Kconfig - OpenGrok cross reference for /linux/drivers/net/ethernet/stmicro/stmmac/Kconfig

15 	  This is the driver for the Ethernet IPs built around a
26 	  This adds support for STMMAC Selftests using ethtool. Enable this
36 	  This selects the platform specific bus support for the stmmac driver.
37 	  This is the driver used on several SoCs:
69 	  This selects the Anarion SoC glue layer support for the stmmac driver.
75 	  This driver supports the Eswin EIC7700 Ethernet controller,
88 	  This selects Ingenic SoCs glue layer support for the stmmac
89 	  device driver. This driver is used on for the Ingenic SoCs
100 	  This selects the IPQ806x SoC glue layer support for the stmmac
101 	  device driver. This driver does not use any of the hardware
122 	  This selects the MT2712 SoC support for the stmmac driver.
131 	  This selects the Amlogic Meson SoC glue layer support for
132 	  the stmmac device driver. This driver is used for Meson6,
142 	  This selects the Qualcomm ETHQOS glue layer support for the
154 	  This selects Renesas SoC glue layer support for the stmmac device
155 	  driver. This driver is used for the RZ/V2H(P) family, RZ/T2H and
166 	  This selects the Rockchip RK3288 SoC glue layer support for
177 	  This selects the Renesas RZ/N1 SoC glue layer support for
178 	  the stmmac device driver. This support can make use of a custom MII
188 	  This selects NXP SoC glue layer support for the stmmac
189 	  device driver. This driver is used for the S32CC series
204 	  This selects the Altera SOCFPGA SoC glue layer support
205 	  for the stmmac device driver. This driver is used for
215 	  This selects the Sophgo SoC specific glue layer support
216 	  for the stmmac device driver. This driver is used for the
227 	  This selects the StarFive platform specific glue layer support
228 	  for the stmmac device driver. This driver is used for the
239 	  This selects STi SoC glue layer support for the stmmac
240 	  device driver. This driver is used on for the STi series
251 	  This selects STM32 SoC glue layer support for the stmmac
252 	  device driver. This driver is used on for the STM32 series
262 	  This selects Allwinner SoC glue layer support for the
263 	  stmmac device driver. This driver is used for A20/A31
274 	  This selects Allwinner SoC glue layer support for the
275 	  stmmac device driver. This driver is used for H3/A83T/A64
286 	  This selects Allwinner SoC glue layer support for the
287 	  stmmac device driver. This driver is used for A523/T527
296 	  This selects the T-HEAD platform specific glue layer support for
297 	  the stmmac device driver. This driver is used for T-HEAD TH1520
308 	  This selects NXP SoC glue layer support for the stmmac
309 	  device driver. This driver is used for i.MX8 series like
319 	  This selects the Intel platform specific glue layer support for
320 	  the stmmac device driver. This driver is used for the Intel Keem Bay
330 	  This selects Loongson1 SoC glue layer support for the stmmac
331 	  device driver. This driver is used for Loongson1-based boards
338 	  This selects the Multi-GigaBit Ethernet (MGBE) Controller that is
339 	  found on the NVIDIA Tegra SoC devices. This driver provides the glue
355 	  This option enables the PCI bus helpers for the stmmac driver.
364 	  This selects the Intel platform specific bus support for the
365 	  stmmac driver. This driver is used for Intel Quark/EHL/TGL.
374 	  This selects the LOONGSON PCI bus support for the stmmac driver,
383 	  This enables glue driver for Motorcomm DWMAC-based PCI Ethernet
392 	  This selects the platform specific bus support for the stmmac driver.
393 	  This driver was tested on XLINX XC2V3000 FF1152AMT0221