dts/qcom/sdm660-xiaomi-lavender.dts

1 // SPDX-License-Identifier: GPL-2.0-only
7 /dts-v1/;
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/input/gpio-keys.h>
18 	chassis-type = "handset";
25 		#address-cells = <2>;
26 		#size-cells = <2>;
29 		stdout-path = "serial0:115200n8";
32 			compatible = "simple-framebuffer";
41 	vph_pwr: vph-pwr-regulator {
42 		compatible = "regulator-fixed";
43 		regulator-name = "vph_pwr";
44 		regulator-min-microvolt = <3700000>;
45 		regulator-max-microvolt = <3700000>;
47 		regulator-always-on;
48 		regulator-boot-on;
51 	gpio-keys {
52 		compatible = "gpio-keys";
54 		key-volup {
58 			debounce-interval = <15>;
62 	reserved-memory {
63 		#address-cells = <2>;
64 		#size-cells = <2>;
70 			console-size = <0x20000>;
71 			record-size = <0x20000>;
72 			ftrace-size = <0x0>;
73 			pmsg-size = <0x20000>;
78 			no-map;
83 	 * Until we hook up type-c detection, we
86 	extcon_usb: extcon-usb {
87 		compatible = "linux,extcon-usb-gpio";
88 		id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
109 	vdd-supply = <&vreg_l1b_0p925>;
110 	vdda-pll-supply = <&vreg_l10a_1p8>;
111 	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
115 	regulators-0 {
116 		compatible = "qcom,rpm-pm660l-regulators";
118 		vdd_s1-supply = <&vph_pwr>;
119 		vdd_s2-supply = <&vph_pwr>;
120 		vdd_s3_s4-supply = <&vph_pwr>;
121 		vdd_s5-supply = <&vph_pwr>;
122 		vdd_s6-supply = <&vph_pwr>;
124 		vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
125 		vdd_l2-supply = <&vreg_bob>;
126 		vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
127 		vdd_l4_l6-supply = <&vreg_bob>;
128 		vdd_bob-supply = <&vph_pwr>;
131 			regulator-min-microvolt = <1125000>;
132 			regulator-max-microvolt = <1125000>;
133 			regulator-enable-ramp-delay = <200>;
137 			regulator-min-microvolt = <1050000>;
138 			regulator-max-microvolt = <1050000>;
139 			regulator-enable-ramp-delay = <200>;
144 			regulator-min-microvolt = <800000>;
145 			regulator-max-microvolt = <925000>;
146 			regulator-enable-ramp-delay = <250>;
147 			regulator-allow-set-load;
152 			regulator-min-microvolt = <1648000>;
153 			regulator-max-microvolt = <2696000>;
154 			regulator-enable-ramp-delay = <250>;
155 			regulator-allow-set-load;
159 			regulator-min-microvolt = <1700000>;
160 			regulator-max-microvolt = <3300000>;
161 			regulator-enable-ramp-delay = <250>;
162 			regulator-allow-set-load;
166 			regulator-min-microvolt = <2944000>;
167 			regulator-max-microvolt = <2952000>;
168 			regulator-enable-ramp-delay = <250>;
170 			regulator-min-microamp = <200>;
171 			regulator-max-microamp = <600000>;
172 			regulator-system-load = <570000>;
173 			regulator-allow-set-load;
177 		 * Downstream specifies a range of 1721-3600mV,
180 		 * Tighten the range to 1.8-3.328 (closest to 3.3) to
184 			regulator-min-microvolt = <1800000>;
185 			regulator-max-microvolt = <3328000>;
186 			regulator-enable-ramp-delay = <250>;
187 			regulator-allow-set-load;
188 			regulator-system-load = <800000>;
192 			regulator-min-microvolt = <2700000>;
193 			regulator-max-microvolt = <3125000>;
194 			regulator-enable-ramp-delay = <250>;
198 			regulator-min-microvolt = <3200000>;
199 			regulator-max-microvolt = <3400000>;
200 			regulator-enable-ramp-delay = <250>;
204 			regulator-min-microvolt = <3300000>;
205 			regulator-max-microvolt = <3600000>;
206 			regulator-enable-ramp-delay = <500>;
210 	regulators-1 {
211 		compatible = "qcom,rpm-pm660-regulators";
213 		vdd_s1-supply = <&vph_pwr>;
214 		vdd_s2-supply = <&vph_pwr>;
215 		vdd_s3-supply = <&vph_pwr>;
216 		vdd_s4-supply = <&vph_pwr>;
217 		vdd_s5-supply = <&vph_pwr>;
218 		vdd_s6-supply = <&vph_pwr>;
220 		vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
221 		vdd_l2_l3-supply = <&vreg_s2b_1p05>;
222 		vdd_l5-supply = <&vreg_s2b_1p05>;
223 		vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
224 		vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
233 			regulator-min-microvolt = <1805000>;
234 			regulator-max-microvolt = <2040000>;
235 			regulator-enable-ramp-delay = <200>;
236 			regulator-always-on;
240 			regulator-min-microvolt = <1224000>;
241 			regulator-max-microvolt = <1350000>;
242 			regulator-enable-ramp-delay = <200>;
246 			regulator-min-microvolt = <504000>;
247 			regulator-max-microvolt = <992000>;
248 			regulator-enable-ramp-delay = <150>;
253 			regulator-min-microvolt = <1150000>;
254 			regulator-max-microvolt = <1250000>;
255 			regulator-enable-ramp-delay = <250>;
256 			regulator-allow-set-load;
260 			regulator-min-microvolt = <950000>;
261 			regulator-max-microvolt = <1010000>;
262 			regulator-enable-ramp-delay = <250>;
266 			regulator-min-microvolt = <950000>;
267 			regulator-max-microvolt = <1010000>;
268 			regulator-enable-ramp-delay = <250>;
272 			regulator-min-microvolt = <525000>;
273 			regulator-max-microvolt = <950000>;
274 			regulator-enable-ramp-delay = <250>;
278 			regulator-min-microvolt = <1200000>;
279 			regulator-max-microvolt = <1370000>;
280 			regulator-allow-set-load;
281 			regulator-enable-ramp-delay = <250>;
285 			regulator-min-microvolt = <1200000>;
286 			regulator-max-microvolt = <1200000>;
287 			regulator-enable-ramp-delay = <250>;
291 			regulator-min-microvolt = <1750000>;
292 			regulator-max-microvolt = <1800000>;
293 			regulator-enable-ramp-delay = <250>;
294 			regulator-system-load = <325000>;
295 			regulator-allow-set-load;
299 			regulator-min-microvolt = <1750000>;
300 			regulator-max-microvolt = <1900000>;
301 			regulator-enable-ramp-delay = <250>;
302 			regulator-allow-set-load;
306 			regulator-min-microvolt = <1780000>;
307 			regulator-max-microvolt = <1950000>;
308 			regulator-enable-ramp-delay = <250>;
309 			regulator-allow-set-load;
313 			regulator-min-microvolt = <1780000>;
314 			regulator-max-microvolt = <1950000>;
315 			regulator-enable-ramp-delay = <250>;
319 			regulator-min-microvolt = <1780000>;
320 			regulator-max-microvolt = <1950000>;
321 			regulator-enable-ramp-delay = <250>;
326 			regulator-min-microvolt = <1780000>;
327 			regulator-max-microvolt = <1950000>;
328 			regulator-enable-ramp-delay = <250>;
329 			regulator-boot-on;
330 			regulator-always-on;
334 			regulator-min-microvolt = <1710000>;
335 			regulator-max-microvolt = <1900000>;
336 			regulator-enable-ramp-delay = <250>;
340 			regulator-min-microvolt = <1650000>;
341 			regulator-max-microvolt = <2950000>;
342 			regulator-enable-ramp-delay = <250>;
346 			regulator-min-microvolt = <2800000>;
347 			regulator-max-microvolt = <2800000>;
348 			regulator-enable-ramp-delay = <250>;
349 			regulator-always-on;
353 			regulator-min-microvolt = <1648000>;
354 			regulator-max-microvolt = <2952000>;
355 			regulator-enable-ramp-delay = <250>;
359 			regulator-min-microvolt = <3312000>;
360 			regulator-max-microvolt = <3400000>;
361 			regulator-enable-ramp-delay = <250>;
362 			regulator-allow-set-load;
370 	qcom,switching-freq = <800>;
371 	qcom,current-limit-microamp = <20000>;
372 	qcom,num-strings = <2>;
376 	sd-cd-pins {
379 		bias-pull-up;
380 		drive-strength = <2>;
385 	sd-cd-pins {
388 		bias-disable;
389 		drive-strength = <2>;
395 	supports-cqe;
397 	mmc-hs200-1_8v;
398 	mmc-hs400-1_8v;
399 	mmc-hs400-enhanced-strobe;
401 	vmmc-supply = <&vreg_l4b_2p95>;
402 	vqmmc-supply = <&vreg_l8a_1p8>;
408 	cd-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
410 	vmmc-supply = <&vreg_l5b_2p95>;
411 	vqmmc-supply = <&vreg_l2b_2p95>;
415 	gpio-reserved-ranges = <8 4>;
419 	qcom,select-utmi-as-pipe-clk;
425 	maximum-speed = "high-speed";
427 	phy-names = "usb2-phy";