264 	e_err("Unsupported Speed/Duplex configuration\n");  in e1000_set_spd_dplx()
284 		e_err("Cannot change link characteristics when SoL/IDER is active.\n");  in e1000_set_link_ksettings()
298 			e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");  in e1000_set_link_ksettings()
775 			e_err("pattern test failed (reg 0x%05X): got 0x%08X expected 0x%08X\n",  in reg_pattern_test()
793 		e_err("set/check test failed (reg 0x%05X): got 0x%08X expected 0x%08X\n",  in reg_set_and_check()
847 		e_err("failed STATUS register test got: 0x%08X expected: 0x%08X\n",  in e1000_reg_test()
1376 			e_err("Cannot setup 1Gbps loopback.\n");  in e1000_integrated_phy_loopback()
1714 		e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");  in e1000_loopback_test()
1902 			e_err("Interface does not support directed (unicast) frame wake-up packets\n");  in e1000_get_wol()
2226 		e_err("Setting EEE tx-lpi is not supported\n");  in e1000e_set_eee()
2231 		e_err("Setting EEE Tx LPI timer is not supported\n");  in e1000e_set_eee()
2241 		e_err("EEE advertisement supports only 100TX and/or 1000T full-duplex\n");  in e1000e_set_eee()
2317 			e_err("S0ix is not supported on this device\n");  in e1000e_set_priv_flags()
2326 			e_err("Disabling K1 is not supported on this device\n");  in e1000e_set_priv_flags()