Lines Matching full:calculated
91 * calculated. Setting the changeV1 bit or the changeV2 bit will
163 * calculated to zero. CRC is short for cyclic redundancy code. It is
170 * have calculated to zero. The first is that all the calibration data
354 * will not saturate prematurely. These values are calculated
355 * whenever a new coordinate transformation is calculated. It is
468 * Rate_data is the calculated rate data. It is a first derivative
469 * calculation. It is calculated at a frequency specified by the
471 * calculated is specified by the variable rate_address (pg. 12).
516 * Rate_divisor is how often the rate is calculated. If rate_divisor
517 * is 1, the rates are calculated at full sensor bandwidth. If
518 * rate_divisor is 200, rates are calculated every 200 samples.
522 * rate_divisor, at which point the rates are calculated, and
552 * every time the matching filters are calculated. Filter1 is
553 * calculated at the sensor data bandwidth. So this counter would
611 * Last_crc is the value that shows the actual calculated CRC. CRC