dts/allwinner/sun50i-h618-transpeed-8k618-t.dts

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "sun50i-h616.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
14 	model = "Transpeed 8K618-T";
15 	compatible = "transpeed,8k618-t", "allwinner,sun50i-h618";
22 		stdout-path = "serial0:115200n8";
27 		compatible = "regulator-fixed";
28 		regulator-name = "vcc-5v";
29 		regulator-min-microvolt = <5000000>;
30 		regulator-max-microvolt = <5000000>;
31 		regulator-always-on;
36 		compatible = "regulator-fixed";
37 		regulator-name = "vcc-3v3";
38 		regulator-min-microvolt = <3300000>;
39 		regulator-max-microvolt = <3300000>;
40 		regulator-always-on;
57 	vmmc-supply = <&reg_dldo1>;
58 	cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>;	/* PI16 */
59 	bus-width = <4>;
64 	vmmc-supply = <&reg_dldo1>;
65 	vqmmc-supply = <&reg_aldo1>;
66 	bus-width = <8>;
67 	non-removable;
68 	cap-mmc-hw-reset;
69 	mmc-ddr-1_8v;
70 	mmc-hs200-1_8v;
86 		compatible = "x-powers,axp313a";
88 		#interrupt-cells = <1>;
89 		interrupt-controller;
91 		vin1-supply = <&reg_vcc5v>;
92 		vin2-supply = <&reg_vcc5v>;
93 		vin3-supply = <&reg_vcc5v>;
97 				regulator-always-on;
98 				regulator-min-microvolt = <1800000>;
99 				regulator-max-microvolt = <1800000>;
100 				regulator-name = "vcc-1v8-pll";
104 				regulator-always-on;
105 				regulator-min-microvolt = <3300000>;
106 				regulator-max-microvolt = <3300000>;
107 				regulator-name = "vcc-3v3-io-mmc";
111 				regulator-always-on;
112 				regulator-min-microvolt = <810000>;
113 				regulator-max-microvolt = <990000>;
114 				regulator-name = "vdd-gpu-sys";
118 				regulator-always-on;
119 				regulator-min-microvolt = <810000>;
120 				regulator-max-microvolt = <1100000>;
121 				regulator-name = "vdd-cpu";
125 				regulator-always-on;
126 				regulator-min-microvolt = <1360000>;
127 				regulator-max-microvolt = <1360000>;
128 				regulator-name = "vdd-dram";
135 	vcc-pc-supply = <&reg_aldo1>;
136 	vcc-pg-supply = <&reg_dldo1>;
137 	vcc-ph-supply = <&reg_dldo1>;
138 	vcc-pi-supply = <&reg_dldo1>;
142 	pinctrl-names = "default";
143 	pinctrl-0 = <&uart0_ph_pins>;
148 	pinctrl-names = "default";
149 	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
150 	uart-has-rtscts;