dts/aspeed/aspeed-g5.dtsi

1 // SPDX-License-Identifier: GPL-2.0+
2 #include <dt-bindings/clock/aspeed-clock.h>
3 #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
7 	compatible = "aspeed,ast2500";
8 	#address-cells = <1>;
9 	#size-cells = <1>;
10 	interrupt-parent = <&vic>;
36 		#address-cells = <1>;
37 		#size-cells = <0>;
40 			compatible = "arm,arm1176jzf-s";
52 		compatible = "simple-bus";
53 		#address-cells = <1>;
54 		#size-cells = <1>;
59 			#address-cells = <1>;
60 			#size-cells = <0>;
61 			compatible = "aspeed,ast2500-fmc";
67 				compatible = "jedec,spi-nor";
68 				spi-max-frequency = <50000000>;
69 				spi-rx-bus-width = <2>;
74 				compatible = "jedec,spi-nor";
75 				spi-max-frequency = <50000000>;
76 				spi-rx-bus-width = <2>;
81 				compatible = "jedec,spi-nor";
82 				spi-max-frequency = <50000000>;
83 				spi-rx-bus-width = <2>;
90 			#address-cells = <1>;
91 			#size-cells = <0>;
92 			compatible = "aspeed,ast2500-spi";
97 				compatible = "jedec,spi-nor";
98 				spi-max-frequency = <50000000>;
99 				spi-rx-bus-width = <2>;
104 				compatible = "jedec,spi-nor";
105 				spi-max-frequency = <50000000>;
106 				spi-rx-bus-width = <2>;
113 			#address-cells = <1>;
114 			#size-cells = <0>;
115 			compatible = "aspeed,ast2500-spi";
120 				compatible = "jedec,spi-nor";
121 				spi-max-frequency = <50000000>;
122 				spi-rx-bus-width = <2>;
127 				compatible = "jedec,spi-nor";
128 				spi-max-frequency = <50000000>;
129 				spi-rx-bus-width = <2>;
134 		vic: interrupt-controller@1e6c0080 {
135 			compatible = "aspeed,ast2400-vic";
136 			interrupt-controller;
137 			#interrupt-cells = <1>;
138 			valid-sources = <0xfefff7ff 0x0807ffff>;
142 		cvic: copro-interrupt-controller@1e6c2000 {
143 			compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
144 			valid-sources = <0xffffffff>;
145 			copro-sw-interrupts = <1>;
150 			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
158 			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
166 			compatible = "aspeed,ast2500-ehci", "generic-ehci";
170 			pinctrl-names = "default";
171 			pinctrl-0 = <&pinctrl_usb2ah_default>;
176 			compatible = "aspeed,ast2500-ehci", "generic-ehci";
180 			pinctrl-names = "default";
181 			pinctrl-0 = <&pinctrl_usb2bh_default>;
186 			compatible = "aspeed,ast2500-uhci", "generic-uhci";
198 		vhub: usb-vhub@1e6a0000 {
199 			compatible = "aspeed,ast2500-usb-vhub";
203 			aspeed,vhub-downstream-ports = <5>;
204 			aspeed,vhub-generic-endpoints = <15>;
205 			pinctrl-names = "default";
206 			pinctrl-0 = <&pinctrl_usb2ad_default>;
211 			compatible = "simple-bus";
212 			#address-cells = <1>;
213 			#size-cells = <1>;
216 			edac: memory-controller@1e6e0000 {
217 				compatible = "aspeed,ast2500-sdram-edac";
224 				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
226 				#address-cells = <1>;
227 				#size-cells = <1>;
229 				#clock-cells = <1>;
230 				#reset-cells = <1>;
232 				scu_ic: interrupt-controller@18 {
233 					#interrupt-cells = <1>;
234 					compatible = "aspeed,ast2500-scu-ic";
237 					interrupt-controller;
240 				p2a: p2a-control@2c {
241 					compatible = "aspeed,ast2500-p2a-ctrl";
246 				silicon-id@7c {
247 					compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
252 					compatible = "aspeed,ast2500-pinctrl";
254 					aspeed,external-nodes = <&gfx>, <&lhc>;
266 				compatible = "aspeed,ast2500-hace";
274 				compatible = "aspeed,ast2500-gfx", "syscon";
276 				reg-io-width = <4>;
285 				compatible = "aspeed,ast2500-xdma";
289 				interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
290 				aspeed,pcie-device = "bmc";
296 				compatible = "aspeed,ast2500-adc";
300 				#io-channel-cells = <1>;
305 				compatible = "aspeed,ast2500-video-engine";
309 				clock-names = "vclk", "eclk";
315 				compatible = "mmio-sram";
319 			sdmmc: sd-controller@1e740000 {
320 				compatible = "aspeed,ast2500-sd-controller";
322 				#address-cells = <1>;
323 				#size-cells = <1>;
329 					compatible = "aspeed,ast2500-sdhci";
332 					sdhci,auto-cmd12;
338 					compatible = "aspeed,ast2500-sdhci";
341 					sdhci,auto-cmd12;
348 				#gpio-cells = <2>;
349 				gpio-controller;
350 				compatible = "aspeed,ast2500-gpio";
353 				gpio-ranges = <&pinctrl 0 0 232>;
355 				interrupt-controller;
356 				#interrupt-cells = <2>;
360 				#gpio-cells = <2>;
361 				compatible = "aspeed,ast2500-sgpio";
362 				gpio-controller;
366 				#interrupt-cells = <2>;
367 				interrupt-controller;
368 				bus-frequency = <12000000>;
369 				pinctrl-names = "default";
370 				pinctrl-0 = <&pinctrl_sgpm_default>;
375 				compatible = "aspeed,ast2500-rtc";
382 				compatible = "aspeed,ast2400-timer";
386 				clock-names = "PCLK";
392 				reg-shift = <2>;
396 				no-loopback-test;
403 				reg-shift = <2>;
406 				no-loopback-test;
411 				compatible = "aspeed,ast2500-wdt";
417 				compatible = "aspeed,ast2500-wdt";
423 				compatible = "aspeed,ast2500-wdt";
429 			pwm_tacho: pwm-tacho-controller@1e786000 {
430 				compatible = "aspeed,ast2500-pwm-tacho";
431 				#address-cells = <1>;
432 				#size-cells = <0>;
440 				compatible = "aspeed,ast2500-vuart";
442 				reg-shift = <2>;
445 				no-loopback-test;
450 				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
452 				reg-io-width = <4>;
454 				#address-cells = <1>;
455 				#size-cells = <1>;
459 					compatible = "aspeed,ast2500-kcs-bmc-v2";
467 					compatible = "aspeed,ast2500-kcs-bmc-v2";
475 					compatible = "aspeed,ast2500-kcs-bmc-v2";
483 					compatible = "aspeed,ast2500-kcs-bmc-v2";
490 				lpc_ctrl: lpc-ctrl@80 {
491 					compatible = "aspeed,ast2500-lpc-ctrl";
497 				lpc_snoop: lpc-snoop@90 {
498 					compatible = "aspeed,ast2500-lpc-snoop";
505 				lpc_reset: reset-controller@98 {
506 					compatible = "aspeed,ast2500-lpc-reset";
508 					#reset-cells = <1>;
511 				uart_routing: uart-routing@9c {
512 					compatible = "aspeed,ast2500-uart-routing";
518 					compatible = "aspeed,ast2500-lhc";
524 					compatible = "aspeed,ast2500-ibt-bmc";
532 			peci0: peci-controller@1e78b000 {
533 				compatible = "aspeed,ast2500-peci";
538 				cmd-timeout-ms = <1000>;
539 				clock-frequency = <1000000>;
546 				reg-shift = <2>;
550 				no-loopback-test;
557 				reg-shift = <2>;
561 				no-loopback-test;
568 				reg-shift = <2>;
572 				no-loopback-test;
576 			i2c: bus@1e78a000 {  label
577 				compatible = "simple-bus";
578 				#address-cells = <1>;
579 				#size-cells = <1>;
586 &i2c {
587 	i2c_ic: interrupt-controller@0 {
588 		#interrupt-cells = <1>;
589 		compatible = "aspeed,ast2500-i2c-ic";
592 		interrupt-controller;
595 	i2c0: i2c-bus@40 {
596 		#address-cells = <1>;
597 		#size-cells = <0>;
600 		compatible = "aspeed,ast2500-i2c-bus";
603 		bus-frequency = <100000>;
605 		interrupt-parent = <&i2c_ic>;
610 	i2c1: i2c-bus@80 {
611 		#address-cells = <1>;
612 		#size-cells = <0>;
615 		compatible = "aspeed,ast2500-i2c-bus";
618 		bus-frequency = <100000>;
620 		interrupt-parent = <&i2c_ic>;
625 	i2c2: i2c-bus@c0 {
626 		#address-cells = <1>;
627 		#size-cells = <0>;
630 		compatible = "aspeed,ast2500-i2c-bus";
633 		bus-frequency = <100000>;
635 		interrupt-parent = <&i2c_ic>;
636 		pinctrl-names = "default";
637 		pinctrl-0 = <&pinctrl_i2c3_default>;
641 	i2c3: i2c-bus@100 {
642 		#address-cells = <1>;
643 		#size-cells = <0>;
646 		compatible = "aspeed,ast2500-i2c-bus";
649 		bus-frequency = <100000>;
651 		interrupt-parent = <&i2c_ic>;
652 		pinctrl-names = "default";
653 		pinctrl-0 = <&pinctrl_i2c4_default>;
657 	i2c4: i2c-bus@140 {
658 		#address-cells = <1>;
659 		#size-cells = <0>;
662 		compatible = "aspeed,ast2500-i2c-bus";
665 		bus-frequency = <100000>;
667 		interrupt-parent = <&i2c_ic>;
668 		pinctrl-names = "default";
669 		pinctrl-0 = <&pinctrl_i2c5_default>;
673 	i2c5: i2c-bus@180 {
674 		#address-cells = <1>;
675 		#size-cells = <0>;
678 		compatible = "aspeed,ast2500-i2c-bus";
681 		bus-frequency = <100000>;
683 		interrupt-parent = <&i2c_ic>;
684 		pinctrl-names = "default";
685 		pinctrl-0 = <&pinctrl_i2c6_default>;
689 	i2c6: i2c-bus@1c0 {
690 		#address-cells = <1>;
691 		#size-cells = <0>;
694 		compatible = "aspeed,ast2500-i2c-bus";
697 		bus-frequency = <100000>;
699 		interrupt-parent = <&i2c_ic>;
700 		pinctrl-names = "default";
701 		pinctrl-0 = <&pinctrl_i2c7_default>;
705 	i2c7: i2c-bus@300 {
706 		#address-cells = <1>;
707 		#size-cells = <0>;
710 		compatible = "aspeed,ast2500-i2c-bus";
713 		bus-frequency = <100000>;
715 		interrupt-parent = <&i2c_ic>;
716 		pinctrl-names = "default";
717 		pinctrl-0 = <&pinctrl_i2c8_default>;
721 	i2c8: i2c-bus@340 {
722 		#address-cells = <1>;
723 		#size-cells = <0>;
726 		compatible = "aspeed,ast2500-i2c-bus";
729 		bus-frequency = <100000>;
731 		interrupt-parent = <&i2c_ic>;
732 		pinctrl-names = "default";
733 		pinctrl-0 = <&pinctrl_i2c9_default>;
737 	i2c9: i2c-bus@380 {
738 		#address-cells = <1>;
739 		#size-cells = <0>;
742 		compatible = "aspeed,ast2500-i2c-bus";
745 		bus-frequency = <100000>;
747 		interrupt-parent = <&i2c_ic>;
748 		pinctrl-names = "default";
749 		pinctrl-0 = <&pinctrl_i2c10_default>;
753 	i2c10: i2c-bus@3c0 {
754 		#address-cells = <1>;
755 		#size-cells = <0>;
758 		compatible = "aspeed,ast2500-i2c-bus";
761 		bus-frequency = <100000>;
763 		interrupt-parent = <&i2c_ic>;
764 		pinctrl-names = "default";
765 		pinctrl-0 = <&pinctrl_i2c11_default>;
769 	i2c11: i2c-bus@400 {
770 		#address-cells = <1>;
771 		#size-cells = <0>;
774 		compatible = "aspeed,ast2500-i2c-bus";
777 		bus-frequency = <100000>;
779 		interrupt-parent = <&i2c_ic>;
780 		pinctrl-names = "default";
781 		pinctrl-0 = <&pinctrl_i2c12_default>;
785 	i2c12: i2c-bus@440 {
786 		#address-cells = <1>;
787 		#size-cells = <0>;
790 		compatible = "aspeed,ast2500-i2c-bus";
793 		bus-frequency = <100000>;
795 		interrupt-parent = <&i2c_ic>;
796 		pinctrl-names = "default";
797 		pinctrl-0 = <&pinctrl_i2c13_default>;
801 	i2c13: i2c-bus@480 {
802 		#address-cells = <1>;
803 		#size-cells = <0>;
806 		compatible = "aspeed,ast2500-i2c-bus";
809 		bus-frequency = <100000>;
811 		interrupt-parent = <&i2c_ic>;
812 		pinctrl-names = "default";
813 		pinctrl-0 = <&pinctrl_i2c14_default>;