Lines Matching refs:PHY

94 device, whether or not an external PHY is attached to the device and
113 	The chip is connected to an external PHY.
122 	Switch to using the simpler PHY polling method which does not
123 	try and read the MII PHY state regularly. This is only available
124 	when using the internal PHY. See the section on link state polling
128 	"Force simple NSR based PHY polling" allows this flag to be
132 PHY Link state polling
137 depending on the version of the chip and on which PHY is being used.
139 For the internal PHY, the original (and currently default) method is
144 To reduce the overhead for the internal PHY, there is now the option
150 When using an external PHY, the driver currently has to poll the MII
160    1) Interrupt on internal PHY state change. This means that the periodic
161       polling of the PHY status may be disabled on these devices when using
162       the internal PHY.
171 state information, the PHY state and the EEPROM.