mellanox/mlx5/counters.rst

74   Traffic counters and drops due to steering or no buffers. May indicate issues
75   with NIC. These counters include Ethernet traffic counters (including Raw
76   Ethernet) and RDMA/RoCE traffic counters.
93 Traffic Informative Counters
94   Counters which count traffic. These counters can be used for load estimation
97 Traffic Acceleration Counters
98   Counters which count traffic that was accelerated by Mellanox driver or by
100   and the same traffic is counted in both informative and acceleration counters.
102 .. [#accel] Traffic acceleration counter.
127 These counters provide information on the amount of traffic that was accelerated
128 by the NIC. The counters are counting the accelerated traffic in addition to the
129 standard counters which counts it (i.e. accelerated traffic is counted twice).
230        traffic. It might imply that the device MTU is larger than the software
492        traffic rx over all queues and/or increase rx ring size.
721        QP/DPDK traffic, excluding RDMA traffic.
726        traffic, excluding RDMA traffic.
731        QP/DPDK traffic, excluding RDMA traffic.
736        QP/DPDK traffic, excluding RDMA traffic.
741        QP/DPDK traffic, excluding RDMA traffic.
746        QP/DPDK traffic, excluding RDMA traffic.
751        QP/DPDK traffic, excluding RDMA traffic.
756        QP/DPDK traffic, excluding RDMA traffic.
761        QP/DPDK traffic, excluding RDMA traffic.
766        QP/DPDK traffic, excluding RDMA traffic.
771        QP/DPDK traffic, excluding RDMA traffic.
776        QP/DPDK traffic, excluding RDMA traffic.
781        RoCE/UD/RC traffic) [#accel]_.
786        RoCE/UD/RC traffic) [#accel]_.
791        RoCE/UD/RC traffic) [#accel]_.
796        RoCE/UD/RC traffic) [#accel]_.
801        RoCE/UD/RC traffic) [#accel]_.
806        RoCE/UD/RC traffic) [#accel]_.
811        RoCE/UD/RC traffic) [#accel]_.
816        RoCE/UD/RC traffic) [#accel]_.
947        cannot absorb the traffic coming from to the adapter.
953        cannot absorb the traffic coming from the network.
964        is congested and cannot absorb the traffic coming from the network.
1054        adapter's incoming traffic.
1098      - This counter provides information on the total amount of traffic that
1100        ratio of errored traffic in `rx_pcs_symbol_err_phy` and
1109        traffic is lost. You may need to replace the cable/transceiver. The error
1126        suffering from high BER, and that traffic might be lost. You may need to
1134        cannot absorb the traffic coming from the adapter. Note: This counter is
1140        counter represents the time the port did not send any traffic. If this
1142        cannot absorb the traffic coming from the adapter. Note: This counter is
1149        cannot absorb the traffic coming from the network. Note: This counter is
1201        and cannot absorb the traffic coming from the adapter. Note: This counter
1208        traffic on this priority. If this counter is increasing, it implies that
1209        the network is congested and cannot absorb the traffic coming from the
1223        and cannot absorb the traffic coming from the network. Note: This counter
1278        is raising in high rate, it might indicate that the receive traffic rate