Lines Matching +refs:queue +refs:get +refs:op

307 BIOS/SETUP, you can configure tagged queueing feature and device queue
312 will set tagged commands queue depths as follow:
324 - Each time a QUEUE FULL status is returned, tagged queue depth is reduced
333 device queue depth change.
335 impact on performances is not too bad. You can get rid of the messages by
378 and you will get something like the following text::
462 	(time from SCSI status get to command completion call)
549         queue    print info about insertions into the command start queue
641     Default tagged command queue depth.
802   This option also allows to specify a command queue depth for each device
809   will set devices queue depth as follow:
885 burst:255  get burst length from initial IO register settings.
1095 "ncr53c8xx=verb:2" to get the "static" setup of the driver, or add "verb:2"
1142 to control what information the driver will get from the NVRAM and what
1149 The parameters the driver is able to get from the NVRAM depend on the
1281 	during  scsi transfer processing: burst op-code fetch, read multiple,
1989 	0x00001000 - queue tags enabled