Lines Matching refs:learning

766 of FDB entries that is active (can be matched by address learning on RX, or FDB
805 learning is a bridging layer service and this is a standalone port, therefore
806 it would consume useless space. With no address learning, the port private
900 learning etc) disabled, and send all received packets to the CPU port only.
905 learning FDB entries in accordance with the software bridge port's state, and
923 hardware learning on the CPU port, and do not override the port STP state.
956   learning. The switch driver is responsible for initial setup of the
957   standalone ports with address learning disabled and egress flooding of all
961   learning should be statically enabled (if supported by the hardware) on the
967   transitioning from an STP state where learning should take place to an STP
968   state where it shouldn't, or when leaving a bridge, or when address learning