Lines Matching +full:pci +full:- +full:based
1 # SPDX-License-Identifier: GPL-2.0-only
14 a well-defined interface, so the software doesn't need to know
15 anything about the low-level (hardware register) stuff.
21 On several non-X86 architectures, the frame buffer device is the
29 and the Framebuffer-HOWTO at
30 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
57 Common utility functions useful to fbdev drivers of VGA-based
73 depends on FB && (ZORRO || PCI)
80 This enables support for Cirrus Logic GD542x/543x based boards on
83 If you have a PCI-based system, this enables support for these
84 chips: GD-543x, GD-544x, GD-5480.
93 depends on FB && ((AMIGA && BROKEN) || PCI)
100 This is the frame buffer device driver for cards based on
104 ELSA Gloria Synergy PCI
105 Appian Jeronimo PRO (both heads) PCI
106 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
107 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
115 depends on FB_PM2 && PCI
125 hardware found in Acorn RISC PCs and other ARM-based machines. If
140 bool "SA-1100 LCD support"
144 This is a framebuffer device for the SA-1100 LCD Controller.
145 See <http://www.linux-fbdev.org/> for information on framebuffer
148 If you plan to use the LCD display with your SA-1100 system, say
162 depends on FB && PCI && (BROKEN || !SPARC64)
255 is based on the KS-108 lcd controller and is typically a matrix
275 depends on FB && PPC && (!PPC_PSERIES || PCI)
313 depends on (FB = y) && PPC32 && PCI
322 depends on (FB = y) && PCI
330 depends on (FB = y) && PCI
336 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
340 tristate "VGA 16-color graphics support"
392 depends on PCI || TC
402 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
403 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
404 TURBOchannel cards, also known as PMAGD-A, -B and -C.
406 Due to hardware limitations ZLX-E2 and E3 cards are not supported
410 you manage to get it going. ;-)
444 bool "EFI-based Framebuffer Support"
497 Say Y if you want support for SBUS or UPA based frame buffer device.
566 This is the frame buffer device driver for the SBUS-based Sun ZX
570 bool "Sun XVR-500 3DLABS Wildcat support"
571 depends on (FB = y) && PCI && SPARC64
578 This is the framebuffer device for the Sun XVR-500 and similar
579 graphics cards based upon the 3DLABS Wildcat chipset. The driver
585 bool "Sun XVR-2500 3DLABS Wildcat support"
586 depends on (FB = y) && PCI && SPARC64
590 This is the framebuffer device for the Sun XVR-2500 and similar
591 graphics cards based upon the 3DLABS Wildcat chipset. The driver
597 bool "Sun XVR-1000 support"
601 This is the framebuffer device for the Sun XVR-1000 and similar
669 depends on FB && PCI
696 Because fbdev-2.6 requires that drivers must be able to
717 depends on FB && PCI
744 Because fbdev-2.6 requires that drivers must be able to
765 depends on FB && PCI
772 This driver supports graphics cards based on Intel740 chip.
776 depends on FB && PCI && X86_32 && AGP_INTEL
782 This driver supports the on-board graphics built in to the Intel 810
804 monitor is recommended, but can still work with non-compliant ones.
826 depends on FB && PCI
871 Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
883 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
904 interconnects Matrox optional devices, like MGA-TVO on G200 and
909 second head of G400 or MGA-TVO on G200 or G400.
912 i2c-matroxfb.
922 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
923 head is not compatible with accelerated XFree 3.3.x SVGA servers -
931 also load i2c-matroxfb to get it to run.
935 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
948 depends on FB && PCI
959 a framebuffer device. There are both PCI and AGP versions. You
963 https://products.amd.com/en-us/GraphicCardResult.aspx
990 depends on FB && PCI
1011 tristate "ATI Mach64 display support" if PCI || ATARI
1019 select FB_ATY_CT if SPARC64 && PCI
1030 depends on PCI && FB_ATY
1032 Say Y here to support use of ATI's 64-bit Rage boards (or other
1033 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1045 bool "Mach64 GX support" if PCI
1050 board (or other boards based on the Mach64 GX chipset) as a
1064 depends on FB && PCI
1087 depends on FB && PCI
1096 This driver supports notebooks and computers with S3 Savage PCI/AGP
1113 Because fbdev-2.6 requires that drivers must be able to
1127 depends on FB && PCI
1159 depends on FB && PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST)
1199 depends on FB && PCI
1208 This driver supports notebooks with NeoMagic PCI chips.
1216 depends on FB && PCI
1220 Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1228 depends on FB && PCI
1237 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1247 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1260 depends on FB && PCI
1266 Voodoo2 (cvg) based graphics card.
1278 depends on FB && PCI
1294 depends on FB && PCI
1303 This is the frame buffer device driver for Trident PCI/AGP chipsets.
1318 depends on FB && PCI
1329 Driver for PCI graphics boards with ARK 2000PV chip
1334 depends on FB && PCI
1348 depends on FB && PCI
1403 bool "Wondermedia WM8xxx-series frame buffer support"
1412 This is the framebuffer driver for WonderMedia WM8xxx-series
1436 tristate "PMAG-AA TURBOchannel framebuffer support"
1440 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1441 used mainly in the MIPS-based DECstation series.
1444 tristate "PMAG-BA TURBOchannel framebuffer support"
1448 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1449 used mainly in the MIPS-based DECstation series.
1452 tristate "PMAGB-B TURBOchannel framebuffer support"
1456 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1457 in the MIPS-based DECstation series. The card is currently only
1475 Olivetti M700-10 systems.
1482 Say Y here if you want to support the built-in frame buffer of
1491 Frame buffer driver for the built-in LCD controller in the Marvell
1501 Frame buffer driver for the built-in LCD controller in the Intel
1563 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1571 Frame buffer driver for the built-in FB controller in the Samsung
1611 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1612 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1624 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1625 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1635 GXT4500P/6500P display adaptor based on Raster Engine RC1000,
1693 tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
1702 found on DA8xx/OMAP-L1xx/AM335x SoCs.
1732 This driver implements the front-end of the Xen virtual
1733 frame buffer driver. It communicates with a back-end
1737 tristate "E-Ink Metronome/8track controller support"
1741 This driver implements support for the E-Ink Metronome
1742 controller. The pre-release name for this device was 8track
1743 and could also have been called by some vendors as PVI-nnnn.
1748 depends on PCI || (OF && PPC)
1752 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1759 bool "Carmine/Coral-P(A) GDC"
1760 depends on PCI
1762 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1763 PCI graphics controller devices.
1781 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1792 ep93xx-fb.
1802 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1806 This driver implements support for the E-Ink Broadsheet
1812 tristate "Microsoft Hyper-V Synthetic Video support"
1818 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1827 Say Y if you want support for a simple frame-buffer.
1831 pre-allocated frame buffer surface.
1848 depends on FB && PCI