sysfs-class-led-trigger-netdev - OpenGrok cross reference for /linux-6.8/Documentation/ABI/testing/sysfs-class-led-trigger-netdev

1 What:		/sys/class/leds/<led>/device_name
8 What:		/sys/class/leds/<led>/interval
13 		Specifies the duration of the LED blink in milliseconds.
21 What:		/sys/class/leds/<led>/link
28 		If set to 0 (default), the LED's normal state is off.
30 		If set to 1, the LED's normal state reflects the link state
32 		Setting this value also immediately changes the LED state.
35 What:		/sys/class/leds/<led>/tx
42 		If set to 0 (default), the LED will not blink on transmission.
44 		If set to 1, the LED will blink for the milliseconds specified
50 What:		/sys/class/leds/<led>/rx
57 		If set to 0 (default), the LED will not blink on reception.
59 		If set to 1, the LED will blink for the milliseconds specified
65 What:		/sys/class/leds/<led>/offloaded
70 		Communicate whether the LED trigger modes are offloaded to
73 		If 0, the LED is using software fallback to blink.
75 		If 1, the LED blinking in requested mode is offloaded to
78 What:		/sys/class/leds/<led>/link_10
85 		If set to 0 (default), the LED's normal state is off.
87 		If set to 1, the LED's normal state reflects the link state
89 		Setting this value also immediately changes the LED state.
91 What:		/sys/class/leds/<led>/link_100
98 		If set to 0 (default), the LED's normal state is off.
100 		If set to 1, the LED's normal state reflects the link state
102 		Setting this value also immediately changes the LED state.
104 What:		/sys/class/leds/<led>/link_1000
111 		If set to 0 (default), the LED's normal state is off.
113 		If set to 1, the LED's normal state reflects the link state
115 		Setting this value also immediately changes the LED state.
117 What:		/sys/class/leds/<led>/link_2500
124 		If set to 0 (default), the LED's normal state is off.
126 		If set to 1, the LED's normal state reflects the link state
128 		Setting this value also immediately changes the LED state.
130 What:		/sys/class/leds/<led>/link_5000
137 		If set to 0 (default), the LED's normal state is off.
139 		If set to 1, the LED's normal state reflects the link state
141 		Setting this value also immediately changes the LED state.
143 What:		/sys/class/leds/<led>/link_10000
150 		If set to 0 (default), the LED's normal state is off.
152 		If set to 1, the LED's normal state reflects the link state
154 		Setting this value also immediately changes the LED state.
156 What:		/sys/class/leds/<led>/half_duplex
163 		If set to 0 (default), the LED's normal state is off.
165 		If set to 1, the LED's normal state reflects the link half
167 		Setting this value also immediately changes the LED state.
169 What:		/sys/class/leds/<led>/full_duplex
176 		If set to 0 (default), the LED's normal state is off.
178 		If set to 1, the LED's normal state reflects the link full
180 		Setting this value also immediately changes the LED state.