Lines Matching +full:over +full:- +full:current
20 supplying power to the system (unless some non-Linux
33 "status". This reports the current regulator status, for
38 - off
39 - on
40 - error
41 - fast
42 - normal
43 - idle
44 - standby
52 "error" indicates an out-of-regulation status such as being
77 - 'voltage'
78 - 'current'
79 - 'unknown'
84 'current' means the regulator output current limit can be
88 current limit.
98 measured in microvolts (i.e. E-6 Volts), for regulators
112 microamps. This holds the regulator output current limit
113 setting measured in microamps (i.e. E-6 Amps), for regulators
114 which can report the control input for a current limit.
117 output current level as this value is the same regardless of
127 opmode. This holds the current regulator operating mode,
132 - 'fast'
133 - 'normal'
134 - 'idle'
135 - 'standby'
136 - 'unknown'
183 output current limit setting for this domain measured in
184 microamps, for regulators which support current constraints.
198 output current limit setting for this domain measured in
199 microamps, for regulators which support current constraints.
236 current in microamps for this regulator from all its consumer
363 - 'enabled'
364 - 'disabled'
365 - 'unknown'
381 under-voltage fault (1) or not (0).
390 over-current fault (1) or not (0).
399 out-of-regulation fault (1) or not (0).
417 over-temperature fault (1) or not (0).
426 under-voltage warning (1) or not (0).
435 over-current warning (1) or not (0).
444 over-voltage warning (1) or not (0).
453 over-temperature warning (1) or not (0).