ti/omap/omap3-evm-processor-common.dtsi

8 		reg = <0x80000000 0x10000000>; /* 256 MB */
12 		pinctrl-names = "default";
13 		pinctrl-0 = <&wl12xx_gpio>;
18 	vdds_dsi-supply = <&vpll2>;
19 	vdda_video-supply = <&lcd_3v3>;
20 	pinctrl-names = "default";
21 	pinctrl-0 = <
28 	pinctrl-names = "default";
29 	pinctrl-0 = <&ehci_phy_pins>;
33 	pinctrl-names = "default";
34 	pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>;
36 	dss_dpi_pins1: dss-dpi2-pins {
37 		pinctrl-single,pins = <
65 	mmc1_pins: mmc1-pins {
66 		pinctrl-single,pins = <
81 	mmc2_pins: mmc2-pins {
82 		pinctrl-single,pins = <
96 	uart3_pins: uart3-pins {
97 		pinctrl-single,pins = <
103 	/* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */
104 	on_board_gpio_61: ehci-port-select-pins {
105 		pinctrl-single,pins = <
111 	hsusb2_pins: hsusb2-pins {
112 		pinctrl-single,pins = <
138 	wl12xx_gpio: wl12xx-gpio-pins {
139 		pinctrl-single,pins = <
145 	smsc911x_pins: smsc911x-pins {
146 		pinctrl-single,pins = <
153 	dss_dpi_pins2: dss-dpi1-pins {
154 		pinctrl-single,pins = <
166 	pinctrl-names = "default";
167 	pinctrl-0 = <&mmc1_pins>;
171 	pinctrl-names = "default";
172 	pinctrl-0 = <&mmc2_pins>;
180 	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
184 	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
188 	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
189 	pinctrl-names = "default";
190 	pinctrl-0 = <&uart3_pins>;
194  * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface
195  * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
198 	en-usb2-port-hog {
199 		gpio-hog;
201 		output-low;
202 		line-name = "enable usb2 port";
206 /* T2_GPIO_2 low to route GPIO_61 to on-board devices */
209 		gpio-hog;
211 		output-low;
212 		line-name = "en_hsusb2_clk";
221 		pinctrl-names = "default";
222 		pinctrl-0 = <&smsc911x_pins>;