Lines Matching full:eight

41 - Pulse-Eight: the pulse8-cec driver implements the following module option:
46   module option of the Pulse-Eight driver. The hardware supports it, but I
82 Note that the libcec library (https://github.com/Pulse-Eight/libcec) supports
156 utility to create the ``/dev/cecX`` devices. Support for the Pulse-Eight
168 For Pulse-Eight make /lib/systemd/system/pulse8-cec-inputattach@.service::
195 …ExecStart=/bin/bash -c 'for d in /dev/serial/by-id/usb-Pulse-Eight*; do /usr/bin/inputattach --dae…
243 1) Get a Pulse-Eight USB CEC dongle, connect an HDMI cable from your
244    device to the Pulse-Eight, but do not connect the Pulse-Eight to
247    Now configure the Pulse-Eight dongle::
264    The Pulse-Eight should see the <Image View On> message. If not,
269    Pulse-Eight to a CEC-enabled display and run the same command
271    arriving at the Pulse-Eight.