dec/tulip/dmfe.c

149 #define DMFE_DBUG(dbug_now, msg, value)			\
359 	DMFE_DBUG(0, "dmfe_init_one()", 0);
518 	DMFE_DBUG(0, "dmfe_remove_one()", 0);
534 	DMFE_DBUG(0, "dmfe_remove_one() exit", 0);
549 	DMFE_DBUG(0, "dmfe_open", 0);
605 	DMFE_DBUG(0, "dmfe_init_dm910x()", 0);
674 	DMFE_DBUG(0, "dmfe_start_xmit", 0);
742 	DMFE_DBUG(0, "dmfe_stop", 0);
786 	DMFE_DBUG(0, "dmfe_interrupt()", 0);
804 		DMFE_DBUG(1, "System bus error happen. CR5=", db->cr5_data);
967 			DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
1020 				DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
1041 	DMFE_DBUG(0, "dmfe_set_filter_mode()", 0);
1045 		DMFE_DBUG(0, "Enable PROM Mode", 0);
1053 		DMFE_DBUG(0, "Pass all multicast address", mc_count);
1060 	DMFE_DBUG(0, "Set multicast address", mc_count);
1127 	DMFE_DBUG(0, "dmfe_timer()", 0);
1174 		DMFE_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);
1217 		DMFE_DBUG (0, "PHY and chip report different link status", 0);
1223 		DMFE_DBUG(0, "Link Failed", tmp_cr12);
1241 		DMFE_DBUG(0, "Link link OK", tmp_cr12);
1279 	DMFE_DBUG(0, "dmfe_dynamic_reset()", 0);
1314 	DMFE_DBUG(0, "dmfe_free_rxbuffer()", 0);
1342 		DMFE_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
1362 	DMFE_DBUG(0, "dmfe_descriptor_init()", 0);
1483 	DMFE_DBUG(0, "send_filter_frame()", 0);
1652 		DMFE_DBUG(0, "Link Failed :", phy_mode);
1906 	DMFE_DBUG(0, "dmfe_parse_srom() ", 0);
2168 	DMFE_DBUG(0, "init_module() ", debug);
2213 	DMFE_DBUG(0, "dmfe_cleanup_module() ", debug);