Lines Matching full:default
14 parameters to their default state (RFC1122 for hosts, RFC1812
22 Default: 0 (disabled)
25 Default value of TTL field (Time To Live) for outgoing (but not
27 Default: 64 (as recommended by RFC1700)
54 Default: FALSE
57 default 552 - minimum Path MTU. Unless this is changed manually,
61 By default we don't trust protocol path MTUs while forwarding
74 Default: 0 (disabled)
87 Default: 0 (disabled)
100 Default: 0 (disabled)
106 Default: 0 (Layer 3)
141 Default: 0x0007 (source IP, destination IP and IP protocol)
155 Default: 0 (random)
161 Default: 512kB Minimum: 64kB Maximum: 64MB
168 Default: 1 (Update priority.)
185 neigh/default/gc_thresh1 - INTEGER
189 Default: 128
191 neigh/default/gc_thresh2 - INTEGER
196 Default: 512
198 neigh/default/gc_thresh3 - INTEGER
203 Default: 1024
205 neigh/default/unres_qlen_bytes - INTEGER
212 Default: SK_WMEM_DEFAULT, (same as net.core.wmem_default).
218 neigh/default/unres_qlen - INTEGER
224 Prior to linux 3.3, the default value is 3 which may cause
225 unexpected packet loss. The current default value is calculated
226 according to default value of unres_qlen_bytes and true size of
229 Default: 101
231 neigh/default/interval_probe_time_ms - INTEGER
235 Default: 5000
257 Default: 0 (Do not emit notifications.)
300 Default: 64
307 Default: 0
340 reset them. Default state is FALSE. It means that if overflow
354 Default: 1
361 Default is "reno" and the default setting (tcp_congestion_control).
369 Default: 31
385 Default: 1 (enabled)
401 Default : 48
410 Default : 48 (at least 8 bytes of payload per segment)
416 Default is set as part of kernel configuration.
430 Default: 1 (enabled)
442 Default: 3
469 Default: 2
490 Default: 2
496 Default: 3 (AccECN will be send at least 3 times per RTT)
511 Default: 1 (enabled)
526 Default: 60 seconds
535 By default it's enabled with a non-zero value. 0 disables F-RTO.
551 Default: 0 (disabled)
573 Default: 500 (milliseconds).
577 Default: 2hours.
581 connection is broken. Default value: 9.
586 after probes started. Default value: 75sec i.e. connection
602 Default: 0 (disabled)
614 if network conditions require more than default value,
639 if network conditions require more than default value.
664 Default: 300
676 Default: 1 (enabled)
686 Default : 1000 (1 ms)
693 - 1 - Disabled by default, enabled when an ICMP black hole detected
698 Discovery reprobe. The default is reprobing every 10 minutes as
703 will stop in respect to the width of search range in bytes. Default
707 By default, TCP saves various connection metrics in the route cache
719 Default: 0 (disabled)
730 Default: 1 (enabled)
737 The default value is 8.
759 Default: 0x1
774 Default: 0 (disabled)
781 Default: 3
788 Default: 300
800 Default: 1 (enabled)
809 default.
818 The default value of 15 yields a hypothetical timeout of 924.6
838 Default: 0 (disabled)
840 tcp_rmem - vector of 3 INTEGERs: min, default, max
845 Default: 4K
847 default: initial size of receive buffer used by TCP sockets.
849 Default: 131072 bytes.
857 Default: between 131072 and 32MB, depending on RAM size.
867 Default: 1 (enabled)
875 Default : 33 %
881 The default is 1ms, based on TSO autosizing period.
883 Default : 1,000,000 ns (1 ms)
892 Default : 10,000 ns (10 us)
898 Default : 44
910 Default: 1 (enabled)
923 Default: 1 (enabled)
935 Default: 0 (disabled)
939 be retransmitted. Should not be higher than 255. Default value
948 Default: 1
997 Default: 0 (disabled)
1003 The client support is enabled by flag 0x1 (on by default). The client
1007 The server support is enabled by flag 0x2 (off by default). Then
1023 default without explicit TCP_FASTOPEN socket option.
1026 Default: 0x1
1039 By default, it is set to 0 (feature is disabled).
1063 will be retransmitted. Should not be higher than 127. Default value
1077 Default: 1
1088 Default: 2
1111 Default: 9 (2^9 = 512 usec)
1120 Default: 200
1128 Default: 120
1138 Default: 4
1146 Default: 3
1159 Default: 2
1173 Default: 1000 (milliseconds)
1183 Default: 1 (enabled)
1200 Default: 0 (disabled)
1202 tcp_wmem - vector of 3 INTEGERs: min, default, max
1206 Default: 4K
1208 default: initial size of send buffer used by TCP sockets. This
1213 Default: 16K
1221 Default: between 64K and 4MB, depending on RAM size.
1234 Default: UINT_MAX (0xFFFFFFFF)
1247 Default: 0 (disabled)
1265 Default: 0 (disabled)
1277 Default: 4194304 (4 MB)
1285 Default: INT_MAX (unlimited)
1309 Note also that the default value of tcp_max_tw_buckets and
1314 Default: 0
1343 Default: 0 (disabled)
1353 Default: 3
1364 Default: 12
1376 Default: 60
1394 Default: 128
1402 This threshold is 1 by default, but some applications may need a higher
1407 Default: 1
1420 Default: 200000
1431 Default: 120,000
1448 Default: 0 (disabled)
1459 Default is calculated at boot time from amount of available memory.
1466 Default: 4K
1495 Default: 0
1513 Default: 1 (enabled)
1530 Default: 1 (enabled)
1540 Default: 10
1553 Default: 0 (disabled)
1568 Default: 0 (disabled)
1580 The default values are 32768 and 60999 respectively.
1613 Default: Empty
1622 Default: 1024
1633 Default: 0 (disabled)
1636 By default, bind() does not select the ports automatically even if
1648 Default: 0 (disabled)
1656 Default: 0
1671 Default: 1 (enabled)
1675 The default is "1 0", meaning, that nobody (not even root) may
1688 Default: 1 (enabled)
1699 Default: 1 (enabled)
1710 Default: 0 (disabled)
1721 Default: 0 (disabled)
1732 Default: 1 (enabled)
1742 Default: 1000
1750 Default: 1000
1757 Default: 50
1764 Default mask: 0000001100000011000 (6168)
1784 .. [1] These are rate limited by default (see default mask above)
1797 Default: 1 (enabled)
1819 Default: 0 (disabled)
1836 Default: 0x00 (no extensions)
1840 Default: 20
1864 Default: 10
1869 Default: 2 (as specified by RFC2236 8.1)
1874 - 0 - (default) No enforcement of a IGMP version, IGMPv1/v2 fallback
1881 - 3 - Enforce to use IGMP version 3. The same react with default 0.
1888 this value as default 0 is recommended.
1917 default:
1936 The default value 0 means that the device is the only interface
1987 default TRUE
2000 default TRUE
2009 Default: TRUE
2018 default FALSE
2027 default
2036 default FALSE
2042 default FALSE
2049 By default failed packets are discarded.
2062 Default value is 0. Note that some distributions enable it
2082 Default value is 0.
2092 - 0 - (default) The kernel can respond to arp requests with addresses
2108 - 0 - (default) Use any local address, configured on any interface
2139 - 0 - (default): reply for any local target IP address, configured
2158 0 (default): do nothing
2184 remain as the default (1).
2191 Default: 1 (enabled)
2219 Default: 0 (disabled)
2229 Default: 0 (disabled)
2235 Default: 10000 (10 seconds)
2241 Default: 1000 (1 seconds)
2251 Default: 0 (disabled)
2263 Default: 0 (disabled)
2270 1122, but is disabled by default for compatibility reasons.
2277 Default: 0 (disabled)
2289 Default: 0 (disabled)
2295 Default value is 0.
2307 Default TRUE
2329 Default value for IPV6_V6ONLY socket option,
2338 Default: 0 (disabled)
2350 Default: 1 (enabled)
2360 1 automatic flow labels are enabled by default, they can be
2369 Default: 1
2381 Default: 1 (enabled)
2404 Default: 0
2409 Default: 0 (Layer 3)
2444 Default: 0x0007 (source IP, destination IP and IP protocol)
2455 Default: 0 (disabled)
2463 Default: 1 (as specified in RFC7217)
2469 Default: 3 (as specified in RFC7217)
2474 Default: 2 (as specified by RFC3810 9.1)
2484 Default: 8
2492 Default: 8
2498 Default: INT_MAX (unlimited)
2504 Default: INT_MAX (unlimited)
2509 generate this message; IPv6 does by default. Setting this sysctl
2518 Default: 0 (disabled)
2523 default which means route dumps and notifications contain the new
2536 Default: true (backward compat mode)
2551 Default: 0 (Do not emit notifications.)
2567 Default: 0xFFFFFF
2578 Default: 0xFFFFFFFFFFFFFF
2594 ``conf/default/*``:
2595 Change the interface-specific default settings.
2606 Changing this value is same as changing ``conf/default/disable_ipv6``
2634 Default: 0 (disabled)
2652 Default: 0 (disabled)
2677 Functional default:
2683 Learn default router in Router Advertisement.
2685 Functional default:
2691 Route metric for default route learned in Router Advertisement. This value
2692 will be assigned as metric for the default route learned via IPv6 Router
2698 Default: IP6_RT_PRIO_USER i.e. 1024.
2704 Default is to NOT accept these as it may be an un-intended
2707 Functional default:
2720 Default: 1
2728 Default: 0
2733 Functional default:
2749 Default: 0 (disabled)
2765 Default: 0 (disabled)
2773 Functional default:
2784 Functional default:
2792 Functional default:
2801 Functional default:
2809 Functional default:
2820 Default: 0
2826 Functional default:
2834 Default: 1
2851 By default, Host behaviour is assumed. This means:
2854 2. If accept_ra is TRUE (default), transmit Router
2856 3. If accept_ra is TRUE (default), accept Router
2858 4. If accept_redirects is TRUE (default), accept Redirects.
2870 Default: 0 (disabled) if global forwarding is disabled (default),
2874 Default Hop Limit to set.
2876 Default: 64
2879 Default Maximum Transfer Unit
2881 Default: 1280 (IPv6 required minimum)
2892 Default: 0 (disabled)
2898 Default: 60
2904 Default: 1
2909 Default: 4
2915 Default: 3
2927 Default: 0 (disabled)
2938 Default:
2948 Default: 172800 (2 days)
2957 Default: 86400 (1 day)
2964 * 0 : system default
2967 Default: 0 (addresses are removed)
2975 Default: 600
2982 value to less than the default of 2 seconds, but a value less than 2
2985 Default: 2
2991 Default: 5
2999 Default: 16
3006 Default: FALSE (enable IPv6 operation)
3022 1 Enable DAD (default)
3034 Default: FALSE
3058 Default: 0 (disabled)
3061 The IPv6 Traffic Class to use by default when sending IPv6 Neighbor
3068 * 0 - (default)
3074 In most cases this should remain as the default (1).
3081 Default: 1 (enabled)
3087 Default: 10000 (10 seconds)
3093 Default: 1000 (1 second)
3096 * 0 - (default) No enforcement of a MLD version, MLDv1 fallback allowed
3104 * 1 - (default) discard fragmented neighbor discovery packets
3119 Default: 0 (disabled)
3136 Default: 0 (disabled)
3142 be stable privacy ones by default. This can be changed via the
3143 addrgenmode ip-link. conf/default/stable_secret is used as the
3150 By default the stable secret is unset.
3156 0 generate address based on EUI64 (default)
3173 Default: 0 (disabled)
3185 Default: 0 (disabled).
3191 - 0 - (default) Do not accept unsolicited and untracked neighbor
3231 Default: 1 (enabled)
3243 Default: 100
3258 Default: 0-1,3-127 (rate limit ICMPv6 errors except Packet Too Big)
3269 Default: 0 (disabled)
3280 Default: 0 (disabled)
3291 Default: 0 (disabled)
3303 Default: 0 (disabled)
3320 Default: 0x00 (no extensions)
3344 Default: 1 (enabled)
3353 Default: 1 (enabled)
3362 Default: 1 (enabled)
3371 Default: 0 (disabled)
3380 Default: 0 (disabled)
3392 Default: 0
3408 Default: 0 (disabled)
3428 Default: 1
3445 Default: 0
3465 Default: 0
3478 Default: 0 (disabled)
3489 Default: 1 (enabled)
3495 Default: 4
3502 Default: 10
3509 Default: 8
3517 Default: 5
3533 Default: 0
3542 is disabled by initializing 'ps_retrans' per netns as 0xffff by default,
3545 Default: 0xffff
3552 Default: 3000
3558 Default: 60000
3564 Default: 1000
3571 Default: 30000
3577 Default: 200
3580 The default lifetime of the SCTP cookie (in milliseconds). The cookie
3583 Default: 60000
3594 Default: 1 (enabled)
3604 Default: sha256
3620 Default: 0
3628 Default: 0
3639 Default is calculated at boot time from amount of available memory.
3641 sctp_rmem - vector of 3 INTEGERs: min, default, max
3642 Only the first value ("min") is used, "default" and "max" are
3649 Default: 4K
3651 sctp_wmem - vector of 3 INTEGERs: min, default, max
3652 Only the first value ("min") is used, "default" and "max" are
3659 Default: 4K
3671 Default: 1
3686 Default: 0
3689 The default remote UDP encapsulation port.
3692 outgoing UDP-encapsulated SCTP packets by default. Users can also
3702 Default: 0
3714 Default: 0
3727 Default: 0 (disabled)
3743 Default: 0 (disabled)
3757 Default: 1 (enabled)
3771 Default: 1 (enabled)
3786 Default: 10