Lines Matching full:doc
5 doc: DPLL subsystem.
11 doc: |
18 doc: input can be only selected by sending a request to dpll
22 doc: highest prio input pin auto selected by dpll
27 doc: |
33 doc: |
39 doc: |
43 doc: |
47 doc: |
58 doc: |
68 doc: type of dpll, valid values for DPLL_A_TYPE attribute
72 doc: dpll produces Pulse-Per-Second signal
76 doc: dpll drives the Ethernet Equipment Clock
81 doc: |
87 doc: aggregates another layer of selectable pins
91 doc: external input
94 doc: ethernet port PHY's recovered clock
97 doc: device internal oscillator
100 doc: GNSS recovered clock
105 doc: |
111 doc: pin used as a input of a signal
115 doc: pin used to output the signal
136 doc: |
142 doc: pin connected, active input of phase locked loop
146 doc: pin disconnected, not considered as a valid input
149 doc: pin enabled for automatic input selection
154 doc: |
160 doc: pin direction can be changed
163 doc: pin priority can be changed
166 doc: pin state can be changed
171 doc: |
302 doc: |
345 doc: |
364 doc: |
391 doc: Set attributes for a DPLL device
403 doc: Notification about device appearing
408 doc: Notification about device disappearing
413 doc: Notification about device configuration being changed
418 doc: |
440 doc: |
481 doc: Set attributes of a target pin
500 doc: Notification about pin appearing
505 doc: Notification about pin disappearing
510 doc: Notification about pin configuration being changed