drivers/firmware/ti_sci.h

225  * @resets: Programmed state of the reset lines.
226  * @programmed_state:	The state as programmed by set_device.
339  * @programmed_state: Any programmed state of the clock. This is one of
461  *		allowable programmed frequency and does not account for clock
466  *		allowable programmed frequency and does not account for clock
508  *		allowable programmed frequency and does not account for clock
510  * @target_freq_hz: The target clock frequency. The clock will be programmed
513  *		allowable programmed frequency and does not account for clock
817  * @addr_lo: 32 LSBs of ring base address to be programmed into the ring's
819  * @addr_hi: 16 MSBs of ring base address to be programmed into the ring's
856  * TCHAN_THRD_ID register programmed with the destination thread if the pairing
864  * RCHAN_THRD_ID register programmed with the source thread if the pairing
1040  * be programmed into the tx_pause_on_err field of the channel's TCHAN_TCFG
1044  * configuration to be programmed into the tx_filt_einfo field of the
1048  * configuration to be programmed into the tx_filt_pswords field of the
1052  * interpretation configuration to be programmed into the tx_atype field of
1056  * passing mechanism configuration to be programmed into the tx_chan_type
1060  * configuration to be programmed into the tx_supr_tdpkt field of the channel's
1064  * fetch configuration to be programmed into the tx_fetch_size field of the
1069  * configuration to be programmed into the count field of the TCHAN_TCREDIT
1073  * programmed into the txcq_qnum field of the TCHAN_TCQ register. The specified
1077  * @tx_priority: UDMAP transmit channel transmit priority value to be programmed
1080  * @tx_qos: UDMAP transmit channel transmit qos value to be programmed into the
1083  * @tx_orderid: UDMAP transmit channel bus order id value to be programmed into
1086  * @fdepth: UDMAP transmit channel FIFO depth configuration to be programmed
1092  * configuration to be programmed into the priority field of the channel's
1096  * programmed into the tx_burst_size field of the TCHAN_TCFG register.
1099  * programmed into the tdtype field of the TCHAN_TCFG register:
1167  * fetch configuration to be programmed into the rx_fetch_size field of the
1171  * programmed into the rxcq_qnum field of the RCHAN_RCQ register.
1175  * @rx_priority: UDMAP receive channel receive priority value to be programmed
1178  * @rx_qos: UDMAP receive channel receive qos value to be programmed into the
1181  * @rx_orderid: UDMAP receive channel bus order id value to be programmed into
1185  * configuration to be programmed into the priority field of the channel's
1210  * programmed into the rx_pause_on_err field of the channel's RCHAN_RCFG
1214  * interpretation configuration to be programmed into the rx_atype field of the
1218  * mechanism configuration to be programmed into the rx_chan_type field of the
1222  * to be programmed into the rx_ignore_short field of the RCHAN_RCFG register.
1225  * be programmed into the rx_ignore_long field of the RCHAN_RCFG register.
1228  * programmed into the rx_burst_size field of the RCHAN_RCFG register.
1295  * programmed into the rx_einfo_present field of the flow's RFLOW_RFA register.
1298  * UDMAP receive flow PS words present configuration to be programmed into the
1302  * UDMAP receive flow error handling configuration to be programmed into the
1306  * UDMAP receive flow descriptor type configuration to be programmed into the
1310  * UDMAP receive flow start of packet offset configuration to be programmed
1316  * UDMAP receive flow destination queue configuration to be programmed into the
1324  * programmed into the rx_src_tag_hi field of the flow's RFLOW_RFB register.
1329  * programmed into the rx_src_tag_lo field of the flow's RFLOW_RFB register.
1334  * programmed into the rx_dest_tag_hi field of the flow's RFLOW_RFB register.
1339  * programmed into the rx_dest_tag_lo field of the flow's RFLOW_RFB register.
1344  * programmed into the rx_src_tag_hi_sel field of the RFLOW_RFC register.  See
1349  * programmed into the rx_src_tag_lo_sel field of the RFLOW_RFC register.  See
1354  * programmed into the rx_dest_tag_hi_sel field of the RFLOW_RFC register.  See
1359  * programmed into the rx_dest_tag_lo_sel field of the RFLOW_RFC register.  See
1363  * UDMAP receive flow free descriptor queue 0 configuration to be programmed
1371  * UDMAP receive flow free descriptor queue 1 configuration to be programmed
1379  * UDMAP receive flow free descriptor queue 2 configuration to be programmed
1387  * UDMAP receive flow free descriptor queue 3 configuration to be programmed
1395  * UDMAP receive flow PS words location configuration to be programmed into the