dts/nspire/nspire.dtsi

1 // SPDX-License-Identifier: GPL-2.0-only
7 	#address-cells = <1>;
8 	#size-cells = <1>;
9 	interrupt-parent = <&intc>;
12 		#address-cells = <1>;
13 		#size-cells = <0>;
16 			compatible = "arm,arm926ej-s";
18 			reg = <0>;
23 		reg = <0x00000000 0x80000>;
27 		compatible = "mmio-sram";
28 		reg = <0xa4000000 0x20000>; /* 128k */
29 		#address-cells = <1>;
30 		#size-cells = <1>;
34 			reg = <0x0 0x20000>;
39 		#clock-cells = <0>;
40 		compatible = "fixed-clock";
41 		clock-frequency = <32768>;
45 		#clock-cells = <0>;
46 		reg = <0x900b0024 0x4>;
50 		#clock-cells = <0>;
51 		reg = <0x900b0024 0x4>;
56 		#clock-cells = <0>;
57 		compatible = "fixed-factor-clock";
58 		clock-div = <2>;
59 		clock-mult = <1>;
64 		compatible = "usb-nop-xceiv";
65 		#phy-cells = <0>;
69 		compatible = "regulator-fixed";
71 		regulator-name = "USB VBUS output";
73 		regulator-min-microvolt = <5000000>;
74 		regulator-max-microvolt = <5000000>;
78 		compatible = "simple-bus";
79 		#address-cells = <1>;
80 		#size-cells = <1>;
84 			reg = <0xa9000000 0x1000>;
88 			compatible = "lsi,zevio-usb";
89 			reg = <0xb0000000 0x1000>;
92 			usb-phy = <&usb_phy>;
93 			vbus-supply = <&vbus_reg>;
97 			reg = <0xb4000000 0x1000>;
104 			reg = <0xc0000000 0x1000>;
114 			clock-names = "clcdclk", "apb_pclk";
118 			reg = <0xc4000000 0x1000>;
123 			reg = <0xc8010000 0x1000>;
127 			reg = <0xcc000000 0x1000>;
131 			compatible = "simple-bus";
132 			#address-cells = <1>;
133 			#size-cells = <1>;
134 			clock-ranges;
138 				compatible = "lsi,zevio-gpio";
139 				reg = <0x90000000 0x1000>;
141 				gpio-controller;
142 				#gpio-cells = <2>;
146 				reg = <0x90010000 0x1000>;
151 				reg = <0x90020000 0x1000>;
156 				reg = <0x900c0000 0x1000>;
159 				clock-names = "timer0clk", "timer1clk",
164 				reg = <0x900d0000 0x1000>;
168 				clock-names = "timer0clk", "timer1clk",
174 				reg = <0x90060000 0x1000>;
179 				reg = <0x90090000 0x1000>;
184 				compatible = "ti,nspire-misc", "syscon", "simple-mfd";
185 				reg = <0x900a0000 0x1000>;
188 					compatible = "syscon-reboot";
195 				reg = <0x900b0000 0x1000>;
200 				compatible = "ti,nspire-keypad";
201 				reg = <0x900e0000 0x1000>;
204 				scan-interval = <1000>;
205 				row-delay = <200>;
211 				reg = <0x900f0000 0x1000>;
215 				reg = <0x90110000 0x1000>;