Kconfig - OpenGrok cross reference for /linux-6.8/drivers/video/fbdev/Kconfig

1 # SPDX-License-Identifier: GPL-2.0-only
14 	  a well-defined interface, so the software doesn't need to know
15 	  anything about the low-level (hardware register) stuff.
21 	  On several non-X86 architectures, the frame buffer device is the
29 	  and the Framebuffer-HOWTO at
30 	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 	  are compiling a kernel for a non-x86 architecture.
46 	  device-aware may cause unexpected results. If unsure, say N.
57 	  Common utility functions useful to fbdev drivers of VGA-based
83 	  If you have a PCI-based system, this enables support for these
84 	  chips: GD-543x, GD-544x, GD-5480.
107 		Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
125 	  hardware found in Acorn RISC PCs and other ARM-based machines.  If
140 	bool "SA-1100 LCD support"
144 	  This is a framebuffer device for the SA-1100 LCD Controller.
145 	  See <http://www.linux-fbdev.org/> for information on framebuffer
148 	  If you plan to use the LCD display with your SA-1100 system, say
172 	bool "DDC for CyberPro support"
177 	  Say Y here if you want DDC support for your CyberPro graphics
178 	  card. This is only I2C bus support, driver does not use EDID.
181 	bool "CyberPro 2000/2010/5000 I2C support"
182 	depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
183 	depends on I2C=y || FB_CYBER2000=m
186 	  Enable support for the I2C video decoder interface on the
255 	  is based on the KS-108 lcd controller and is typically a matrix
336 	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
340 	tristate "VGA 16-color graphics support"
402 	  graphic cards.  These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
403 	  also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
404 	  TURBOchannel cards, also known as PMAGD-A, -B and -C.
406 	  Due to hardware limitations ZLX-E2 and E3 cards are not supported
410 	  you manage to get it going. ;-)
444 	bool "EFI-based Framebuffer Support"
566 	  This is the frame buffer device driver for the SBUS-based Sun ZX
570 	bool "Sun XVR-500 3DLABS Wildcat support"
578 	  This is the framebuffer device for the Sun XVR-500 and similar
585 	bool "Sun XVR-2500 3DLABS Wildcat support"
590 	  This is the framebuffer device for the Sun XVR-2500 and similar
597 	bool "Sun XVR-1000 support"
601 	  This is the framebuffer device for the Sun XVR-1000 and similar
688 	bool "Enable DDC Support"
692 	  This enables I2C support for nVidia Chipsets.  This is used
696 	  Because fbdev-2.6 requires that drivers must be able to
736 	bool "Enable DDC Support"
740 	  This enables I2C support for nVidia Chipsets.  This is used
744 	  Because fbdev-2.6 requires that drivers must be able to
782 	  This driver supports the on-board graphics built in to the Intel 810
804 	  monitor is recommended, but can still work with non-compliant ones.
815 	bool "Enable DDC Support"
819 	  Add DDC/I2C support for i810fb.  This will allow the driver to get
878 	  "Matrox I2C support" and "G400 second head support" right below.
883 	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
898 	tristate "Matrox I2C support"
902 	  This drivers creates I2C buses which are needed for accessing the
903 	  DDC (I2C) bus present on all Matroxes, an I2C bus which
904 	  interconnects Matrox optional devices, like MGA-TVO on G200 and
905 	  G400, and the secondary head DDC bus, present on G400 only.
909 	  second head of G400 or MGA-TVO on G200 or G400.
912 	  i2c-matroxfb.
922 	  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
923 	  head is not compatible with accelerated XFree 3.3.x SVGA servers -
931 	  also load i2c-matroxfb to get it to run.
935 	  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
963 	  https://products.amd.com/en-us/GraphicCardResult.aspx
966 	bool "DDC/I2C for ATI Radeon support"
971 	  Say Y here if you want DDC/I2C support for your Radeon board.
1032 	  Say Y here to support use of ATI's 64-bit Rage boards (or other
1078 	bool "DDC for S3 support"
1083 	  Say Y here if you want DDC support for your S3 graphics card.
1109 	  This enables I2C support for S3 Savage Chipsets.  This is used
1113 	  Because fbdev-2.6 requires that drivers must be able to
1159 	depends on FB && PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST)
1237 	  Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1247 	This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1251 	bool "Enable DDC/I2C support"
1256 	  Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
1403 	bool "Wondermedia WM8xxx-series frame buffer support"
1412 	  This is the framebuffer driver for WonderMedia WM8xxx-series
1436 	tristate "PMAG-AA TURBOchannel framebuffer support"
1440 	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1441 	  used mainly in the MIPS-based DECstation series.
1444 	tristate "PMAG-BA TURBOchannel framebuffer support"
1448 	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1449 	  used mainly in the MIPS-based DECstation series.
1452 	tristate "PMAGB-B TURBOchannel framebuffer support"
1456 	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1457 	  in the MIPS-based DECstation series. The card is currently only
1475 	  Olivetti M700-10 systems.
1482 	  Say Y here if you want to support the built-in frame buffer of
1491 	  Frame buffer driver for the built-in LCD controller in the Marvell
1501 	  Frame buffer driver for the built-in LCD controller in the Intel
1563 	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
1571 	  Frame buffer driver for the built-in FB controller in the Samsung
1611 	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1612 	  mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1624 	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1625 	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1693 	tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
1702 	  found on DA8xx/OMAP-L1xx/AM335x SoCs.
1732 	  This driver implements the front-end of the Xen virtual
1733 	  frame buffer driver.  It communicates with a back-end
1737 	tristate "E-Ink Metronome/8track controller support"
1741 	  This driver implements support for the E-Ink Metronome
1742 	  controller. The pre-release name for this device was 8track
1743 	  and could also have been called by some vendors as PVI-nnnn.
1752 	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1759 	bool "Carmine/Coral-P(A) GDC"
1762 	  This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1771 	  Framebuffer support for Fujitsu Lime GDC on host CPU bus.
1776 	bool "Support I2C bus on MB862XX GDC"
1777 	depends on FB_MB862XX && I2C
1778 	depends on FB_MB862XX=m || I2C=y
1781 	  Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1782 	  driver to support accessing I2C devices on controller's I2C bus.
1792 	  ep93xx-fb.
1802 	tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1806 	  This driver implements support for the E-Ink Broadsheet
1812 	tristate "Microsoft Hyper-V Synthetic Video support"
1818 	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1827 	  Say Y if you want support for a simple frame-buffer.
1831 	  pre-allocated frame buffer surface.
1838 	depends on FB && I2C
1844 	  OLED controller over I2C.