Lines Matching defs:rsense

39 	 * The rsense value used in MBR formula in LTC4286 datasheet should be ohm unit.
40 	 * However, the rsense value that user input is micro ohm.
41 	 * Thus, the MBR setting which involves rsense should be shifted by 6 digits.
47 	 * The rsense value used in MBR formula in LTC4286 datasheet should be ohm unit.
48 	 * However, the rsense value that user input is micro ohm.
49 	 * Thus, the MBR setting which involves rsense should be shifted by 6 digits.
73 	u32 rsense;
107 				 "shunt-resistor-micro-ohms", &rsense))
108 		rsense = 300; /* 0.3 mOhm if not set via DT */
110 	if (rsense == 0)
114 	if (rsense > (INT_MAX / 1024))
135 		info->m[PSC_POWER] = 4 * rsense;
140 		info->m[PSC_POWER] = rsense;
151 	info->m[PSC_CURRENT_OUT] = 1024 * rsense;