Lines Matching +full:maximum +full:- +full:speed
16 The contents of the label are free-form.
110 Historical maximum voltage
135 this voltage channel is being used for, and user-space
137 user-space.
145 When disabled the sensor read will return -ENODATA.
147 - 1: Enable
148 - 0: Disable
185 Maximum rated voltage.
201 Fan maximum value
226 affects the measurable speed range, not the read value.
247 Desired fan speed
253 Only makes sense if the chip supports closed-loop fan speed
254 control based on the measured fan speed.
263 this fan channel is being used for, and user-space doesn't.
264 In all other cases, the label is provided by user-space.
272 When disabled the sensor read will return -ENODATA.
274 - 1: Enable
275 - 0: Disable
283 - 1: Failed
284 - 0: Ok
300 Fan speed control method:
302 - 0: no fan speed control (i.e. fan at full speed)
303 - 1: manual fan speed control enabled (using `pwmY`)
304 - 2+: automatic fan speed control enabled
313 - 0: DC mode (direct current)
314 - 1: PWM mode (pulse-width modulation)
343 Number of trip points is chip-dependent. Use this for chips
354 Number of trip points is chip-dependent. Use this for chips
367 - 1: CPU embedded diode
368 - 2: 3904 transistor
369 - 3: thermal diode
370 - 4: thermistor
371 - 5: AMD AMDSI
372 - 6: Intel PECI
386 Maximum temperature alarm flag.
388 - 0: OK
389 - 1: temperature has reached tempY_max
405 - 0: OK
406 - 1: temperature has reached tempY_min
452 - 0: OK
453 - 1: temperature has reached tempY_crit
482 - 0: OK
483 - 1: temperature has reached tempY_emergency
534 this temperature channel is being used for, and user-space
536 user-space.
550 Historical maximum temperature
572 When disabled the sensor read will return -ENODATA.
574 - 1: Enable
575 - 0: Disable
589 Maximum rated temperature.
653 Historical maximum current
673 When disabled the sensor read will return -ENODATA.
675 - 1: Enable
676 - 0: Disable
690 Maximum rated current.
716 Maximum power use averaging interval
732 Historical average maximum power use
776 Historical maximum power use
829 Maximum cap that can be set.
845 Maximum power.
853 Critical maximum power.
869 -ENODATA.
871 - 1: Enable
872 - 0: Disable
886 Maximum rated power.
905 -ENODATA.
907 - 1: Enable
908 - 0: Disable
916 - 0: OK
917 - 1: Humidity limit has been reached
926 -ENODATA.
928 - 1: Enable
929 - 0: Disable
937 - 1: Failed
938 - 0: Ok
946 Unit: milli-percent (per cent mille, pcm)
957 this humidity channel is being used for, and user-space
959 user-space.
967 Unit: milli-percent (per cent mille, pcm)
975 Unit: milli-percent (per cent mille, pcm)
986 Unit: milli-percent (per cent mille, pcm)
994 Unit: milli-percent (per cent mille, pcm)
1005 Unit: milli-percent (per cent mille, pcm)
1011 Maximum rated humidity.
1013 Unit: milli-percent (per cent mille, pcm)
1022 - 0: OK
1023 - 1: intrusion detected
1036 - 0: disable
1037 - 1: enable
1045 - 0, off, n: disable
1046 - 1, on, y: enable