admin-guide/media/vivid.rst

53 all configurable using the following module options:
80 	these module options to vivid:
107 	would use the following module options:
132 	following module options:
265 	This module option can override that for each instance. Values are:
305 Taken together, all these module options allow you to precisely customize
315 can be configured by using the module options num_inputs, input_types and
326 exceeds your kernel's HZ value, then you will get dropped frames, but the
436 The video output device can be configured by using the module options
484 support both. This is determined by the node_types module option. In all
501 support both. This is determined by the node_types module option.
822 	the ccs_cap_mode module option is set to the default value of -1 and if
823 	the no_error_inj module option is set to 0 (the default).
828 	present if the ccs_cap_mode module option is set to the default value of
829 	-1 and if the no_error_inj module option is set to 0 (the default).
835 	module option is set to the default value of -1 and if the no_error_inj
836 	module option is set to 0 (the default).
862 	the ccs_out_mode module option is set to the default value of -1 and if
863 	the no_error_inj module option is set to 0 (the default).
868 	present if the ccs_out_mode module option is set to the default value of
869 	-1 and if the no_error_inj module option is set to 0 (the default).
875 	module option is set to the default value of -1 and if the no_error_inj
876 	module option is set to 0 (the default).
921 The following controls are only present if the no_error_inj module option
957 	queue_setup() op will return -EINVAL.
963 	precise: the videobuf2 buf_prepare() op will return -EINVAL.
969 	start_streaming() op will return -EINVAL.
1050 	updated when you set a new frequency or when you get the tuner status
1180   implement this, it would mean a lot of work to get this right. Since these
1220 but it is also possible to hardcode it when the module is loaded through the
1221 ccs_cap_mode and ccs_out_mode module options. See section 1 on the details of
1222 these module options.
1263 multiplanar module option, see section 1 for more details on that option.
1279 is so much more capable. By setting flag 0x10000 in the node_types module
1363 framebuffer by setting flag 0x10000 in the node_types module option. The