Lines Matching +full:fast +full:- +full:speed
1 .. SPDX-License-Identifier: GPL-2.0
21 Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
57 BT-948/958/958D, will always be available from my Linux Home Page at URL
69 the BT-948 PCI Ultra SCSI Host Adapter, and then again for the BT-958 PCI Wide
90 94555, USA and can be reached at 510/796-6100 or on the World Wide Web at
92 mail at techsup@mylex.com, by Voice at 510/608-2400, or by FAX at 510/745-7715.
101 -----------------------------------
116 adapter will attempt to negotiate for 20.0 mega-transfers/second.
118 Synchronous Negotiation: Fast
121 adapter will attempt to negotiate for 10.0 mega-transfers/second.
126 adapter will attempt to negotiate for 5.0 mega-transfers/second.
135 Synchronous negotiation to Ultra speed is enabled for target devices 0
136 and 4 through 15, to Fast speed for target device 1, to Slow speed for
144 --------------------
146 BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
158 the number, type, speed, and capabilities of the target devices found. In
165 -------------------
180 handled by issuing a soft reset to the host adapter and re-initialization.
190 -------------------------
198 The ISA compatible I/O port is disabled by default on the BT-948/958/958D.
201 -------------------------
208 -------------------------
225 FlashPoint LT (BT-930) Ultra SCSI-3
226 FlashPoint LT (BT-930R) Ultra SCSI-3 with RAIDPlus
227 FlashPoint LT (BT-920) Ultra SCSI-3 (BT-930 without BIOS)
228 FlashPoint DL (BT-932) Dual Channel Ultra SCSI-3
229 FlashPoint DL (BT-932R) Dual Channel Ultra SCSI-3 with RAIDPlus
230 FlashPoint LW (BT-950) Wide Ultra SCSI-3
231 FlashPoint LW (BT-950R) Wide Ultra SCSI-3 with RAIDPlus
232 FlashPoint DW (BT-952) Dual Channel Wide Ultra SCSI-3
233 FlashPoint DW (BT-952R) Dual Channel Wide Ultra SCSI-3 with RAIDPlus
239 BT-948 PCI Ultra SCSI-3
240 BT-958 PCI Wide Ultra SCSI-3
241 BT-958D PCI Wide Differential Ultra SCSI-3
247 BT-946C PCI Fast SCSI-2
248 BT-956C PCI Wide Fast SCSI-2
249 BT-956CD PCI Wide Differential Fast SCSI-2
250 BT-445C VLB Fast SCSI-2
251 BT-747C EISA Fast SCSI-2
252 BT-757C EISA Wide Fast SCSI-2
253 BT-757CD EISA Wide Differential Fast SCSI-2
259 BT-445S VLB Fast SCSI-2
260 BT-747S EISA Fast SCSI-2
261 BT-747D EISA Differential Fast SCSI-2
262 BT-757S EISA Wide Fast SCSI-2
263 BT-757D EISA Wide Differential Fast SCSI-2
264 BT-742A EISA SCSI-2 (742A revision H)
270 BT-742A EISA SCSI-2 (742A revisions A - G)
277 retail kits. The BT- model numbers above refer to the bare board packaging.
278 The retail kit model numbers are found by replacing BT- with KT- in the above
287 ----------------
292 striping (RAID-0), and support for mirroring (RAID-1), fixed parity (RAID-4),
293 and distributed parity (RAID-5) is available separately. The built-in Linux
299 ----------------------------
302 Default" settings that are conservative and do not allow for UltraSCSI speed
306 respond to synchronous transfer negotiation for UltraSCSI speed. AutoSCSI
308 speed to be negotiated with all devices, or UltraSCSI speed can be enabled on
313 BT-948/958/958D Installation Notes
316 The BT-948/958/958D PCI Ultra SCSI Host Adapters have some features which may
320 ------------------------
322 When configured to factory default settings, the BT-948/958/958D will only
324 The BT-948/958/958D will not respond to any of the ISA compatible I/O ports
333 Ctrl-B at system startup and select "Adapter Configuration", "View/Modify
337 possible future I/O port conflicts. The older BT-946C/956C/956CD also have
341 -----------------------
344 PCI slots are scanned may appear reversed with the BT-948/958/958D as
345 compared to the BT-946C/956C/956CD. For booting from a SCSI disk to work
358 factory default settings of the BT-948/958/958D enumerate the host adapters
360 the AutoSCSI utility via Ctrl-B at system startup and select "Adapter
361 Configuration", "View/Modify Configuration", press Ctrl-F10, and then change
369 ----------------------------
371 The BT-948/958/958D ship with their configuration set to "Factory Default"
372 settings that are conservative and do not allow for UltraSCSI speed to be
376 to synchronous transfer negotiation for UltraSCSI speed. AutoSCSI may be
377 used to load "Optimum Performance" settings which allow UltraSCSI speed to be
378 negotiated with all devices, or UltraSCSI speed can be enabled on an
445 on the Host Adapter's Total Queue Depth and the number, type, speed, and
475 TaggedQueuing:<Target-Spec>
477 The "TaggedQueuing:<Target-Spec>" or "TQ:<Target-Spec>" option controls
478 Tagged Queuing individually for each Target Device. <Target-Spec> is a
563 tar -xvzf BusLogic-2.0.15.tar.gz
565 patch -p0 < BusLogic.patch (only for 2.0.33 and below)
580 "buslogic-announce-request@dandelion.com" with the line "subscribe" in the