Lines Matching +full:access +full:- +full:controllers

1 # SPDX-License-Identifier: GPL-2.0-only
29 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
70 comment "SCSI support type (disk, tape, CD-ROM)"
81 the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
82 the Disk-HOWTO and the Multi-Disk-HOWTO, available from
84 CD-ROMs.
100 SCSI-HOWTO, available from
103 for SCSI CD-ROMs.
114 by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
115 and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>.
117 Make sure to say Y or M to "ISO 9660 CD-ROM file system support".
127 If you want to use SCSI scanners, synthesizers or CD-writers or just
129 CD-ROMs or tapes, say Y here. These won't be supported by the kernel
133 For scanners, look at SANE (<http://www.sane-project.org/>). For CD
141 <file:Documentation/scsi/scsi-generic.rst> for more information.
156 This option is required by UDEV to access device serial numbers, etc.
166 don't need this for those tiny 6-slot cdrom changers. Media
169 here. Check <file:Documentation/scsi/scsi-changer.rst> for details.
227 busses in parallel, leading to a significant speed-up.
242 If you wish to export transport-specific information about
251 If you wish to export transport-specific information about
260 If you wish to export transport-specific information about
269 If you wish to export transport-specific information about
278 If you wish to export transport-specific information about
284 bool "SCSI low-level drivers"
298 The iSCSI Driver provides a host with the ability to access storage
312 http://open-iscsi.org
336 tristate "3ware 5/6/7/8xxx ATA-RAID support"
339 3ware is the only hardware ATA-Raid product in Linux to date.
346 <file:drivers/scsi/3w-xxxx.c>.
354 This driver supports HP Smart Array Controllers (circa 2009).
356 driver. Anyone wishing to use HP Smart Array controllers who
361 tristate "3ware 9xxx SATA-RAID support"
364 This driver supports the 9000 series 3ware SATA-RAID cards.
369 <file:drivers/scsi/3w-9xxx.c>.
372 tristate "3ware 97xx SAS/SATA-RAID support"
375 This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards.
380 <file:drivers/scsi/3w-sas.c>.
397 This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
398 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
401 It is explained in section 3.3 of the SCSI-HOWTO, available from
413 3.4 of the SCSI-HOWTO, available from
427 3.5 of the SCSI-HOWTO, available from
480 This is an ARECA-maintained driver by Erich Chen.
499 controllers.
509 Adapters. Consult the SCSI-HOWTO, available from
513 Note that support for FlashPoint is only available for 32-bit
534 eXtremeRAID PCI RAID controllers. This driver supports the
550 eXtremeRAID PCI RAID controllers. This driver supports the
551 newer, SCSI-based interface only.
572 The XEN SCSI frontend driver allows the kernel to access SCSI Devices
575 SCSI access to a device is needed.
578 tristate "Microsoft Hyper-V virtual storage driver"
583 Select this option to enable the Hyper-V virtual storage driver.
610 This is support for the Cisco PCI-Express FCoE HBA.
620 This is support for the Cisco PCI-Express SCSI HBA.
648 tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support"
652 This is support for Future Domain's PCI SCSI host adapters (TMC-3260)
654 (Adaptec AHA-2920A).
656 NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
659 Adaptec AHA-2920A boards with a Future Domain chip on them.
670 This is support for Future Domain's 16-bit SCSI host adapters
671 (TMC-1660/1680, TMC-1650/1670, TMC-1610M/MER/MEX) and other adapters
672 with ISA bus based on the Future Domain chipsets (Quantum ISA-200S,
673 ISA-250MG; and at least one IBM board).
692 This is a driver for old ISA card SCSI controllers based on a
695 various 8-bit and 16-bit ISA cards bundled with SCSI scanners.
704 This is support for the IBM ServeRAID hardware RAID controllers.
706 and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
765 read the SCSI-HOWTO, available from
772 tristate "Initio INI-A100U2W support"
775 This is support for the Initio INI-A100U2W SCSI host adapter.
776 Please read the SCSI-HOWTO, available from
783 tristate "IOMEGA parallel port (ppa - older drives)"
796 then you should say N here and Y to "IOMEGA parallel port (imm -
801 the SCSI-HOWTO, which is available from
811 tristate "IOMEGA parallel port (imm - newer drives)"
824 here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
828 the SCSI-HOWTO, which is available from
838 bool "ppa/imm option - Assume slow parport control register"
857 many PA-RISC workstations & servers. If you do not know whether you
878 This driver supports Promise SuperTrak EX series storage controllers.
881 controllers. Please visit <http://www.promise.com> to download.
897 PCI-SCSI controllers. It also supports the subset of LSI53C10XX
898 Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
899 language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
900 controllers; you need to use the Fusion MPT driver for that.
910 This option only applies to PCI-SCSI chips that are PCI DAC
911 capable (875A, 895A, 896, 1010-33, 1010-66, 1000).
914 32-bit DMA. When set to 1, the chip will be able to perform DMA
916 full 64-bit DMA address range, but can only address 16 segments
947 This value is used as a compiled-in hard limit.
993 PA-RISC processor and the NCR 53c720 SCSI controller on C100,
994 C110, J200, J210 and some D, K & R-class machines. It's also
995 used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
1003 "Tagged command queuing" is a feature of SCSI-2 which improves
1046 The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
1047 rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers
1048 are respectively the maximum data transfer rates in mega-transfers
1049 per second for each class. For example, a FAST-20 Wide 16 device is
1060 Your answer to this question is ignored for controllers with NVRAM,
1061 since the driver will get this information from the user set-up. It
1064 for FAST-20 synchronous data transfer (20 mega-transfers per
1080 device of yours to not support properly the target-disconnect
1099 SCSI-HOWTO, available from
1118 This driver supports SBUS SCSI controllers from PTI or QLogic. These
1119 controllers are known under Solaris as qpti and in the openprom as
1120 PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
1168 TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
1195 tristate "Workbit NinjaSCSI-32Bi/UDE support"
1198 This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
1199 SCSI host adapter. Please read the SCSI-HOWTO, available from
1211 SCSI controllers (based on WD33C296A chip).
1277 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
1285 built-in SCSI controller, say Y. Otherwise, say N.
1307 answer N. This driver does NOT work for the T-Rex series of
1308 accelerators from TekMagic and GVP-M.
1319 built-in SCSI controller, say Y. Otherwise, say N.
1329 Support for various NCR53c710-based SCSI controllers on Zorro
1332 - the Amiga 4091 Zorro III SCSI-2 controller,
1333 - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
1336 - the SCSI controller on the Phase5 Blizzard PowerUP 603e+
1338 - the SCSI controller on the GVP Turbo 040/060 accelerator.
1346 Support for various NCR53C9x (ESP) based SCSI controllers on Zorro
1349 - the Phase5 Blizzard 1230 II and IV SCSI controllers,
1350 - the Phase5 Blizzard 2060 SCSI controller,
1351 - the Phase5 Blizzard Cyberstorm and Cyberstorm II SCSI
1352 controllers,
1353 - the Fastlane Zorro III SCSI controller.
1360 If you have an Atari with built-in NCR5380 SCSI controller (TT,
1370 ST-DMA, replacing ACSI). It does NOT support other schemes, like
1380 SCSI-HOWTO, available from
1400 Support for the on-board SCSI controller on the Motorola MVME147
1401 single-board computer.
1428 "Sun3" type VME scsi controllers also based on the NCR5380.
1437 The ESP was an on-board SCSI controller used on Sun 3/80
1446 chipset is present in most SPARC SBUS-based computers and
1458 If you want to access SCSI devices attached to your IBM mainframe by
1466 Commands", SC33-8411.
1480 tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver"
1484 This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip
1498 tristate "virtio-scsi support"