Lines Matching refs:SW2
804 < | SW1 | | SW2 | |
832 SW2 1-6: Reserved for Future Use
1052 | | | SW2 |
1065 SW2: DIP-Switches for Memory Base and I/O Base addresses
1088 The I/O base address is coded with DIP-Switches 6,7 and 8 of SW2:
1105 DIP Switches 1-5 of SW2 encode the RAM and ROM Address Range:
1378 The eight switches in SW2 are used to set the node ID. Each node attached
1576 SW2 1-8: Node ID Select (ID0-ID7)
1589 The eight switches in SW2 are used to set the node ID. Each node attached
1834 | |SW2| |
1853 SW2 1-8 Node ID Select (ID0-ID7)
1866 The eight switches in SW2 are used to set the node ID. Each node attached
1970 | | SW2 | ON arcNet |
1998 SW2 1-8: Node ID Select
2115 | |SW2 NODE ID| | | | XTAL | |
2144 SW2 1-8 Node ID Select (ID0-ID7)
2156 The eight switches in SW2 are used to set the node ID. Each node attached to
2486 | |o|o|o|o|o|o|o|o| | SW1 || SW2 ||
2552 The first three switches in switch group SW2 are used to select one
2573 Switches 4-6 of switch group SW2 select the Base of the 16K block.
2575 positions, determined by the offset, switches 7 and 8 of group SW2.
2707 The eight switches in group SW2 are used to set the node ID.
2870 SW2 1-8: Node ID Select (ID0-ID7)
2886 The eight switches in SW2 are used to set the node ID. Each node attached
3007 | | SW2 | | |
3041 SW2 1-3: Memory Buffer/PROM Address
3066 The last three switches in switch group SW2 are used to select one
3088 Switches 1-3 of switch group SW2 select the Base of the 16K block.