dts/st/stm32mp13-pinctrl.dtsi

1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
3  * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
6 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
9 	adc1_usb_cc_pins_a: adc1-usb-cc-pins-0 {
12 				 <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1 in12 */
16 	i2c1_pins_a: i2c1-0 {
19 				 <STM32_PINMUX('E', 8, AF5)>; /* I2C1_SDA */
20 			bias-disable;
21 			drive-open-drain;
22 			slew-rate = <0>;
26 	i2c1_sleep_pins_a: i2c1-sleep-0 {
29 				 <STM32_PINMUX('E', 8, ANALOG)>; /* I2C1_SDA */
33 	i2c5_pins_a: i2c5-0 {
37 			bias-disable;
38 			drive-open-drain;
39 			slew-rate = <0>;
43 	i2c5_sleep_pins_a: i2c5-sleep-0 {
50 	mcp23017_pins_a: mcp23017-0 {
53 			bias-pull-up;
57 	pwm3_pins_a: pwm3-0 {
60 			bias-pull-down;
61 			drive-push-pull;
62 			slew-rate = <0>;
66 	pwm3_sleep_pins_a: pwm3-sleep-0 {
72 	pwm4_pins_a: pwm4-0 {
75 			bias-pull-down;
76 			drive-push-pull;
77 			slew-rate = <0>;
81 	pwm4_sleep_pins_a: pwm4-sleep-0 {
87 	pwm8_pins_a: pwm8-0 {
89 			pinmux = <STM32_PINMUX('E', 5, AF3)>; /* TIM8_CH3 */
90 			bias-pull-down;
91 			drive-push-pull;
92 			slew-rate = <0>;
96 	pwm8_sleep_pins_a: pwm8-sleep-0 {
98 			pinmux = <STM32_PINMUX('E', 5, ANALOG)>; /* TIM8_CH3 */
102 	pwm14_pins_a: pwm14-0 {
104 			pinmux = <STM32_PINMUX('F', 9, AF9)>; /* TIM14_CH1 */
105 			bias-pull-down;
106 			drive-push-pull;
107 			slew-rate = <0>;
111 	pwm14_sleep_pins_a: pwm14-sleep-0 {
113 			pinmux = <STM32_PINMUX('F', 9, ANALOG)>; /* TIM14_CH1 */
117 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
120 				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
124 			slew-rate = <1>;
125 			drive-push-pull;
126 			bias-disable;
130 	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
133 				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
136 			slew-rate = <1>;
137 			drive-push-pull;
138 			bias-disable;
142 			slew-rate = <1>;
143 			drive-open-drain;
144 			bias-disable;
148 	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
151 				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
159 	sdmmc1_clk_pins_a: sdmmc1-clk-0 {
162 			slew-rate = <1>;
163 			drive-push-pull;
164 			bias-disable;
168 	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
175 			slew-rate = <1>;
176 			drive-push-pull;
177 			bias-pull-up;
181 	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
187 			slew-rate = <1>;
188 			drive-push-pull;
189 			bias-pull-up;
193 			slew-rate = <1>;
194 			drive-open-drain;
195 			bias-pull-up;
199 	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
205 				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
210 	sdmmc2_clk_pins_a: sdmmc2-clk-0 {
212 			pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
213 			slew-rate = <1>;
214 			drive-push-pull;
215 			bias-pull-up;
219 	spi5_pins_a: spi5-0 {
223 			bias-disable;
224 			drive-push-pull;
225 			slew-rate = <1>;
229 			pinmux = <STM32_PINMUX('A', 8, AF5)>; /* SPI5_MISO */
230 			bias-disable;
234 	spi5_sleep_pins_a: spi5-sleep-0 {
237 				 <STM32_PINMUX('A', 8, ANALOG)>, /* SPI5_MISO */
242 	stm32g0_intn_pins_a: stm32g0-intn-0 {
245 			bias-pull-up;
249 	uart4_pins_a: uart4-0 {
252 			bias-disable;
253 			drive-push-pull;
254 			slew-rate = <0>;
258 			bias-disable;
262 	uart4_idle_pins_a: uart4-idle-0 {
268 			bias-disable;
272 	uart4_sleep_pins_a: uart4-sleep-0 {
279 	uart8_pins_a: uart8-0 {
281 			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
282 			bias-disable;
283 			drive-push-pull;
284 			slew-rate = <0>;
287 			pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
288 			bias-pull-up;
292 	uart8_idle_pins_a: uart8-idle-0 {
294 			pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */
297 			pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
298 			bias-pull-up;
302 	uart8_sleep_pins_a: uart8-sleep-0 {
304 			pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */
305 				 <STM32_PINMUX('F', 9, ANALOG)>; /* UART8_RX */
309 	usart1_pins_a: usart1-0 {
311 			pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */
313 			bias-disable;
314 			drive-push-pull;
315 			slew-rate = <0>;
318 			pinmux = <STM32_PINMUX('B', 0, AF4)>, /* USART1_RX */
319 				 <STM32_PINMUX('A', 7, AF7)>; /* USART1_CTS_NSS */
320 			bias-pull-up;
324 	usart1_idle_pins_a: usart1-idle-0 {
326 			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
327 				 <STM32_PINMUX('A', 7, ANALOG)>; /* USART1_CTS_NSS */
331 			bias-disable;
332 			drive-push-pull;
333 			slew-rate = <0>;
336 			pinmux = <STM32_PINMUX('B', 0, AF4)>; /* USART1_RX */
337 			bias-pull-up;
341 	usart1_sleep_pins_a: usart1-sleep-0 {
343 			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
345 				 <STM32_PINMUX('A', 7, ANALOG)>, /* USART1_CTS_NSS */
346 				 <STM32_PINMUX('B', 0, ANALOG)>; /* USART1_RX */
350 	usart2_pins_a: usart2-0 {
354 			bias-disable;
355 			drive-push-pull;
356 			slew-rate = <0>;
360 				 <STM32_PINMUX('E', 11, AF2)>; /* USART2_CTS_NSS */
361 			bias-disable;
365 	usart2_idle_pins_a: usart2-idle-0 {
368 				 <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */
372 			bias-disable;
373 			drive-push-pull;
374 			slew-rate = <0>;
378 			bias-disable;
382 	usart2_sleep_pins_a: usart2-sleep-0 {
387 				 <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */