Lines Matching full:transmitter

5 Pixel data transmitter and receiver drivers
34 Transmitter drivers
37 Transmitter drivers generally need to provide the receiver drivers with the
38 configuration of the transmitter. What is required depends on the type of the
57 link frequency from the transmitter sub-device.
64 to control the transmitter driver's streaming state. These callbacks may not be
68 Stopping the transmitter
71 A transmitter stops sending the stream of images as a result of
78 CSI-2 transmitter drivers
117 As part of transitioning to high speed mode, a CSI-2 transmitter typically
128 One way to address this is to configure the transmitter side explicitly to LP-11
129 or LP-111 state, which requires support from the transmitter hardware. This is
133 The ``.pre_streamon()`` callback may be used to prepare a transmitter for
140 the transmitter to the LP-11 or LP-111 state. This also requires powering on the