Lines Matching +full:esp32s3 +full:- +full:uart
1 # SPDX-License-Identifier: GPL-2.0
19 comment "Non-8250 serial port support"
26 This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
37 Say Y here if you wish to use an AMBA PrimeCell UART as the system
53 This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
65 Say Y here if you wish to use an AMBA PrimeCell UART as the system
89 bool "Early console using RISC-V SBI"
95 Support for early debug console using RISC-V SBI. This enables
101 tristate "BCM1xxx on-chip DUART serial support"
107 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
113 the module will be called sb1250-duart.
129 bool "AT91 on-chip serial port support"
136 This enables the driver for the on-chip UARTs of the Atmel
145 Say Y here if you wish to use an on-chip UART on a Atmel
180 Say Y if you have an external 8250/16C550 UART. If unsure, say N.
206 This enables the driver for the on-chip UARTs of the Amlogic
215 Say Y here if you wish to use a Amlogic MesonX UART as the
226 This enables the driver for the on-chip UARTs of the Cirrus
244 Support for the on-chip UARTs on the Samsung
256 Select the number of available UART ports for the Samsung S3C
265 Allow selection of the S3C24XX on-board serial ports for use as
280 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
287 tristate "NVIDIA Tegra Combined UART"
292 Support for the mailbox-based TCU (Tegra Combined UART) serial port.
323 This selects support for an advanced UART from Maxim (Dallas).
326 that can be controlled through I2C or high-speed SPI.
336 DZ11-family serial controllers for DECstations and VAXstations,
683 bool "Enable LPC32XX high speed UART serial console"
744 the pmac_zilog and 8250 drivers to co-exist, but may cause
746 access the built-in serial ports on powermacs will need to
751 unable to use the 8250 module for PCMCIA or other 16C550-style
779 Say Y here if you wish to use a SCC or SMC CPM UART as the system
883 box, for instance in order to become a dial-in server. This driver
892 tristate "MSM on-chip serial port support"
903 tristate "QCOM on-chip GENI based serial port support"
918 bool "VIA VT8500 on-chip serial port support"
936 with the omap-serial driver. DMA support can be enabled from platform
955 tristate "SiFive UART support"
961 contains a SiFive UART IP block. This type of UART is present on
965 bool "Console on SiFive UART"
971 Select this option if you would like to use a SiFive UART as the
986 Support for UART on Lantiq and Intel SoCs.
991 bool "Console on Lantiq UART"
996 Select this option if you would like to use a Lantiq UART as the
1012 This selects support for an advanced UART from NXP (Philips).
1061 tristate "Support for timberdale UART"
1065 Add support for UART controller on timberdale.
1068 tristate "Broadcom BCM63xx/BCM33xx UART support"
1073 This enables the driver for the onchip UART core found on
1079 BCM7xxx (STB) - DOCSIS console
1105 tristate "Altera JTAG UART support"
1108 This driver supports the Altera JTAG UART port.
1111 bool "Altera JTAG UART console support"
1116 Enable a Altera JTAG UART port to be the system console.
1127 tristate "Altera UART support"
1130 This driver supports the Altera softcore UART port.
1133 int "Maximum number of Altera UART ports"
1138 UART ports. The usual default varies from board to board, and
1142 int "Default baudrate for Altera UART ports"
1147 Altera UART ports. The usual default varies from board to board,
1151 bool "Altera UART console support"
1156 Enable a Altera UART port to be the system console.
1159 tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
1163 This driver is for PCH(Platform controller Hub) UART of Intel EG20T
1165 Enabling PCH_DMA, this PCH UART works as DMA mode.
1169 ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1175 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1179 Say Y here if you wish to use the PCH UART as the system console
1190 UART (AUART) port.
1200 tristate "Cadence (Xilinx Zynq) UART support"
1204 This driver supports the Cadence UART. It is found e.g. in Xilinx
1208 bool "Cadence UART console support"
1213 Enable a Cadence UART port to be the system console.
1222 built-in UART of the SoC, say Y to this option.
1232 Enable a built-in UART port of the AR933X to be the system console.
1243 bool "MPS2 UART console support"
1249 bool "MPS2 UART port"
1253 This driver support the UART ports on ARM MPS2.
1256 tristate "ARC UART driver support"
1259 Driver for on-chip UART for ARC(Synopsys) for the legacy
1263 bool "Console on ARC UART"
1268 Enable system Console on ARC UART
1271 int "Number of ARC UART ports"
1308 Support for the on-chip lpuart on some Freescale SOCs.
1320 tristate "Freescale LINFlexD UART serial port support"
1324 Support for the on-chip LINFlexD UART on some Freescale SOCs.
1327 bool "Console on Freescale LINFlexD UART serial port"
1332 If you have enabled the LINFlexD UART serial port on the Freescale
1340 Support for the on-chip USART on Conexant Digicolor SoCs.
1355 This driver is for the on-chip Asynchronous Serial Controller on
1372 Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
1386 bool "Spreadtrum UART console support"
1402 This driver is for the on-chip Serial Controller on
1421 This driver is for Marvell EBU SoC's UART. If you have a machine
1422 based on the Armada-3700 SoC and wish to use the on-board serial
1434 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1444 This driver is for Actions Semiconductor S500/S900 SoC's UART.
1445 Say 'Y' here if you wish to use the on-board serial port.
1455 Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
1463 This driver is for RDA8810PL SoC's UART.
1464 Say 'Y' here if you wish to use the on-board serial port.
1474 Say 'Y' here if you wish to use the RDA8810PL UART as the system
1478 tristate "Milbeaut USIO/UART serial port support"
1483 This selects the USIO/UART IP found in Socionext Milbeaut SoCs.
1486 int "Maximum number of CSIO/UART ports (1-8)"
1492 bool "Support for console on MILBEAUT USIO/UART serial port"
1498 Say 'Y' here if you wish to use a USIO/UART of Socionext Milbeaut
1510 This driver is for the FPGA-based LiteUART serial controller from LiteX
1530 Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
1537 tristate "Sunplus UART support"
1546 called sunplus-uart.
1549 bool "Console on Sunplus UART"
1554 Select this option if you would like to use a Sunplus UART as the
1562 tristate "Nuvoton MA35D1 family UART support"
1566 This driver supports Nuvoton MA35D1 family UART ports. If you would
1573 bool "Console on a Nuvotn MA35D1 family UART port"
1577 Select this options if you'd like to use the UART port0 of the
1585 tristate "Espressif ESP32 UART support"
1591 Driver for the UART controllers of the Espressif ESP32xx SoCs.
1604 Driver for the CDC ACM gadget controller of the Espressif ESP32S3