acpi/dsd/graph.rst

47 "X" is the number of the port. An example of such a package would be::
49     Package() { "port@4", "PRT4" }
56 package would be::
58     Package() { "endpoint@0", "EP40" }
69 name followed by a reference in the same package. Such references consist of
70 the remote device reference, the first package entry of the port data extension
71 reference under the device and finally the first package entry of the endpoint
74     Package() { device, "port@X", "endpoint@Y" }
88 	    Name (_DSD, Package () {
90 		Package () {
91 		    Package () { "compatible", Package () { "nokia,smia" } },
94 		Package () {
95 		    Package () { "port@0", "PRT0" },
98 	    Name (PRT0, Package() {
100 		Package () {
101 		    Package () { "reg", 0 },
104 		Package () {
105 		    Package () { "endpoint@0", "EP00" },
108 	    Name (EP00, Package() {
110 		Package () {
111 		    Package () { "reg", 0 },
112 		    Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, "port@4", "endpoint@0" } },
122 	    Name (_DSD, Package () {
124 		Package () {
125 		    Package () { "port@4", "PRT4" },
129 	    Name (PRT4, Package() {
131 		Package () {
132 		    Package () { "reg", 4 }, /* CSI-2 port number */
135 		Package () {
136 		    Package () { "endpoint@0", "EP40" },
140 	    Name (EP40, Package() {
142 		Package () {
143 		    Package () { "reg", 0 },
144 		    Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, "port@0", "endpoint@0" } },