soc/qcom/qcom%2Cpmic-glink.yaml

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/soc/qcom/qcom,pmic-glink.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm PMIC GLINK firmware interface for battery management, USB
8   Type-C and other things.
11   - Bjorn Andersson <andersson@kernel.org>
15   platforms and implement USB Type-C handling and battery management. This
18   particularly the USB Type-C controllers relationship with USB and DisplayPort
24       - items:
25           - enum:
26               - qcom,sc8180x-pmic-glink
27               - qcom,sc8280xp-pmic-glink
28               - qcom,sm8350-pmic-glink
29               - qcom,sm8450-pmic-glink
30               - qcom,sm8550-pmic-glink
31           - const: qcom,pmic-glink
32       - items:
33           - enum:
34               - qcom,sm8650-pmic-glink
35           - const: qcom,sm8550-pmic-glink
36           - const: qcom,pmic-glink
38   '#address-cells':
41   '#size-cells':
44   orientation-gpios:
45     description: Array of input gpios for the Type-C connector orientation indication.
46       The GPIO indication is used to detect the orientation of the Type-C connector.
47       The array should contain a gpio entry for each PMIC Glink connector, in reg order.
51   '^connector@\d$':
52     $ref: /schemas/connector/usb-connector.yaml#
54       - reg
57   - compatible
60   - if:
66                 - qcom,sm8450-pmic-glink
67                 - qcom,sm8550-pmic-glink
70         orientation-gpios: false
75   - |+
76     pmic-glink {
77         compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
79         #address-cells = <1>;
80         #size-cells = <0>;
82         connector@0 {
83             compatible = "usb-c-connector";
85             power-role = "dual";
86             data-role = "dual";
89                 #address-cells = <1>;
90                 #size-cells = <0>;
95                         remote-endpoint = <&usb_role>;
102                         remote-endpoint = <&ss_phy_out>;
109                         remote-endpoint = <&sbu_mux>;