SCSI protocol, also called SCSI controller),
36 the SCSI protocol. Examples of this include the parallel port
45 (the one containing the directory /) is located on a SCSI device.
61 depends on SCSI && PROC_FS
71 tristate "KUnit tests for SCSI Mid Layer's scsi_lib" if !KUNIT_ALL_TESTS
75 Run SCSI Mid Layer's KUnit tests for scsi_lib.
79 comment "SCSI support type (disk, tape, CD-ROM)"
80 depends on SCSI
83 tristate "SCSI disk support"
84 depends on SCSI
86 If you want to use SCSI hard disks, Fibre Channel disks,
88 USB storage or the SCSI or parallel port version of
89 the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
91 <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
99 (the one containing the directory /) is located on a SCSI disk.
100 In this case, do not compile the driver for your SCSI host adapter
104 tristate "SCSI tape support"
105 depends on SCSI
107 If you want to use a SCSI tape drive under Linux, say Y and read the
108 SCSI-HOWTO, available from
111 for SCSI CD-ROMs.
117 tristate "SCSI CDROM support"
118 depends on SCSI && BLK_DEV
122 by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
132 tristate "SCSI generic support"
133 depends on SCSI
135 If you want to use SCSI scanners, synthesizers or CD-writers or just
136 about anything having "SCSI" in its name other than hard disks,
139 talk to these devices using the SCSI protocol:
158 depends on SCSI
161 Saying Y here will enable generic SG (SCSI generic) v4 support
162 for any SCSI device.
169 tristate "SCSI media changer support"
170 depends on SCSI
172 This is a driver for SCSI media changers. Most common devices are
186 tristate "SCSI Enclosure Support"
187 depends on SCSI && ENCLOSURE_SERVICES
190 Enclosures are devices sitting on or in SCSI backplanes that
196 bool "Verbose SCSI error reporting (kernel size += 36K)"
197 depends on SCSI
199 The error messages regarding your SCSI hardware will be easier to
204 bool "SCSI logging facility"
205 depends on SCSI
208 of SCSI related problems.
224 If you say N here, it may be harder to track down some types of SCSI
230 bool "Asynchronous SCSI scanning"
231 depends on SCSI
233 The SCSI subsystem can probe for devices while the rest of the
245 depends on SCSI && KUNIT
248 menu "SCSI Transports"
249 depends on SCSI
252 tristate "Parallel SCSI (SPI) Transport Attributes"
253 depends on SCSI
256 each attached SCSI device to sysfs, say Y. Otherwise, say N.
260 depends on SCSI && NET
270 depends on SCSI && NET
279 depends on SCSI
289 depends on SCSI
297 bool "SCSI low-level drivers"
298 depends on SCSI!=n
301 if SCSI_LOWLEVEL && SCSI
305 depends on SCSI && INET
313 SCSI requests and responses over a TCP/IP network between the host
316 Interface Card (NIC) to provide the same functions as a SCSI or a
341 tristate "SGI WD93C93 SCSI Driver"
342 depends on SGI_HAS_WD93 && SCSI
344 If you have a Western Digital WD93 SCSI controller on
349 depends on PCI && HAS_IOPORT && SCSI
353 SCSI support required!!!
361 tristate "HP Smart Array SCSI driver"
362 depends on PCI && SCSI
367 It is a SCSI alternative to the cciss driver, which is a block
369 would prefer the devices be presented to linux as SCSI devices,
374 depends on PCI && SCSI
385 depends on PCI && SCSI
395 tristate "ACARD SCSI support"
396 depends on PCI && HAS_IOPORT && SCSI
398 This driver supports the ACARD SCSI host adapter.
405 depends on ISA && SCSI
411 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
414 It is explained in section 3.3 of the SCSI-HOWTO, available from
423 depends on ISA && SCSI && ISA_DMA_API
425 This is support for a SCSI host adapter. It is explained in section
426 3.4 of the SCSI-HOWTO, available from
437 depends on EISA && SCSI
439 This is support for a SCSI host adapter. It is explained in section
440 3.5 of the SCSI-HOWTO, available from
450 depends on SCSI && PCI
468 depends on SCSI && PCI
476 tristate "AdvanSys SCSI support"
477 depends on SCSI
481 This is a driver for all SCSI host adapters manufactured by
490 depends on PCI && SCSI
509 depends on SCSI && PCI
518 tristate "BusLogic SCSI support"
519 depends on SCSI && PCI && HAS_IOPORT
521 This is support for BusLogic MultiMaster and FlashPoint SCSI Host
522 Adapters. Consult the SCSI-HOWTO, available from
537 BusLogic SCSI driver. The FlashPoint SCCB Manager code is
557 tristate "Mylex DAC960/DAC1100 PCI RAID Controller (SCSI Interface)"
564 newer, SCSI-based interface only.
574 depends on PCI && SCSI && X86
576 This driver supports VMware's para virtualized SCSI HBA.
581 tristate "XEN SCSI frontend driver"
582 depends on SCSI && XEN
585 The XEN SCSI frontend driver allows the kernel to access SCSI Devices
588 SCSI access to a device is needed.
592 depends on SCSI && HYPERV_VMBUS
631 depends on PCI && SCSI
633 This is support for the Cisco PCI-Express SCSI HBA.
647 tristate "DMX3191D SCSI support"
648 depends on PCI && HAS_IOPORT && SCSI
651 This is support for Domex DMX3191D SCSI Host Adapters.
658 depends on SCSI
661 tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support"
662 depends on PCI && HAS_IOPORT && SCSI
665 This is support for Future Domain's PCI SCSI host adapters (TMC-3260)
670 and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
678 tristate "Future Domain 16xx ISA SCSI support"
679 depends on ISA && SCSI
683 This is support for Future Domain's 16-bit SCSI host adapters
693 depends on PCI && SCSI
701 tristate "Generic NCR5380/53c400 SCSI ISA card support"
702 depends on ISA && SCSI && HAS_IOPORT_MAP
705 This is a driver for old ISA card SCSI controllers based on a
708 various 8-bit and 16-bit ISA cards bundled with SCSI scanners.
715 depends on PCI && HAS_IOPORT && SCSI
728 tristate "IBM Virtual SCSI support"
732 This is the IBM POWER Virtual SCSI Client
738 tristate "IBM Virtual SCSI Server support"
739 depends on PPC_PSERIES && TARGET_CORE && SCSI && PCI
741 This is the IBM POWER Virtual SCSI Target Server
756 depends on PPC_PSERIES && SCSI
775 depends on PCI && HAS_IOPORT && SCSI
777 This is support for the Initio 91XXU(W) SCSI host adapter. Please
778 read the SCSI-HOWTO, available from
786 depends on PCI && HAS_IOPORT && SCSI
788 This is support for the Initio INI-A100U2W SCSI host adapter.
789 Please read the SCSI-HOWTO, available from
797 depends on SCSI && PARPORT_PC
804 Note that you can say N here if you have the SCSI version of the ZIP
806 generic "SCSI disk support", above.
815 the SCSI-HOWTO, which is available from
826 depends on SCSI && PARPORT_PC
832 Note that you can say N here if you have the SCSI version of the ZIP
834 generic "SCSI disk support", above.
843 the SCSI-HOWTO, which is available from
867 tristate "HP Lasi SCSI support for 53c700/710"
868 depends on GSC && SCSI
871 This is a driver for the SCSI controller in the Lasi chip found in
876 tristate "SNI RM SCSI support for 53c710"
877 depends on SNI_RM && SCSI
881 This is a driver for the onboard SCSI controller found in older
891 depends on PCI && SCSI
907 tristate "SYM53C8XX Version 2 SCSI support"
908 depends on PCI && SCSI
912 PCI-SCSI controllers. It also supports the subset of LSI53C10XX
914 language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
925 This option only applies to PCI-SCSI chips that are PCI DAC
949 driver will announce to the generic SCSI layer for devices
975 depends on PCI && SCSI
1003 tristate "Zalon SCSI support"
1004 depends on GSC && SCSI
1008 PA-RISC processor and the NCR 53c720 SCSI controller on C100,
1010 used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
1018 "Tagged command queuing" is a feature of SCSI-2 which improves
1019 performance: the host adapter can send several SCSI commands to a
1022 (like head positioning) based on its own request queue. Some SCSI
1037 There is no safe option other than using good SCSI devices.
1061 The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
1070 a value between 5 and 80, depending on the capability of your SCSI
1085 your SCSI devices, you should come back and decrease the value.
1088 terminations and SCSI conformant devices.
1094 This option is only provided for safety if you suspect some SCSI
1098 than 1 device on a SCSI bus. The normal answer therefore is N.
1101 tristate "Qlogic FAS SCSI support"
1102 depends on ISA && SCSI
1106 (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
1110 SCSI support"), below.
1114 SCSI-HOWTO, available from
1121 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
1122 depends on PCI && SCSI
1124 Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
1131 depends on SBUS && SCSI
1133 This driver supports SBUS SCSI controllers from PTI or QLogic. These
1135 PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
1148 depends on PCI && SCSI
1169 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
1170 depends on EISA && SCSI
1173 This driver is for NCR53c710 based SCSI host adapters.
1178 tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
1179 depends on PCI && HAS_IOPORT && SCSI
1182 This driver supports PCI SCSI host adapters based on the ASIC
1194 tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
1195 depends on PCI && SCSI
1198 This driver supports PCI SCSI host adapters based on the Am53C974A
1204 based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
1211 depends on PCI && SCSI && !64BIT && HAS_IOPORT
1214 SCSI host adapter. Please read the SCSI-HOWTO, available from
1222 depends on PCI && SCSI
1226 SCSI controllers (based on WD33C296A chip).
1229 tristate "SCSI debugging host and device simulator"
1230 depends on SCSI
1233 This pseudo driver simulates one or more hosts (SCSI initiators),
1242 tristate "MESH (Power Mac internal SCSI) support"
1243 depends on PPC32 && PPC_PMAC && SCSI
1246 SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
1247 other Power Macintoshes do). Say Y to include support for this SCSI
1258 On Power Macintoshes (and clones) where the MESH SCSI bus adaptor
1261 operation at up to 10 MB/s. On machines where the SCSI bus
1264 MESH SCSI bus is internal only; in that case you can say 10. Say 0
1273 tristate "53C94 (Power Mac external SCSI) support"
1274 depends on PPC32 && PPC_PMAC && SCSI
1276 On Power Macintoshes (and clones) with two SCSI buses, the external
1277 SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
1278 machines which only have one SCSI bus, such as the 7200, also use
1287 bool "MIPS JAZZ FAS216 SCSI support"
1288 depends on MACH_JAZZ && SCSI=y
1291 This is the driver for the onboard SCSI host adapter of MIPS Magnum
1297 depends on AMIGA && SCSI
1299 If you have an Amiga 3000 and have SCSI devices connected to the
1300 built-in SCSI controller, say Y. Otherwise, say N.
1307 depends on ZORRO && SCSI
1309 If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
1317 depends on ZORRO && SCSI
1319 If you have a Great Valley Products Series II SCSI controller,
1320 answer Y. Also say Y if you have a later model of GVP SCSI
1329 tristate "A4000T NCR53c710 SCSI support"
1330 depends on AMIGA && SCSI
1333 If you have an Amiga 4000T and have SCSI devices connected to the
1334 built-in SCSI controller, say Y. Otherwise, say N.
1340 tristate "Zorro NCR53c710 SCSI support"
1341 depends on ZORRO && SCSI
1344 Support for various NCR53c710-based SCSI controllers on Zorro
1347 - the Amiga 4091 Zorro III SCSI-2 controller,
1348 - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
1351 - the SCSI controller on the Phase5 Blizzard PowerUP 603e+
1353 - the SCSI controller on the GVP Turbo 040/060 accelerator.
1356 tristate "Zorro ESP SCSI support"
1357 depends on ZORRO && SCSI
1361 Support for various NCR53C9x (ESP) based SCSI controllers on Zorro
1364 - the Phase5 Blizzard 1230 II and IV SCSI controllers,
1365 - the Phase5 Blizzard 2060 SCSI controller,
1366 - the Phase5 Blizzard Cyberstorm and Cyberstorm II SCSI
1368 - the Fastlane Zorro III SCSI controller.
1371 tristate "Atari native SCSI support"
1372 depends on ATARI && SCSI
1375 If you have an Atari with built-in NCR5380 SCSI controller (TT,
1377 a compatible SCSI controller (e.g. for Medusa).
1380 be called atari_scsi. If you also enable NVRAM support, the SCSI
1389 tristate "Macintosh NCR5380 SCSI"
1390 depends on MAC && SCSI
1393 This is the NCR 5380 SCSI controller included on most of the 68030
1395 SCSI-HOWTO, available from
1399 tristate "Macintosh NCR53c9[46] SCSI"
1400 depends on MAC && SCSI
1404 This is the NCR 53c9x SCSI controller found on most of the 68040
1411 bool "WD33C93 SCSI driver for MVME147"
1412 depends on MVME147 && SCSI=y
1415 Support for the on-board SCSI controller on the Motorola MVME147
1419 tristate "NCR53C710 SCSI driver for MVME16x"
1420 depends on MVME16x && SCSI
1424 SCSI controller chip. Almost everyone using one of these boards
1428 tristate "NCR53C710 SCSI driver for BVME6000"
1429 depends on BVME6000 && SCSI
1433 SCSI controller chip. Almost everyone using one of these boards
1437 tristate "Sun3 NCR5380 SCSI"
1438 depends on SUN3 && SCSI
1442 SCSI controller found in the Sun 3/50 and 3/60, as well as for
1448 bool "Sun3x ESP SCSI"
1449 depends on SUN3X && SCSI=y
1452 The ESP was an on-board SCSI controller used on Sun 3/80
1457 depends on SBUS && SCSI
1460 This is the driver for the Sun ESP SCSI host adapter. The ESP
1462 supports the Emulex family of ESP SCSI chips (esp100, esp100A,
1463 esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip.
1470 depends on S390 && QDIO && SCSI
1473 If you want to access SCSI devices attached to your IBM mainframe by
1489 depends on PCI && SCSI && NET
1496 depends on PCI && SCSI
1504 depends on PCI && SCSI