Lines Matching +full:uart +full:- +full:has +full:- +full:rtscts
6 * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
47 #include <dt-bindings/gpio/gpio.h>
48 #include <dt-bindings/input/input.h>
53 compatible = "nutsboard,imx6q-pistachio", "fsl,imx6q";
56 stdout-path = &uart4;
64 reg_3p3v: regulator-3p3v {
65 compatible = "regulator-fixed";
66 regulator-name = "3P3V";
67 regulator-min-microvolt = <3300000>;
68 regulator-max-microvolt = <3300000>;
71 reg_1p8v: regulator-1p8v {
72 compatible = "regulator-fixed";
73 regulator-name = "1P8V";
74 regulator-min-microvolt = <1800000>;
75 regulator-max-microvolt = <1800000>;
78 wlan_en_reg: regulator-wlan_en {
79 compatible = "regulator-fixed";
80 regulator-name = "wlan-en-regulator";
81 regulator-min-microvolt = <1800000>;
82 regulator-max-microvolt = <1800000>;
84 startup-delay-us = <70000>;
85 enable-active-high;
88 reg_usb_otg_vbus: regulator-usb_vbus {
89 compatible = "regulator-fixed";
90 regulator-name = "usb_otg_vbus";
91 regulator-min-microvolt = <5000000>;
92 regulator-max-microvolt = <5000000>;
94 enable-active-high;
95 vin-supply = <&swbst_reg>;
98 gpio-keys {
99 compatible = "gpio-keys";
100 pinctrl-names = "default";
101 pinctrl-0 = <&pinctrl_gpio_keys>;
103 key-power {
106 wakeup-source;
112 compatible = "fsl,imx-sgtl5000",
113 "fsl,imx-audio-sgtl5000";
114 model = "audio-sgtl5000";
115 ssi-controller = <&ssi1>;
116 audio-codec = <&codec>;
117 audio-routing =
121 mux-int-port = <1>;
122 mux-ext-port = <3>;
125 backlight_lvds: backlight-lvds {
126 compatible = "pwm-backlight";
128 brightness-levels = <
141 default-brightness-level = <94>;
151 remote-endpoint = <&lvds0_out>;
158 pinctrl-names = "default";
159 pinctrl-0 = <&pinctrl_audmux>;
164 pinctrl-names = "default";
165 pinctrl-0 = <&pinctrl_flexcan2>;
170 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
172 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
177 pinctrl-names = "default";
178 pinctrl-0 = <&pinctrl_enet>;
179 phy-mode = "rgmii";
184 ddc-i2c-bus = <&i2c2>;
189 clock-frequency = <100000>;
190 pinctrl-names = "default";
191 pinctrl-0 = <&pinctrl_i2c1>;
196 pinctrl-names = "default";
197 pinctrl-0 = <&pinctrl_i2c1_sgtl5000>;
199 #sound-dai-cells = <0>;
201 VDDA-supply = <®_1p8v>;
202 VDDIO-supply = <®_1p8v>;
207 clock-frequency = <100000>;
208 pinctrl-names = "default";
209 pinctrl-0 = <&pinctrl_i2c2>;
218 regulator-min-microvolt = <300000>;
219 regulator-max-microvolt = <1875000>;
220 regulator-boot-on;
221 regulator-always-on;
222 regulator-ramp-delay = <6250>;
226 regulator-min-microvolt = <300000>;
227 regulator-max-microvolt = <1875000>;
228 regulator-boot-on;
229 regulator-always-on;
230 regulator-ramp-delay = <6250>;
234 regulator-min-microvolt = <800000>;
235 regulator-max-microvolt = <3300000>;
236 regulator-boot-on;
237 regulator-always-on;
238 regulator-ramp-delay = <6250>;
242 regulator-min-microvolt = <400000>;
243 regulator-max-microvolt = <1975000>;
244 regulator-boot-on;
245 regulator-always-on;
249 regulator-min-microvolt = <400000>;
250 regulator-max-microvolt = <1975000>;
251 regulator-boot-on;
252 regulator-always-on;
256 regulator-min-microvolt = <800000>;
257 regulator-max-microvolt = <3300000>;
261 regulator-min-microvolt = <5000000>;
262 regulator-max-microvolt = <5150000>;
266 regulator-min-microvolt = <1000000>;
267 regulator-max-microvolt = <3000000>;
268 regulator-boot-on;
269 regulator-always-on;
273 regulator-boot-on;
274 regulator-always-on;
278 regulator-min-microvolt = <800000>;
279 regulator-max-microvolt = <1550000>;
283 regulator-min-microvolt = <800000>;
284 regulator-max-microvolt = <1550000>;
288 regulator-min-microvolt = <1800000>;
289 regulator-max-microvolt = <3300000>;
293 regulator-min-microvolt = <1800000>;
294 regulator-max-microvolt = <3300000>;
295 regulator-always-on;
299 regulator-min-microvolt = <1800000>;
300 regulator-max-microvolt = <3300000>;
301 regulator-always-on;
304 regulator-min-microvolt = <1800000>;
305 regulator-max-microvolt = <3300000>;
306 regulator-always-on;
312 compatible = "microchip,ar1021-i2c";
314 interrupt-parent = <&gpio6>;
320 clock-frequency = <100000>;
321 pinctrl-names = "default";
322 pinctrl-0 = <&pinctrl_i2c3>;
327 pinctrl-names = "default";
382 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
439 pinctrl_i2c1_sgtl5000: i2c1-sgtl5000grp {
558 lvds-channel@1 {
559 fsl,data-mapping = "spwg";
560 fsl,data-width = <18>;
567 remote-endpoint = <&panel_in>;
574 #pwm-cells = <2>;
575 pinctrl-names = "default";
576 pinctrl-0 = <&pinctrl_pwm1>;
589 pinctrl-names = "default";
590 pinctrl-0 = <&pinctrl_uart1>;
591 uart-has-rtscts;
592 fsl,dte-mode;
597 pinctrl-names = "default";
598 pinctrl-0 = <&pinctrl_uart2>;
599 uart-has-rtscts;
604 pinctrl-names = "default";
605 pinctrl-0 = <&pinctrl_uart3>;
606 uart-has-rtscts;
611 pinctrl-names = "default";
612 pinctrl-0 = <&pinctrl_uart4>;
613 uart-has-rtscts;
618 pinctrl-names = "default";
619 pinctrl-0 = <&pinctrl_uart5>;
620 uart-has-rtscts;
625 vbus-supply = <®_usb_otg_vbus>;
626 pinctrl-names = "default";
627 pinctrl-0 = <&pinctrl_usbotg>;
628 disable-over-current;
629 srp-disable;
630 hnp-disable;
631 adp-disable;
640 fsl,tx-d-cal = <79>;
644 fsl,tx-d-cal = <79>;
648 pinctrl-names = "default";
649 pinctrl-0 = <&pinctrl_usdhc1>;
650 bus-width = <8>;
651 keep-power-in-suspend;
652 vmmc-supply = <®_3p3v>;
657 pinctrl-names = "default";
658 pinctrl-0 = <&pinctrl_usdhc2>;
659 bus-width = <4>;
660 vmmc-supply = <&wlan_en_reg>;
661 no-1-8-v;
662 keep-power-in-suspend;
663 non-removable;
664 cap-power-off-card;
667 #address-cells = <1>;
668 #size-cells = <0>;
672 interrupt-parent = <&gpio5>;
674 ref-clock-frequency = <38400000>;
675 tcxo-clock-frequency = <26000000>;
680 pinctrl-names = "default";
681 pinctrl-0 = <&pinctrl_usdhc3>;
682 bus-width = <4>;
683 cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
684 no-1-8-v;
685 keep-power-in-suspend;
686 wakeup-source;