Lines Matching full:default
11 - 0 - disabled (default)
17 parameters to their default state (RFC1122 for hosts, RFC1812
21 Default value of TTL field (Time To Live) for outgoing (but not
23 Default: 64 (as recommended by RFC1700)
50 Default: FALSE
53 default 552 - minimum Path MTU. Unless this is changed manually,
57 By default we don't trust protocol path MTUs while forwarding
65 Default: 0 (disabled)
78 Default: 0
86 Default: 0 (disabled)
97 Default: 0 (Layer 3)
132 Default: 0x0007 (source IP, destination IP and IP protocol)
138 Default: 512kB Minimum: 64kB Maximum: 64MB
145 Default: 1 (Update priority.)
162 neigh/default/gc_thresh1 - INTEGER
166 Default: 128
168 neigh/default/gc_thresh2 - INTEGER
173 Default: 512
175 neigh/default/gc_thresh3 - INTEGER
180 Default: 1024
182 neigh/default/unres_qlen_bytes - INTEGER
189 Default: SK_WMEM_MAX, (same as net.core.wmem_default).
195 neigh/default/unres_qlen - INTEGER
201 Prior to linux 3.3, the default value is 3 which may cause
202 unexpected packet loss. The current default value is calculated
203 according to default value of unres_qlen_bytes and true size of
206 Default: 101
208 neigh/default/interval_probe_time_ms - INTEGER
212 Default: 5000
234 Default: 0 (Do not emit notifications.)
277 Default: 64
284 Default: 0
317 reset them. Default state is FALSE. It means that if overflow
331 Default: 1
338 Default is "reno" and the default setting (tcp_congestion_control).
346 Default: 31
357 Default : 1
373 Default : 48
382 Default : 48 (at least 8 bytes of payload per segment)
388 Default is set as part of kernel configuration.
407 Default: 3
426 Default: 2
436 Default: 1 (fallback enabled)
451 Default: 60 seconds
460 By default it's enabled with a non-zero value. 0 disables F-RTO.
471 Default: 0
493 Default: 500 (milliseconds).
497 Default: 2hours.
501 connection is broken. Default value: 9.
506 after probes started. Default value: 75sec i.e. connection
517 Default: 0 (disabled)
529 if network conditions require more than default value,
554 if network conditions require more than default value.
579 Default: 300
585 default.
592 - 1 - Disabled by default, enabled when an ICMP black hole detected
597 Discovery reprobe. The default is reprobing every 10 minutes as
602 will stop in respect to the width of search range in bytes. Default
606 By default, TCP saves various connection metrics in the route cache
616 Default is 1, which disables ssthresh metrics.
623 The default value is 8.
643 Default: 0x1
653 Default: 0 (disabled)
660 Default: 3
667 Default: 300
681 default.
690 The default value of 15 yields a hypothetical timeout of 924.6
703 Default: 0
705 tcp_rmem - vector of 3 INTEGERs: min, default, max
710 Default: 4K
712 default: initial size of receive buffer used by TCP sockets.
714 Default: 131072 bytes.
722 Default: between 131072 and 6MB, depending on RAM size.
730 The default is 1ms, based on TSO autosizing period.
732 Default : 1,000,000 ns (1 ms)
740 Default : 100,000 ns (100 us)
746 Default : 44
753 Default : true
761 Default: 1
768 Default: FALSE
772 be retransmitted. Should not be higher than 255. Default value
781 Default: 1
825 Default: 0
831 The client support is enabled by flag 0x1 (on by default). The client
835 The server support is enabled by flag 0x2 (off by default). Then
851 default without explicit TCP_FASTOPEN socket option.
854 Default: 0x1
867 By default, it is set to 0 (feature is disabled).
891 will be retransmitted. Should not be higher than 127. Default value
905 Default: 1
916 Default: 2
939 Default: 9 (2^9 = 512 usec)
948 Default: 200
956 Default: 120
966 Default: 4
974 Default: 3
987 Default: 2
1005 Default: 0
1007 tcp_wmem - vector of 3 INTEGERs: min, default, max
1011 Default: 4K
1013 default: initial size of send buffer used by TCP sockets. This
1018 Default: 16K
1026 Default: between 64K and 4MB, depending on RAM size.
1039 Default: UINT_MAX (0xFFFFFFFF)
1047 Default: 0
1060 Default: 0
1072 Default: 1048576 (16 * 65536)
1080 Default: INT_MAX (unlimited)
1104 Note also that the default value of tcp_max_tw_buckets and
1109 Default: 0
1133 Default: FALSE
1143 Default: 3
1154 Default: 12
1166 Default: 60
1184 Default: 128
1192 This threshold is 1 by default, but some applications may need a higher
1197 Default: 1
1209 Default: 0 (disabled)
1220 Default is calculated at boot time from amount of available memory.
1227 Default: 4K
1256 Default: 0
1269 Default: 1 (enabled)
1281 Default: 1
1291 Default: 10
1299 Default: 0
1309 Default: 0
1321 The default values are 32768 and 60999 respectively.
1354 Default: Empty
1363 Default: 1024
1369 Default: 0
1372 By default, bind() does not select the ports automatically even if
1378 Default: 0
1386 Default: 0
1396 Default: 1
1400 The default is "1 0", meaning, that nobody (not even root) may
1408 Default: 1
1414 Default: 1
1420 Default: 0
1426 Default: 0
1432 Default: 1
1442 Default: 1000
1450 Default: 1000
1457 Default: 50
1464 Default mask: 0000001100000011000 (6168)
1484 .. [1] These are rate limited by default (see default mask above)
1492 Default: 1
1509 Default: 0
1513 Default: 20
1537 Default: 10
1542 Default: 2 (as specified by RFC2236 8.1)
1547 - 0 - (default) No enforcement of a IGMP version, IGMPv1/v2 fallback
1554 - 3 - Enforce to use IGMP version 3. The same react with default 0.
1561 this value as default 0 is recommended.
1590 default:
1609 The default value 0 means that the device is the only interface
1660 default TRUE
1673 default TRUE
1682 Default: TRUE
1691 default FALSE
1700 default
1709 default FALSE
1715 default FALSE
1722 By default failed packets are discarded.
1735 Default value is 0. Note that some distributions enable it
1755 Default value is 0.
1765 - 0 - (default) The kernel can respond to arp requests with addresses
1781 - 0 - (default) Use any local address, configured on any interface
1812 - 0 - (default): reply for any local target IP address, configured
1831 0 (default): do nothing
1857 remain as the default (1).
1859 - 1 - (default): Clear the ARP cache on NOCARRIER events
1890 Default: 10000 (10 seconds)
1896 Default: 1000 (1 seconds)
1911 1122, but is disabled by default for compatibility reasons.
1913 Default: off (0)
1920 Default: off (0)
1926 Default value is 0.
1938 Default TRUE
1960 Default value for IPV6_V6ONLY socket option,
1967 Default: FALSE (as specified in RFC3493)
1977 Default: TRUE
1987 1 automatic flow labels are enabled by default, they can be
1996 Default: 1
2006 Default: true
2028 Default: 0
2033 Default: 0 (Layer 3)
2068 Default: 0x0007 (source IP, destination IP and IP protocol)
2077 Default: FALSE
2084 Default: 1 (as specified in RFC7217)
2090 Default: 3 (as specified in RFC7217)
2095 Default: 2 (as specified by RFC3810 9.1)
2105 Default: 8
2113 Default: 8
2119 Default: INT_MAX (unlimited)
2125 Default: INT_MAX (unlimited)
2130 generate this message; IPv6 does by default. Setting this sysctl
2134 Default: false (generate message)
2139 default which means route dumps and notifications contain the new
2146 Default: true (backward compat mode)
2161 Default: 0 (Do not emit notifications.)
2175 Default: 0xFFFFFF
2184 Default: 0xFFFFFFFFFFFFFF
2200 ``conf/default/*``:
2201 Change the interface-specific default settings.
2212 Changing this value is same as changing ``conf/default/disable_ipv6``
2241 Default: 0
2266 Functional default:
2272 Learn default router in Router Advertisement.
2274 Functional default:
2280 Route metric for default route learned in Router Advertisement. This value
2281 will be assigned as metric for the default route learned via IPv6 Router
2287 Default: IP6_RT_PRIO_USER i.e. 1024.
2293 Default is to NOT accept these as it may be an un-intended
2296 Functional default:
2309 Default: 1
2317 Default: 0
2322 Functional default:
2336 Default: 0 (disabled)
2344 Functional default:
2355 Functional default:
2363 Functional default:
2372 Functional default:
2380 Functional default:
2391 Default: 0
2397 Functional default:
2405 Default: 1
2422 By default, Host behaviour is assumed. This means:
2425 2. If accept_ra is TRUE (default), transmit Router
2427 3. If accept_ra is TRUE (default), accept Router
2429 4. If accept_redirects is TRUE (default), accept Redirects.
2441 Default: 0 (disabled) if global forwarding is disabled (default),
2445 Default Hop Limit to set.
2447 Default: 64
2450 Default Maximum Transfer Unit
2452 Default: 1280 (IPv6 required minimum)
2458 Default: 0
2464 Default: 60
2470 Default: 1
2475 Default: 4
2481 Default: 3
2488 Default: false
2499 Default:
2509 Default: 172800 (2 days)
2518 Default: 86400 (1 day)
2525 * 0 : system default
2528 Default: 0 (addresses are removed)
2536 Default: 600
2542 Default: 5
2550 Default: 16
2557 Default: FALSE (enable IPv6 operation)
2573 1 Enable DAD (default)
2585 Default: FALSE
2603 * 0 - (default): do nothing
2608 The IPv6 Traffic Class to use by default when sending IPv6 Neighbor
2615 * 0 - (default)
2621 In most cases this should remain as the default (1).
2623 - 1 - (default): Clear neighbor discover cache on NOCARRIER events.
2630 Default: 10000 (10 seconds)
2636 Default: 1000 (1 second)
2639 * 0 - (default) No enforcement of a MLD version, MLDv1 fallback allowed
2647 * 1 - (default) discard fragmented neighbor discovery packets
2653 * 0: disabled (default)
2666 * 0: disabled (default)
2676 be stable privacy ones by default. This can be changed via the
2677 addrgenmode ip-link. conf/default/stable_secret is used as the
2684 By default the stable secret is unset.
2690 0 generate address based on EUI64 (default)
2702 By default this is turned off.
2709 By default this is turned off.
2715 - 0 - (default) Do not accept unsolicited and untracked neighbor
2750 Default: TRUE
2761 Default: 1000
2776 Default: 0-1,3-127 (rate limit ICMPv6 errors except Packet Too Big)
2782 Default: 0
2788 Default: 0
2794 Default: 0
2801 Default: 0
2822 Default: 1
2828 Default: 1
2834 Default: 1
2840 Default: 0
2846 Default: 0
2858 Default: 0
2873 Default: 0
2892 Default: 1
2914 Default: 0
2934 Default: 0
2945 Default: 0
2954 Default: 1
2960 Default: 4
2967 Default: 10
2974 Default: 8
2982 Default: 5
2998 Default: 0
3007 is disabled by initializing 'ps_retrans' per netns as 0xffff by default,
3010 Default: 0xffff
3017 Default: 3000
3023 Default: 60000
3029 Default: 1000
3036 Default: 30000
3042 Default: 200
3045 The default lifetime of the SCTP cookie (in milliseconds). The cookie
3048 Default: 60000
3057 Default: 1
3072 Default: Dependent on configuration. MD5 if available, else SHA1 if
3089 Default: 0
3097 Default: 0
3110 Default is calculated at boot time from amount of available memory.
3112 sctp_rmem - vector of 3 INTEGERs: min, default, max
3113 Only the first value ("min") is used, "default" and "max" are
3120 Default: 4K
3122 sctp_wmem - vector of 3 INTEGERs: min, default, max
3123 Only the first value ("min") is used, "default" and "max" are
3130 Default: 4K
3140 Default: 1
3155 Default: 0
3158 The default remote UDP encapsulation port.
3161 outgoing UDP-encapsulated SCTP packets by default. Users can also
3171 Default: 0
3183 Default: 0
3194 Default: 0
3208 Default: 0
3220 Default: 1
3229 Default: 1 (enabled)
3244 Default: 10