Kconfig - OpenGrok cross reference for /linux-6.8/drivers/video/fbdev/Kconfig

1 # SPDX-License-Identifier: GPL-2.0-only
14 	  a well-defined interface, so the software doesn't need to know
15 	  anything about the low-level (hardware register) stuff.
21 	  On several non-X86 architectures, the frame buffer device is the
29 	  and the Framebuffer-HOWTO at
30 	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 	  are compiling a kernel for a non-x86 architecture.
46 	  device-aware may cause unexpected results. If unsure, say N.
57 	  Common utility functions useful to fbdev drivers of VGA-based
83 	  If you have a PCI-based system, this enables support for these
84 	  chips: GD-543x, GD-544x, GD-5480.
107 		Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
125 	  hardware found in Acorn RISC PCs and other ARM-based machines.  If
129 	tristate "CLPS711X LCD support"
140 	bool "SA-1100 LCD support"
144 	  This is a framebuffer device for the SA-1100 LCD Controller.
145 	  See <http://www.linux-fbdev.org/> for information on framebuffer
148 	  If you plan to use the LCD display with your SA-1100 system, say
152 	tristate "Freescale i.MX1/21/25/27 LCD support"
250 	tristate "Arc Monochrome LCD board support"
254 	  This enables support for the Arc Monochrome LCD board. The board
255 	  is based on the KS-108 lcd controller and is typically a matrix
336 	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
340 	tristate "VGA 16-color graphics support"
402 	  graphic cards.  These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
403 	  also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
404 	  TURBOchannel cards, also known as PMAGD-A, -B and -C.
406 	  Due to hardware limitations ZLX-E2 and E3 cards are not supported
410 	  you manage to get it going. ;-)
444 	bool "EFI-based Framebuffer Support"
460 	  This enables support for the Apollo display controller in its
566 	  This is the frame buffer device driver for the SBUS-based Sun ZX
570 	bool "Sun XVR-500 3DLABS Wildcat support"
578 	  This is the framebuffer device for the Sun XVR-500 and similar
585 	bool "Sun XVR-2500 3DLABS Wildcat support"
590 	  This is the framebuffer device for the Sun XVR-2500 and similar
597 	bool "Sun XVR-1000 support"
601 	  This is the framebuffer device for the Sun XVR-1000 and similar
631 	tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
635 	  This enables support for the OpenCores VGA/LCD core.
637 	  The OpenCores VGA/LCD core is typically used together with
657 	tristate "AT91 LCD Controller support"
665 	  This enables support for the AT91 LCD Controller.
696 	  Because fbdev-2.6 requires that drivers must be able to
744 	  Because fbdev-2.6 requires that drivers must be able to
782 	  This driver supports the on-board graphics built in to the Intel 810
804 	  monitor is recommended, but can still work with non-compliant ones.
883 	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
904 	  interconnects Matrox optional devices, like MGA-TVO on G200 and
909 	  second head of G400 or MGA-TVO on G200 or G400.
912 	  i2c-matroxfb.
922 	  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
923 	  head is not compatible with accelerated XFree 3.3.x SVGA servers -
931 	  also load i2c-matroxfb to get it to run.
935 	  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
963 	  https://products.amd.com/en-us/GraphicCardResult.aspx
1032 	  Say Y here to support use of ATI's 64-bit Rage boards (or other
1038 	bool "Mach64 generic LCD support"
1113 	  Because fbdev-2.6 requires that drivers must be able to
1237 	  Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1247 	This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1372 	bool "Au1100 LCD Driver"
1381 	bool "Au1200/Au1300 LCD Driver"
1399 	  This is the framebuffer driver for VIA VT8500 integrated LCD
1400 	  controller.
1403 	bool "Wondermedia WM8xxx-series frame buffer support"
1412 	  This is the framebuffer driver for WonderMedia WM8xxx-series
1413 	  integrated LCD controller. This driver covers the WM8505, WM8650
1432 	  This is the frame buffer device driver for the Hitachi HD64461 LCD
1436 	tristate "PMAG-AA TURBOchannel framebuffer support"
1440 	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1441 	  used mainly in the MIPS-based DECstation series.
1444 	tristate "PMAG-BA TURBOchannel framebuffer support"
1448 	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1449 	  used mainly in the MIPS-based DECstation series.
1452 	tristate "PMAGB-B TURBOchannel framebuffer support"
1456 	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1457 	  in the MIPS-based DECstation series. The card is currently only
1475 	  Olivetti M700-10 systems.
1482 	  Say Y here if you want to support the built-in frame buffer of
1486 	tristate "PXA168/910 LCD framebuffer support"
1491 	  Frame buffer driver for the built-in LCD controller in the Marvell
1495 	tristate "PXA LCD framebuffer support"
1501 	  Frame buffer driver for the built-in LCD controller in the Intel
1516 	bool "PXA Smartpanel LCD support"
1520 	bool "PXA LCD command line parameters"
1524 	  to configure the physical properties of the LCD panel when
1525 	  using the PXA LCD driver.
1539 	  Kernelspace driver for the 2D graphics controller unit (GCU)
1563 	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
1571 	  Frame buffer driver for the built-in FB controller in the Samsung
1594 	  Frame buffer driver for the CRT and LCD controllers in the Silicon
1611 	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1612 	  mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1624 	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1625 	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1663 	  framebuffer. ML300 carries a 640*480 LCD display on the board,
1675 	tristate "Cobalt server LCD frame buffer support"
1686 	  (D)STN/TFT LCD Controller.
1693 	tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
1701 	  This is the frame buffer device driver for the TI LCD controller
1702 	  found on DA8xx/OMAP-L1xx/AM335x SoCs.
1732 	  This driver implements the front-end of the Xen virtual
1733 	  frame buffer driver.  It communicates with a back-end
1737 	tristate "E-Ink Metronome/8track controller support"
1741 	  This driver implements support for the E-Ink Metronome
1742 	  controller. The pre-release name for this device was 8track
1743 	  and could also have been called by some vendors as PVI-nnnn.
1752 	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1759 	bool "Carmine/Coral-P(A) GDC"
1762 	  This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1763 	  PCI graphics controller devices.
1781 	  Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1782 	  driver to support accessing I2C devices on controller's I2C bus.
1792 	  ep93xx-fb.
1802 	tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1806 	  This driver implements support for the E-Ink Broadsheet
1807 	  controller. The release name for this device was Epson S1D13521
1812 	tristate "Microsoft Hyper-V Synthetic Video support"
1818 	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1827 	  Say Y if you want support for a simple frame-buffer.
1831 	  pre-allocated frame buffer surface.
1844 	  OLED controller over I2C.