Lines Matching +full:reset +full:- +full:phy +full:- +full:on +full:- +full:wake

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
14 stdout-path = "serial2:1500000n8";
17 vcc5v0_sys: regulator-vcc5v0-sys {
18 compatible = "regulator-fixed";
19 regulator-name = "vcc5v0_sys";
20 regulator-always-on;
21 regulator-boot-on;
22 regulator-min-microvolt = <5000000>;
23 regulator-max-microvolt = <5000000>;
26 sdio_pwrseq: pwrseq-sdio {
27 compatible = "mmc-pwrseq-simple";
29 clock-names = "ext_clock";
30 pinctrl-names = "default";
31 pinctrl-0 = <&wifi_enable_h>;
32 reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
37 bus-width = <8>;
38 cap-mmc-highspeed;
39 mmc-hs200-1_8v;
40 non-removable;
41 pinctrl-names = "default";
42 pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
43 rockchip,default-sample-phase = <90>;
44 vmmc-supply = <&vcc_3v3>;
45 vqmmc-supply = <&vcc_1v8>;
50 clock-frequency = <400000>;
56 interrupt-parent = <&gpio0>;
58 #clock-cells = <1>;
59 clock-output-names = "rk808-clkout1", "rk808-clkout2";
60 pinctrl-names = "default";
61 pinctrl-0 = <&pmic_int_l>;
62 rockchip,system-power-controller;
63 wakeup-source;
65 vcc1-supply = <&vcc5v0_sys>;
66 vcc2-supply = <&vcc5v0_sys>;
67 vcc3-supply = <&vcc5v0_sys>;
68 vcc4-supply = <&vcc5v0_sys>;
69 vcc5-supply = <&vcc_buck5>;
70 vcc6-supply = <&vcc_buck5>;
71 vcc7-supply = <&vcc5v0_sys>;
72 vcc8-supply = <&vcc3v3_sys>;
73 vcc9-supply = <&vcc5v0_sys>;
77 regulator-name = "vdd_npu_vepu";
78 regulator-always-on;
79 regulator-boot-on;
80 regulator-initial-mode = <0x2>;
81 regulator-min-microvolt = <650000>;
82 regulator-max-microvolt = <950000>;
83 regulator-ramp-delay = <6001>;
84 regulator-state-mem {
85 regulator-off-in-suspend;
90 regulator-name = "vdd_arm";
91 regulator-always-on;
92 regulator-boot-on;
93 regulator-initial-mode = <0x2>;
94 regulator-min-microvolt = <725000>;
95 regulator-max-microvolt = <1350000>;
96 regulator-ramp-delay = <6001>;
97 regulator-state-mem {
98 regulator-off-in-suspend;
103 regulator-name = "vcc_ddr";
104 regulator-always-on;
105 regulator-boot-on;
106 regulator-initial-mode = <0x2>;
107 regulator-state-mem {
108 regulator-on-in-suspend;
113 regulator-name = "vcc3v3_sys";
114 regulator-always-on;
115 regulator-boot-on;
116 regulator-initial-mode = <0x2>;
117 regulator-min-microvolt = <3300000>;
118 regulator-max-microvolt = <3300000>;
119 regulator-state-mem {
120 regulator-on-in-suspend;
121 regulator-suspend-microvolt = <3300000>;
126 regulator-name = "vcc_buck5";
127 regulator-always-on;
128 regulator-boot-on;
129 regulator-min-microvolt = <2200000>;
130 regulator-max-microvolt = <2200000>;
131 regulator-state-mem {
132 regulator-on-in-suspend;
133 regulator-suspend-microvolt = <2200000>;
138 regulator-name = "vcc_0v8";
139 regulator-always-on;
140 regulator-boot-on;
141 regulator-min-microvolt = <800000>;
142 regulator-max-microvolt = <800000>;
143 regulator-state-mem {
144 regulator-off-in-suspend;
149 regulator-name = "vcc1v8_pmu";
150 regulator-always-on;
151 regulator-boot-on;
152 regulator-min-microvolt = <1800000>;
153 regulator-max-microvolt = <1800000>;
154 regulator-state-mem {
155 regulator-on-in-suspend;
156 regulator-suspend-microvolt = <1800000>;
161 regulator-name = "vcc0v8_pmu";
162 regulator-always-on;
163 regulator-boot-on;
164 regulator-min-microvolt = <800000>;
165 regulator-max-microvolt = <800000>;
166 regulator-state-mem {
167 regulator-on-in-suspend;
168 regulator-suspend-microvolt = <800000>;
173 regulator-name = "vcc_1v8";
174 regulator-always-on;
175 regulator-boot-on;
176 regulator-min-microvolt = <1800000>;
177 regulator-max-microvolt = <1800000>;
178 regulator-state-mem {
179 regulator-on-in-suspend;
180 regulator-suspend-microvolt = <1800000>;
185 regulator-name = "vcc_dovdd";
186 regulator-always-on;
187 regulator-boot-on;
188 regulator-min-microvolt = <1800000>;
189 regulator-max-microvolt = <1800000>;
190 regulator-state-mem {
191 regulator-off-in-suspend;
196 regulator-name = "vcc_dvdd";
197 regulator-min-microvolt = <1200000>;
198 regulator-max-microvolt = <1200000>;
199 regulator-state-mem {
200 regulator-off-in-suspend;
205 regulator-name = "vcc_avdd";
206 regulator-min-microvolt = <2800000>;
207 regulator-max-microvolt = <2800000>;
208 regulator-state-mem {
209 regulator-off-in-suspend;
214 regulator-name = "vccio_sd";
215 regulator-always-on;
216 regulator-boot-on;
217 regulator-min-microvolt = <1800000>;
218 regulator-max-microvolt = <3300000>;
219 regulator-state-mem {
220 regulator-off-in-suspend;
225 regulator-name = "vcc3v3_sd";
226 regulator-always-on;
227 regulator-boot-on;
228 regulator-min-microvolt = <3300000>;
229 regulator-max-microvolt = <3300000>;
230 regulator-state-mem {
231 regulator-off-in-suspend;
236 regulator-name = "vcc_5v0";
240 regulator-name = "vcc_3v3";
241 regulator-always-on;
242 regulator-boot-on;
250 clock-frequency = <400000>;
255 #clock-cells = <0>;
256 interrupt-parent = <&gpio0>;
258 clock-output-names = "xin32k";
263 assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>,
265 assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>,
267 assigned-clock-rates = <0>, <50000000>;
269 phy-handle = <&phy>;
270 phy-mode = "rmii";
271 phy-supply = <&vcc_3v3>;
272 pinctrl-names = "default";
273 pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>;
278 phy: ethernet-phy@0 { label
279 compatible = "ethernet-phy-ieee802.3-c22";
281 pinctrl-names = "default";
282 pinctrl-0 = <&eth_phy_rst>;
283 reset-active-low;
284 reset-assert-us = <50000>;
285 reset-deassert-us = <10000>;
286 reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
292 eth_phy_rst: eth-phy-rst {
297 bt_enable: bt-enable {
301 bt_wake_dev: bt-wake-dev {
305 bt_wake_host: bt-wake-host {
311 pmic_int_l: pmic-int-l {
317 wifi_enable_h: wifi-enable-h {
324 pmuio0-supply = <&vcc1v8_pmu>;
325 pmuio1-supply = <&vcc3v3_sys>;
326 vccio1-supply = <&vcc_1v8>;
327 vccio2-supply = <&vccio_sd>;
328 vccio3-supply = <&vcc_1v8>;
329 vccio4-supply = <&vcc_dovdd>;
330 vccio5-supply = <&vcc_1v8>;
331 vccio6-supply = <&vcc_1v8>;
332 vccio7-supply = <&vcc_dovdd>;
337 vref-supply = <&vcc_1v8>;
342 bus-width = <4>;
343 cap-sd-highspeed;
344 cap-sdio-irq;
345 keep-power-in-suspend;
346 max-frequency = <100000000>;
347 mmc-pwrseq = <&sdio_pwrseq>;
348 non-removable;
349 pinctrl-names = "default";
350 pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
351 rockchip,default-sample-phase = <90>;
352 sd-uhs-sdr104;
353 vmmc-supply = <&vcc3v3_sys>;
354 vqmmc-supply = <&vcc_1v8>;
359 bus-width = <4>;
360 cap-mmc-highspeed;
361 cap-sd-highspeed;
362 card-detect-delay = <200>;
363 pinctrl-names = "default";
364 pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
365 rockchip,default-sample-phase = <90>;
366 sd-uhs-sdr12;
367 sd-uhs-sdr25;
368 sd-uhs-sdr104;
369 vqmmc-supply = <&vccio_sd>;
374 pinctrl-names = "default";
375 pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
376 uart-has-rtscts;
380 compatible = "realtek,rtl8723ds-bt";
381 device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */
382 enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */
383 host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */
384 max-speed = <2000000>;
385 pinctrl-names = "default";
386 pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>;
395 pinctrl-names = "default";
396 pinctrl-0 = <&uart3m2_xfer>;
401 pinctrl-names = "default";
402 pinctrl-0 = <&uart4m2_xfer>;