Lines Matching +full:phy +full:- +full:is +full:- +full:integrated
1 # SPDX-License-Identifier: GPL-2.0-only
3 # PHY Layer Configuration
12 PHYlink models the link between the PHY and MAC, allowing fixed
17 tristate "PHY Device support and infrastructure"
22 Ethernet controllers are usually attached to PHY
24 managing PHY devices.
35 Adds support for a set of LED trigger events per-PHY. Link
38 supported by the PHY and also a one common "link" trigger as a
39 logical-or of all the link speed ones.
41 <mii bus id>:<phy>:<speed>
43 Where speed is in the form:
45 for any speed known to the PHY.
51 When LED class support is enabled, phylib can automatically
55 tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
61 Currently tested with mpc866ads and mpc8349e-mitx.
68 Adds support needed for PHY drivers written in Rust. It provides
77 comment "MII PHY device drivers"
85 tristate "Amlogic Meson GXL Internal PHY"
89 Currently has a driver for the Amlogic Meson GXL Internal PHY
96 - ADIN1200 - Robust,Industrial, Low Power 10/100 Ethernet PHY
97 - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
98 Ethernet PHY
105 - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
107 source "drivers/net/phy/aquantia/Kconfig"
112 Currently supports the Asix Electronics PHY found in the X-Surf 100
120 The features are equivalent. It supports the Asix Electronics PHY
121 found in the X-Surf 100 AX88796B package.
133 tristate "Broadcom BCM54140 PHY"
137 Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY.
139 This driver also supports the hardware monitoring of this PHY and
143 tristate "Broadcom 63xx SOCs internal PHY"
157 tristate "Broadcom BCM84881 PHY"
159 Support the Broadcom BCM84881 PHY.
167 tristate "Broadcom Cygnus/Omega SoC internal PHY"
172 This PHY driver is for the 1G internal PHYs of the Broadcom
175 Currently supports internal PHY's used in the BCM11300,
191 tristate "Cortina EDC CDR 10G Ethernet PHY"
193 Currently supports the CS4340 phy.
215 PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
219 tristate "LSI ET1011C PHY"
221 Supports the LSI ET1011C PHY.
234 tristate "Marvell 88Q2XXX PHY"
236 Support for the Marvell 88Q2XXX 100/1000BASE-T1 Automotive Ethernet
240 tristate "Marvell 88X2222 PHY"
242 Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet
263 Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
265 Include support for built-in Ethernet PHYs which are present in
268 (common-mode voltage) during startup.
277 tristate "Microchip 10BASE-T1S Ethernet PHYs"
309 Currently supports the DP83865 PHY.
312 tristate "NXP 100BASE-TX PHYs"
314 Support the 100BASE-TX PHY integrated on the SJA1110 automotive
329 Currently supports the NXP TJA1100 and TJA1101 PHY.
332 tristate "Onsemi 10BASE-T1S Ethernet PHY"
334 Adds support for the onsemi 10BASE-T1S Ethernet PHY.
335 Currently supports the NCN26000 10BASE-T1S Industrial PHY
343 QCA8337(Internal qca8k PHY) model
353 Supports the Realtek 821x PHY.
363 Currently supports the integrated Ethernet PHY.
374 This is the driver for the STe100p and STe101p PHYs.
388 tristate "Texas Instruments DP83TC811 PHY"
390 Supports the DP83TC811 PHY.
393 tristate "Texas Instruments DP83848 PHY"
395 Supports the DP83848 PHY.
398 tristate "Texas Instruments DP83867 Gigabit PHY"
400 Currently supports the DP83867 PHY.
403 tristate "Texas Instruments DP83869 Gigabit PHY"
405 Currently supports the DP83869 PHY. This PHY supports copper and
409 tristate "Texas Instruments DP83TD510 Ethernet 10Base-T1L PHY"
411 Support for the DP83TD510 Ethernet 10Base-T1L PHY. This PHY supports
415 tristate "Texas Instruments DP83TG720 Ethernet 1000Base-T1 PHY"
417 The DP83TG720S-Q1 is an automotive Ethernet physical layer
421 shielded single twisted-pair cables. This device offers
424 requiring high-speed data transmission in automotive
442 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"