ath/ath12k/rx_desc.h

209  *		Indicates to RXDMA to ignore the REO_destination_indication
237  *		Indicates the MPDU queue ID to which this MPDU link
241  *		Indicates that a delimiter FCS error was found in between the
248  *		Indicates that the first delimiter had a FCS failure.
272  *		Indicates type of decrypt cipher used (as defined in the
286  *		This number indicates which one out of the 8 BSSID register
298  *		Field indicates what the reason was that this mpdu frame
334  *		This field indicates the index of the AST entry corresponding
337  *		A value of 0xFFFF indicates an invalid AST index, meaning
343  *		This field indicates a unique peer identifier. It is set
458  *		Indicates the first MSDU of the PPDU.  If both first_mpdu
472  *		Only valid when first_msdu is set. Indicates no AST matching
476  *		Only valid when first_msdu is set. Indicates an unsuccessful
488  *		Set if frame type indicates either null data or QoS null
519  *		Indicates that this data type frame is not encrypted even if
851  *		Field indicates what the reason was that this mpdu frame
874  *		Indicates the super filter rule.
933  *		Indicates an unsuccessful MAC source address search due to the
937  *		Indicates an unsuccessful MAC destination address search due to
947  *		Indicates that OLE found a valid SA entry.
950  *		Indicates that OLE found a valid DA entry.
953  *		Field Only valid if da_is_valid is set. Indicates the DA address
961  *		Indicates the first MSDU of A-MSDU. If both first_msdu and
967  *		Indicates the last MSDU of the A-MSDU. MPDU end status is only
974  *		Indicates that the computed checksum did not match the
1001  *		Indicates to RXDMA to ignore the REO_destination_indication
1017  *		Indicates that this is an 802.11 fragment frame.  This is
1045  *		Indicates that the computed checksum (tcp_udp_chksum) did
1049  *		Indicates that the MSDU threshold was exceeded and thus all the
1054  *		Indicates an unsuccessful flow search due to the expiring of
1061  *		Indicates that this status has a corresponding MSDU that
1090  *		operation. This indicates into which chip's TCL the packet should be
1127  *		Depending upon mode bit, this field either indicates the
1137  *		Depending upon mode bit, this field either indicates the
1139  *		if either ipv4_proto or ipv6_proto is set to 1) or indicates
1142  *		tcp_proto or udp_proto is set). The value 0 indicates that
1146  *		Indicates the MSDU number within a MPDU.  This value is
1151  *		Indicates the format after decapsulation. Values are defined in
1155  *		Set if L2 layer indicates IPv4 protocol.
1158  *		Set if L2 layer indicates IPv6 protocol.
1162  *		indicates TCP.
1166  *		indicates UDP.
1169  *		Indicates that either the IP More frag bit is set or IP frag
1170  *		number is non-zero.  If set indicates that this is a fragmented
1242  *		Indicates what type of reception this is and defined in enum
1259  *		If set indicates that the RX packet data, RX header data,
1280  *		Timestamp that indicates when the PPDU that contained this MPDU
1301  *		Indicates the first MSDU of the PPDU.  If both first_mpdu
1315  *		Only valid when first_msdu is set. Indicates no AST matching
1319  *		Only valid when first_msdu is set. Indicates an unsuccessful
1331  *		Set if frame type indicates either null data or QoS null
1360  *		Indicates that the WiFi frame has one of the following errors
1376  *		Indicates that the computed checksum (tcp_udp_chksum) did
1380  *		Indicates that the computed checksum did not match the
1384  *		Indicates no matching entry was found in the address search
1388  *		Indicates no matching entry was found in the address search
1392  *		Indicates that an A-MSDU with 'from DS = 0' had an SA mismatching
1396  *		Indicates that RX packet is not decrypted as Crypto is busy
1400  *		Indicates that this data type frame is not encrypted even if
1411  *		Indicates that at least one of the rx buffers has been
1416  *		Indicates that the MPDU was pre-maturely terminated
1421  *		Indicates that the MPDU Michael integrity check failed
1424  *		Indicates that the MPDU decrypt integrity check failed
1427  *		Indicates that the MPDU FCS check failed
1430  *		Indicates an unsuccessful flow search due to the expiring of
1445  *		If set indicates that the RX packet data, RX header data, RX