nxp/imx/imx7-tqma7.dtsi

1 // SPDX-License-Identifier: GPL-2.0 OR X11
3  * Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB.
5  * Copyright (C) 2016 TQ-Systems GmbH
6  * Author: Markus Niebel <Markus.Niebel@tq-group.com>
13 		/* 512 MB - default configuration */
19 	cpu-supply = <&sw1a_reg>;
24 	qspi-reset-hog {
25 		gpio-hog;
28 		line-name = "qspi-reset";
33 	pinctrl-names = "default";
34 	pinctrl-0 = <&pinctrl_i2c1>;
35 	clock-frequency = <100000>;
39 		pinctrl-names = "default";
40 		pinctrl-0 = <&pinctrl_pmic1>;
46 				regulator-min-microvolt = <700000>;
47 				regulator-max-microvolt = <3300000>;
48 				regulator-boot-on;
49 				regulator-always-on;
50 				regulator-ramp-delay = <6250>;
55 				regulator-min-microvolt = <700000>;
56 				regulator-max-microvolt = <1475000>;
57 				regulator-boot-on;
58 				regulator-always-on;
59 				regulator-ramp-delay = <6250>;
63 				regulator-min-microvolt = <1500000>;
64 				regulator-max-microvolt = <1850000>;
65 				regulator-boot-on;
66 				regulator-always-on;
70 				regulator-min-microvolt = <900000>;
71 				regulator-max-microvolt = <1650000>;
72 				regulator-boot-on;
73 				regulator-always-on;
77 				regulator-min-microvolt = <5000000>;
78 				regulator-max-microvolt = <5150000>;
82 				regulator-min-microvolt = <1000000>;
83 				regulator-max-microvolt = <3000000>;
84 				regulator-boot-on;
85 				regulator-always-on;
89 				regulator-boot-on;
90 				regulator-always-on;
94 				regulator-min-microvolt = <1800000>;
95 				regulator-max-microvolt = <3300000>;
96 				regulator-always-on;
100 				regulator-min-microvolt = <800000>;
101 				regulator-max-microvolt = <1550000>;
102 				regulator-always-on;
106 				regulator-min-microvolt = <2850000>;
107 				regulator-max-microvolt = <3300000>;
108 				regulator-always-on;
112 				regulator-min-microvolt = <2850000>;
113 				regulator-max-microvolt = <3300000>;
114 				regulator-always-on;
118 				regulator-min-microvolt = <1800000>;
119 				regulator-max-microvolt = <3300000>;
120 				regulator-always-on;
124 				regulator-min-microvolt = <1800000>;
125 				regulator-max-microvolt = <3300000>;
126 				regulator-always-on;
132 	lm75a: temperature-sensor@48 {
138 	se97b: temperature-sensor-eeprom@1e {
139 		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
255 	pinctrl-names = "default";
256 	pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>;
259 	flash0: flash@0 {  label
260 		compatible = "jedec,spi-nor";
262 		spi-max-frequency = <29000000>;
263 		spi-rx-bus-width = <4>;
264 		spi-tx-bus-width = <4>;
273 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
274 	pinctrl-0 = <&pinctrl_usdhc3>;
275 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
276 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
277 	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
278 	assigned-clock-rates = <400000000>;
279 	bus-width = <8>;
280 	non-removable;
281 	vmmc-supply = <&vgen4_reg>;
282 	vqmmc-supply = <&sw2_reg>;
287 	pinctrl-names = "default";
288 	pinctrl-0 = <&pinctrl_wdog1>;
292 	 * X1-51 (WDOG1#) signal needs carrier board handling to reset
293 	 * TQMa7 on X1-22 (RESET_IN#).
295 	fsl,ext-reset-output;