dts/qcom/msm8939-longcheer-l9100.dts

1 // SPDX-License-Identifier: GPL-2.0-only
3 /dts-v1/;
5 #include "msm8939-pm8916.dtsi"
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
12 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
16 	compatible = "longcheer,l9100", "qcom,msm8939";
17 	chassis-type = "handset";
26 		stdout-path = "serial0";
29 	gpio-hall-sensor {
30 		compatible = "gpio-keys";
32 		pinctrl-0 = <&gpio_hall_sensor_default>;
33 		pinctrl-names = "default";
35 		label = "GPIO Hall Effect Sensor";
37 		event-hall-sensor {
40 			linux,input-type = <EV_SW>;
42 			linux,can-disable;
46 	gpio-keys {
47 		compatible = "gpio-keys";
49 		pinctrl-0 = <&gpio_keys_default>;
50 		pinctrl-names = "default";
52 		label = "GPIO Buttons";
54 		button-volume-up {
62 		compatible = "gpio-leds";
64 		led-0 {
67 			default-state = "off";
70 			pinctrl-0 = <&button_backlight_default>;
71 			pinctrl-names = "default";
75 	reg_ts_vdd: regulator-vdd-ts {
76 		compatible = "regulator-fixed";
77 		regulator-name = "regulator-vdd-ts";
78 		regulator-min-microvolt = <2850000>;
79 		regulator-max-microvolt = <2850000>;
81 		gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>;
82 		enable-active-high;
84 		pinctrl-0 = <&ts_vdd_default>;
85 		pinctrl-names = "default";
89 		compatible = "pwm-backlight";
91 		brightness-levels = <0 255>;
92 		num-interpolated-steps = <255>;
93 		default-brightness-level = <128>;
94 		enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
96 		pinctrl-0 = <&lcd_bl_en_default>;
97 		pinctrl-names = "default";
100 	flash-led-controller {
102 		flash-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
103 		enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
105 		pinctrl-0 = <&camera_front_flash_default>;
106 		pinctrl-names = "default";
111 			flash-max-timeout-us = <250000>;
115 	usb_id: usb-id {
116 		compatible = "linux,extcon-usb-gpio";
117 		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
118 		pinctrl-0 = <&usb_id_default &usb_id_switch_default>;
119 		pinctrl-names = "default";
127 	led-controller@30 {
130 		#address-cells = <1>;
131 		#size-cells = <0>;
133 		vin-supply = <&pm8916_l17>;
134 		vio-supply = <&pm8916_l6>;
136 		pinctrl-0 = <&status_led_default>;
137 		pinctrl-names = "default";
139 		multi-led {
143 			#address-cells = <1>;
144 			#size-cells = <0>;
168 		compatible = "asahi-kasei,ak09911";
171 		vdd-supply = <&pm8916_l17>;
172 		vid-supply = <&pm8916_l6>;
174 		reset-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
176 		pinctrl-0 = <&mag_reset_default>;
177 		pinctrl-names = "default";
180 	light-sensor@23 {
183 		proximity-near-level = <75>;
185 		vdd-supply = <&pm8916_l17>;
186 		vddio-supply = <&pm8916_l5>;
188 		interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>;
190 		pinctrl-0 = <&light_int_default>;
191 		pinctrl-names = "default";
198 		vdd-supply = <&pm8916_l17>;
199 		vddio-supply = <&pm8916_l6>;
210 		interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
212 		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
214 		vdda-supply = <&pm8916_l6>;
215 		vdd-supply = <&reg_ts_vdd>;
217 		pinctrl-0 = <&ts_int_reset_default>;
218 		pinctrl-names = "default";
230 	status_led_default: status-led-default-state {
233 		power-source = <PM8916_GPIO_VPH>;
234 		bias-disable;
235 		output-high;
240 	pwm_out: mpp4-state {
243 		power-source = <PM8916_MPP_VPH>;
244 		output-low;
245 		qcom,dtest = <1>;
250 	pinctrl-0 = <&pwm_out>;
251 	pinctrl-names = "default";
262 		regulator-min-microvolt = <2850000>;
263 		regulator-max-microvolt = <2850000>;
276 	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
277 	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
278 	pinctrl-names = "default", "sleep";
280 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
299 	compatible = "qcom,wcn3620";
307 	button_backlight_default: button-backlight-default-state {
309 		function = "gpio";
310 		drive-strength = <2>;
311 		bias-disable;
314 	camera_front_flash_default: camera-front-flash-default-state {
316 		function = "gpio";
317 		drive-strength = <2>;
318 		bias-disable;
321 	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
323 		function = "gpio";
324 		drive-strength = <2>;
325 		bias-disable;
328 	gpio_keys_default: gpio-keys-default-state {
330 		function = "gpio";
331 		drive-strength = <2>;
332 		bias-pull-up;
335 	lcd_bl_en_default: lcd-bl-en-default-state {
337 		function = "gpio";
338 		drive-strength = <2>;
339 		bias-disable;
342 	light_int_default: light-int-default-state {
344 		function = "gpio";
345 		drive-strength = <2>;
346 		bias-disable;
349 	mag_reset_default: mag-reset-default-state {
351 		function = "gpio";
352 		drive-strength = <2>;
353 		bias-disable;
356 	sdc2_cd_default: sdc2-cd-default-state {
358 		function = "gpio";
359 		drive-strength = <2>;
360 		bias-disable;
363 	ts_int_reset_default: ts-int-reset-default-state {
365 		function = "gpio";
366 		drive-strength = <2>;
367 		bias-disable;
370 	ts_vdd_default: ts-vdd-default-state {
372 		function = "gpio";
373 		drive-strength = <2>;
374 		bias-disable;
377 	usb_id_default: usb-id-default-state {
379 		function = "gpio";
380 		drive-strength = <8>;
381 		bias-pull-up;
384 	usb_id_switch_default: usb-id-switch-default-state {
386 		function = "gpio";
387 		drive-strength = <2>;
388 		output-high;