nxp/imx/imx53-usbarmory.dts

8  * This file is dual-licensed: you can use it either under the terms
47 /dts-v1/;
52 	compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
57 		stdout-path = &uart1;
66 		compatible = "gpio-leds";
67 		pinctrl-names = "default";
68 		pinctrl-0 = <&pinctrl_led>;
70 		led-user {
73 			linux,default-trigger = "heartbeat";
83 	operating-points = <
92 	pinctrl-names = "default";
93 	pinctrl-0 = <&pinctrl_esdhc1>;
124 	 * 3 - GPIO5[26], pull-down 100K
125 	 * 4 - GPIO5[27], pull-down 100K
126 	 * 5 - TX, pull-up 100K
127 	 * 6 - RX, pull-up 100K
128 	 * 7 - GPIO5[30], pull-down 100K
142 	pinctrl-0 = <&pinctrl_i2c1_pmic>;
146 		compatible = "lltc,ltc3589-2";
151 				regulator-min-microvolt = <591930>;
152 				regulator-max-microvolt = <1224671>;
153 				lltc,fb-voltage-divider = <100000 158000>;
154 				regulator-ramp-delay = <7000>;
155 				regulator-boot-on;
156 				regulator-always-on;
160 				regulator-min-microvolt = <704123>;
161 				regulator-max-microvolt = <1456803>;
162 				lltc,fb-voltage-divider = <180000 191000>;
163 				regulator-ramp-delay = <7000>;
164 				regulator-boot-on;
165 				regulator-always-on;
169 				regulator-min-microvolt = <1341250>;
170 				regulator-max-microvolt = <2775000>;
171 				lltc,fb-voltage-divider = <270000 100000>;
172 				regulator-ramp-delay = <7000>;
173 				regulator-boot-on;
174 				regulator-always-on;
177 			bb_out_reg: bb-out {
178 				regulator-min-microvolt = <3387341>;
179 				regulator-max-microvolt = <3387341>;
180 				lltc,fb-voltage-divider = <511000 158000>;
181 				regulator-boot-on;
182 				regulator-always-on;
186 				regulator-min-microvolt = <1306329>;
187 				regulator-max-microvolt = <1306329>;
188 				lltc,fb-voltage-divider = <100000 158000>;
189 				regulator-boot-on;
190 				regulator-always-on;
194 				regulator-min-microvolt = <704123>;
195 				regulator-max-microvolt = <1456806>;
196 				lltc,fb-voltage-divider = <180000 191000>;
197 				regulator-ramp-delay = <7000>;
198 				regulator-boot-on;
199 				regulator-always-on;
203 				regulator-min-microvolt = <2800000>;
204 				regulator-max-microvolt = <2800000>;
205 				regulator-boot-on;
209 				regulator-min-microvolt = <1200000>;
210 				regulator-max-microvolt = <3200000>;
217 	pinctrl-names = "default";
218 	pinctrl-0 = <&pinctrl_uart1>;