Lines Matching full:received

145      - The number of packets received on ring i.
149 - The number of bytes received on ring i.
191 - Number of received packets processed using hardware-accelerated GRO. The
192 number of hardware GRO offloaded packets received on ring i.
196 - Number of received bytes processed using hardware-accelerated GRO. The
197 number of hardware GRO offloaded bytes received on ring i.
206 - Number of received packets processed using hardware-accelerated GRO that
216 - The number of LRO packets received on ring i [#accel]_.
220 - The number of LRO bytes received on ring i [#accel]_.
224 - The number of received packets where the ECN mark was turned on.
228 - The number of dropped received packets due to length which arrived to RQ
235 - Number of received packets dropped in software because the CQE data is
240 - Packets received with a `CHECKSUM_UNNECESSARY` on ring i [#accel]_.
244 - Packets received with inner encapsulation with a `CHECKSUM_UNNECESSARY`
249 - Packets received with a `CHECKSUM_NONE` on ring i [#accel]_.
253 - Packets received with a `CHECKSUM_COMPLETE` on ring i [#accel]_.
257 - Number of received packets that had checksum calculation computed,
263 - Number of received packets that need padding larger than eight bytes for
309 - The number of packets received where vlan tag stripping was offloaded to
314 - The number of wrong opcodes received on ring i.
484 - Number of NOP WQEBBs (WQE building blocks) received posted to the XDP SQ.
501 - The number of completions received on the CQ of the `XDP_TX` ring.
547 - The number of completions received for packets redirected to the
616 - Number of received TLS packets with a resync request.
720 - Unicast packets received, steered to a port including Raw Ethernet
725 - Unicast bytes received, steered to a port including Raw Ethernet QP/DPDK
740 - Multicast packets received, steered to a port including Raw Ethernet
745 - Multicast bytes received, steered to a port including Raw Ethernet
760 - Broadcast packets received, steered to a port including Raw Ethernet
765 - Broadcast bytes received, steered to a port including Raw Ethernet
780 - RDMA unicast packets received, steered to a port (counters counts
785 - RDMA unicast bytes received, steered to a port (counters counts
800 - RDMA multicast packets received, steered to a port (counters counts
805 - RDMA multicast bytes received, steered to a port (counters counts
820 - Unicast, multicast and broadcast packets that were loop-back (received
825 - Unicast, multicast and broadcast bytes that were loop-back (received
830 - Number of packets that was received by the NIC, however was discarded
835 - Representor only: packets received, that were handled by the hypervisor.
839 - Representor only: bytes received, that were handled by the hypervisor.
871 - The number of packets received on the physical port. This counter doesn’t
881 - The number of bytes received on the physical port, including Ethernet
890 - The number of multicast packets received on the physical port.
898 - The number of broadcast packets received on the physical port.
906 - The number of dropped received packets due to FCS (Frame Check Sequence)
913 - The number of received packets dropped due to length/type errors on a
918 - The number of received packets dropped due to length greater than allowed
925 - The number of dropped received packets due to length which exceed MTU
932 - The number of received packets dropped due to physical coding errors
937 - The number of MAC control packets received on the physical port.
945 - The number of link layer pause packets received on a physical port. If
957 - The number of MAC control packets received with unsupported opcode on a
962 - The number of received packets dropped due to lack of buffers on a
979 - The number of received packets dropped due to length which is shorter
986 - The number of received packets dropped due to a length which is shorter
993 - The number of received packets d due to a length which is longer than 64
998 - The number of packets received on the physical port with size of 64 bytes.
1002 - The number of packets received on the physical port with size of 65 to
1007 - The number of packets received on the physical port with size of 128 to
1012 - The number of packets received on the physical port with size of 256 to
1017 - The number of packets received on the physical port with size of 512 to
1022 - The number of packets received on the physical port with size of 1024 to
1027 - The number of packets received on the physical port with size of 1519 to
1032 - The number of packets received on the physical port with size of 2048 to
1037 - The number of packets received on the physical port with size of 4096 to
1042 - The number of packets received on the physical port with size of 8192 to
1094 - Failed to allocate a buffer to received packet (or SKB) on ring i.
1099 could have been received and can be used as a guideline to measure the
1132 - The number of pause packets received on the physical port. If this
1139 - The duration of pause received (in microSec) on the physical port. The
1165 - The number of received packets that were dropped due to interface down.
1183 - The number of bytes received with priority p on the physical port.
1187 - The number of packets received with priority p on the physical port.
1199 - The number of pause packets received with priority p on a physical port.
1206 - The duration of pause received (in microSec) on priority p on the