Lines Matching +full:current +full:- +full:boost +full:- +full:limit
1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-msm8974pro.dtsi"
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/leds/common.h>
7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
11 compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
12 chassis-type = "tablet";
20 stdout-path = "serial0:115200n8";
23 gpio-keys {
24 compatible = "gpio-keys";
26 pinctrl-names = "default";
27 pinctrl-0 = <&gpio_keys_pin_a>;
29 key-volume-down {
32 linux,input-type = <1>;
36 key-camera-snapshot {
39 linux,input-type = <1>;
43 key-camera-focus {
46 linux,input-type = <1>;
50 key-volume-up {
53 linux,input-type = <1>;
58 vreg_bl_vddio: lcd-backlight-vddio {
59 compatible = "regulator-fixed";
60 regulator-name = "vreg_bl_vddio";
61 regulator-min-microvolt = <3150000>;
62 regulator-max-microvolt = <3150000>;
65 enable-active-high;
67 vin-supply = <&pm8941_s3>;
68 startup-delay-us = <70000>;
70 pinctrl-names = "default";
71 pinctrl-0 = <&lcd_backlight_en_pin_a>;
74 vreg_vsp: lcd-dcdc-regulator {
75 compatible = "regulator-fixed";
76 regulator-name = "vreg_vsp";
77 regulator-min-microvolt = <5600000>;
78 regulator-max-microvolt = <5600000>;
81 enable-active-high;
83 pinctrl-names = "default";
84 pinctrl-0 = <&lcd_dcdc_en_pin_a>;
87 vreg_boost: vreg-boost {
88 compatible = "regulator-fixed";
90 regulator-name = "vreg-boost";
91 regulator-min-microvolt = <3150000>;
92 regulator-max-microvolt = <3150000>;
94 regulator-always-on;
95 regulator-boot-on;
98 enable-active-high;
100 pinctrl-names = "default";
101 pinctrl-0 = <&boost_bypass_n_pin>;
104 vreg_vph_pwr: vreg-vph-pwr {
105 compatible = "regulator-fixed";
106 regulator-name = "vph-pwr";
108 regulator-min-microvolt = <3600000>;
109 regulator-max-microvolt = <3600000>;
111 regulator-always-on;
114 vreg_wlan: wlan-regulator {
115 compatible = "regulator-fixed";
117 regulator-name = "wl-reg";
118 regulator-min-microvolt = <3300000>;
119 regulator-max-microvolt = <3300000>;
122 enable-active-high;
124 pinctrl-names = "default";
125 pinctrl-0 = <&wlan_regulator_pin>;
135 clock-frequency = <355000>;
138 compatible = "syna,rmi4-i2c";
141 interrupt-parent = <&tlmm>;
144 #address-cells = <1>;
145 #size-cells = <0>;
147 vdd-supply = <&pm8941_l22>;
148 vio-supply = <&pm8941_lvs3>;
150 pinctrl-names = "default";
151 pinctrl-0 = <&ts_int_pin>;
153 syna,startup-delay-ms = <100>;
155 rmi4-f01@1 {
157 syna,nosleep-mode = <1>;
160 rmi4-f11@11 {
162 syna,sensor-type = <1>;
163 touchscreen-inverted-x;
170 clock-frequency = <355000>;
175 power-supply = <&vreg_bl_vddio>;
177 bl-name = "backlight";
178 dev-ctrl = /bits/ 8 <0x05>;
179 init-brt = /bits/ 8 <0x3f>;
181 rom-a0h {
182 rom-addr = /bits/ 8 <0xa0>;
183 rom-val = /bits/ 8 <0xff>;
185 rom-a1h {
186 rom-addr = /bits/ 8 <0xa1>;
187 rom-val = /bits/ 8 <0x3f>;
189 rom-a2h {
190 rom-addr = /bits/ 8 <0xa2>;
191 rom-val = /bits/ 8 <0x20>;
193 rom-a3h {
194 rom-addr = /bits/ 8 <0xa3>;
195 rom-val = /bits/ 8 <0x5e>;
197 rom-a4h {
198 rom-addr = /bits/ 8 <0xa4>;
199 rom-val = /bits/ 8 <0x02>;
201 rom-a5h {
202 rom-addr = /bits/ 8 <0xa5>;
203 rom-val = /bits/ 8 <0x04>;
205 rom-a6h {
206 rom-addr = /bits/ 8 <0xa6>;
207 rom-val = /bits/ 8 <0x80>;
209 rom-a7h {
210 rom-addr = /bits/ 8 <0xa7>;
211 rom-val = /bits/ 8 <0xf7>;
213 rom-a9h {
214 rom-addr = /bits/ 8 <0xa9>;
215 rom-val = /bits/ 8 <0x80>;
217 rom-aah {
218 rom-addr = /bits/ 8 <0xaa>;
219 rom-val = /bits/ 8 <0x0f>;
221 rom-aeh {
222 rom-addr = /bits/ 8 <0xae>;
223 rom-val = /bits/ 8 <0x0f>;
232 compatible = "brcm,bcm43438-bt";
233 max-speed = <3000000>;
235 pinctrl-names = "default";
236 pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
238 host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
239 device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
240 shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
247 qcom,rset-ohms = <2100>;
248 qcom,vset-millivolts = <3000>;
252 gpio_keys_pin_a: gpio-keys-active-state {
256 bias-pull-up;
257 power-source = <PM8941_GPIO_S3>;
260 bt_reg_on_pin: bt-reg-on-state {
264 output-low;
265 power-source = <PM8941_GPIO_S3>;
268 wlan_sleep_clk_pin: wl-sleep-clk-state {
272 output-high;
273 power-source = <PM8941_GPIO_S3>;
276 wlan_regulator_pin: wl-reg-active-state {
280 bias-disable;
281 power-source = <PM8941_GPIO_S3>;
284 lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
288 bias-disable;
289 power-source = <PM8941_GPIO_S3>;
290 input-disable;
291 output-low;
299 qcom,power-source = <1>;
301 multi-led {
305 #address-cells = <1>;
306 #size-cells = <0>;
326 cx-supply = <&pm8841_s2>;
331 cx-supply = <&pm8841_s2>;
332 mss-supply = <&pm8841_s3>;
333 mx-supply = <&pm8841_s1>;
334 pll-supply = <&pm8941_l12>;
339 regulators-0 {
340 compatible = "qcom,rpm-pm8841-regulators";
343 regulator-min-microvolt = <675000>;
344 regulator-max-microvolt = <1050000>;
348 regulator-min-microvolt = <500000>;
349 regulator-max-microvolt = <1050000>;
353 regulator-min-microvolt = <500000>;
354 regulator-max-microvolt = <1050000>;
358 regulator-min-microvolt = <500000>;
359 regulator-max-microvolt = <1050000>;
363 regulators-1 {
364 compatible = "qcom,rpm-pm8941-regulators";
366 vdd_l1_l3-supply = <&pm8941_s1>;
367 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
368 vdd_l4_l11-supply = <&pm8941_s1>;
369 vdd_l5_l7-supply = <&pm8941_s2>;
370 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
371 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
372 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
373 vdd_l21-supply = <&vreg_boost>;
376 regulator-min-microvolt = <1300000>;
377 regulator-max-microvolt = <1300000>;
378 regulator-always-on;
379 regulator-boot-on;
383 regulator-min-microvolt = <2150000>;
384 regulator-max-microvolt = <2150000>;
385 regulator-boot-on;
389 regulator-min-microvolt = <1800000>;
390 regulator-max-microvolt = <1800000>;
391 regulator-system-load = <154000>;
392 regulator-always-on;
393 regulator-boot-on;
397 regulator-min-microvolt = <5000000>;
398 regulator-max-microvolt = <5000000>;
402 regulator-min-microvolt = <1225000>;
403 regulator-max-microvolt = <1225000>;
404 regulator-always-on;
405 regulator-boot-on;
409 regulator-min-microvolt = <1200000>;
410 regulator-max-microvolt = <1200000>;
414 regulator-min-microvolt = <1200000>;
415 regulator-max-microvolt = <1200000>;
419 regulator-min-microvolt = <1225000>;
420 regulator-max-microvolt = <1225000>;
424 regulator-min-microvolt = <1800000>;
425 regulator-max-microvolt = <1800000>;
429 regulator-min-microvolt = <1800000>;
430 regulator-max-microvolt = <1800000>;
431 regulator-boot-on;
435 regulator-min-microvolt = <1800000>;
436 regulator-max-microvolt = <1800000>;
437 regulator-boot-on;
441 regulator-min-microvolt = <1800000>;
442 regulator-max-microvolt = <1800000>;
446 regulator-min-microvolt = <1800000>;
447 regulator-max-microvolt = <2950000>;
451 regulator-min-microvolt = <1300000>;
452 regulator-max-microvolt = <1350000>;
456 regulator-min-microvolt = <1800000>;
457 regulator-max-microvolt = <1800000>;
458 regulator-always-on;
459 regulator-boot-on;
463 regulator-min-microvolt = <1800000>;
464 regulator-max-microvolt = <2950000>;
465 regulator-boot-on;
469 regulator-min-microvolt = <1800000>;
470 regulator-max-microvolt = <1800000>;
474 regulator-min-microvolt = <2050000>;
475 regulator-max-microvolt = <2050000>;
479 regulator-min-microvolt = <2700000>;
480 regulator-max-microvolt = <2700000>;
484 regulator-min-microvolt = <2700000>;
485 regulator-max-microvolt = <2700000>;
489 regulator-min-microvolt = <2850000>;
490 regulator-max-microvolt = <2850000>;
494 regulator-min-microvolt = <2850000>;
495 regulator-max-microvolt = <2850000>;
499 regulator-min-microvolt = <2950000>;
500 regulator-max-microvolt = <2950000>;
501 regulator-system-load = <500000>;
502 regulator-allow-set-load;
503 regulator-boot-on;
507 regulator-min-microvolt = <2950000>;
508 regulator-max-microvolt = <2950000>;
509 regulator-boot-on;
513 regulator-min-microvolt = <3000000>;
514 regulator-max-microvolt = <3000000>;
518 regulator-min-microvolt = <2800000>;
519 regulator-max-microvolt = <2800000>;
523 regulator-min-microvolt = <3075000>;
524 regulator-max-microvolt = <3075000>;
525 regulator-boot-on;
535 vmmc-supply = <&pm8941_l20>;
536 vqmmc-supply = <&pm8941_s3>;
538 pinctrl-names = "default", "sleep";
539 pinctrl-0 = <&sdc1_on>;
540 pinctrl-1 = <&sdc1_off>;
546 vmmc-supply = <&pm8941_l21>;
547 vqmmc-supply = <&pm8941_l13>;
549 cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
551 pinctrl-names = "default", "sleep";
552 pinctrl-0 = <&sdc2_on>;
553 pinctrl-1 = <&sdc2_off>;
559 max-frequency = <100000000>;
560 vmmc-supply = <&vreg_wlan>;
561 non-removable;
563 pinctrl-names = "default";
564 pinctrl-0 = <&sdc3_on>;
566 #address-cells = <1>;
567 #size-cells = <0>;
570 compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
573 brcm,drive-strength = <10>;
575 pinctrl-names = "default";
576 pinctrl-0 = <&wlan_sleep_clk_pin>;
581 qcom,fast-charge-safe-current = <1500000>;
582 qcom,fast-charge-current-limit = <1500000>;
583 qcom,dc-current-limit = <1800000>;
584 usb-charge-current-limit = <1800000>;
585 qcom,fast-charge-safe-voltage = <4400000>;
586 qcom,fast-charge-high-threshold-voltage = <4350000>;
587 qcom,fast-charge-low-threshold-voltage = <3400000>;
588 qcom,auto-recharge-threshold-voltage = <4200000>;
589 qcom,minimum-input-voltage = <4300000>;
595 lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
598 drive-strength = <10>;
599 output-low;
600 bias-disable;
603 sdc1_on: sdc1-on-state {
604 clk-pins {
606 drive-strength = <16>;
607 bias-disable;
610 cmd-data-pins {
612 drive-strength = <10>;
613 bias-pull-up;
617 sdc2_on: sdc2-on-state {
618 clk-pins {
620 drive-strength = <6>;
621 bias-disable;
624 cmd-data-pins {
626 drive-strength = <6>;
627 bias-pull-up;
630 cd-pins {
633 drive-strength = <2>;
634 bias-disable;
638 sdc3_on: sdc3-on-state {
639 clk-pins {
642 drive-strength = <10>;
643 bias-disable;
646 cmd-pins {
649 drive-strength = <10>;
650 bias-pull-up;
653 data-pins {
656 drive-strength = <10>;
657 bias-pull-up;
661 ts_int_pin: ts-int-pin-state {
664 drive-strength = <2>;
665 bias-disable;
668 bt_host_wake_pin: bt-host-wake-state {
671 drive-strength = <2>;
672 bias-disable;
673 output-low;
676 bt_dev_wake_pin: bt-dev-wake-state {
679 drive-strength = <2>;
680 bias-disable;
688 phy-select = <&tcsr 0xb000 0>;
690 vbus-supply = <&chg_otg>;
692 hnp-disable;
693 srp-disable;
694 adp-disable;
700 v1p8-supply = <&pm8941_l6>;
701 v3p3-supply = <&pm8941_l24>;
704 qcom,init-seq = /bits/ 8 <0x1 0x64>;