ath/ath12k/rx_desc.h

186  *		Field only valid when for the received frame type the corresponding
190  *		Field only valid when for the received frame type the corresponding
254  *		Field only valid when AST_based_lookup_valid == 1.
277  *		Field only valid when key_type is set to wep_varied_width.
285  *		Field only valid when bssid_hit is set.
290  *		Field only valid when mpdu_qos_control_valid is set
322  *		When set, AST based lookup for this frame has found a valid
347  *		When set, the field Mpdu_Frame_control_field has valid information
350  *		When set, the field Mpdu_duration_field has valid information
353  *		When set, the fields mac_addr_adx_..... have valid information
358  *		have valid information as well as field
364  *		When set, the field mpdu_qos_control_field, mpdu_ht_control has valid
371  *		PN are valid
376  *		Field only valid when Mpdu_sequence_control_valid is set
386  *		Field only valid when Mpdu_frame_control_valid is set
391  *		Field only valid when Mpdu_frame_control_valid is set
396  *		Field only valid when Mpdu_frame_control_valid is set.
400  *		Field only valid when Mpdu_frame_control_valid is set.
401  *		Retry bit from the frame control.  Only valid when first_msdu is set
404  *		Field only valid when Mpdu_sequence_control_valid is set.
409  *		Field only valid when Frame_encryption_info_valid is set
462  *		0.  The PPDU start status will only be valid when this bit
472  *		Only valid when first_msdu is set. Indicates no AST matching
476  *		Only valid when first_msdu is set. Indicates an unsuccessful
532  *		Frame control field in header. Only valid when the field is marked valid.
535  *		Duration field in header. Only valid when the field is marked valid.
538  *		MAC addresses in the received frame. Only valid when corresponding
539  *		address valid bit is set
542  *		QoS/HT control fields from header. Valid only when corresponding fields
543  *		are marked valid
569  *		Multi-link receiver address1,2. Only valid when corresponding
570  *		valid bit is set
868  *		MPDU length before decapsulation. Only valid when first_msdu is
900  *		da_offset field is valid. This will be set to 0 in case
904  *		sa_offset field is valid. This will be set to 0 in case
947  *		Indicates that OLE found a valid SA entry.
950  *		Indicates that OLE found a valid DA entry.
953  *		Field Only valid if da_is_valid is set. Indicates the DA address
968  *		valid when last_msdu is set.
1058  *		flow id is not valid.
1074  *		The key ID octet from the IV. Only valid when first_msdu is set.
1117  *		This field is still valid for MPDU frames without A-MSDU.
1130  *		decapsulation. The latter is only valid if ipv4_proto or
1138  *		L4 offset in bytes from the start of RX_HEADER (only valid
1141  *		the start of the IP header after decapsulation (Only valid if
1231  *		Field only valid when pkt type is HT, VHT or HE. Values are
1246  *		Field only valid when
1262  *		are all valid.  This bit is in the last 64-bit of the descriptor
1305  *		0.  The PPDU start status will only be valid when this bit
1315  *		Only valid when first_msdu is set. Indicates no AST matching
1319  *		Only valid when first_msdu is set. Indicates an unsuccessful
1434  *		flow id is not valid.
1448  *		valid.  This bit must be in the last octet of the