Lines Matching full:attribute
132 * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
141 * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
144 * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
196 * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this
197 * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is
284 * attribute given in wiphy capabilities.
331 * to or will include the new %NL80211_ATTR_MLO_LINKS attribute.
333 * now need to be given the %NL80211_ATTR_MLO_LINK_ID attribute, e.g. to
383 * attribute %NL80211_ATTR_IFINDEX. If multiple BSSID advertisements are
533 * using the %NL80211_ATTR_IE attribute. The first cycle of the
536 * scans, it will allow such when the caller provides the flag attribute
617 * included %NL80211_ATTR_FRAME attribute contains the management frame
620 * case the %NL80211_ATTR_FRAME attribute is replaced with a
627 * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
628 * request is for the initial association to an ESS (that attribute not
629 * included) or for reassociation within the ESS (that attribute is
648 * FREQ attribute (for the initial frequency if no peer can be found)
649 * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
653 * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
658 * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
659 * to identify the device, and the TESTDATA blob attribute to pass through
665 * %NL80211_ATTR_SSID attribute, and can optionally specify the association
697 * This attribute is ignored if driver does not support roam scan.
700 * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,
740 * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
751 * requires an interface index, a frame type attribute (optional for
753 * and a match attribute containing the first few bytes of the frame
758 * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if
780 * counters which will be updated to the current value. This attribute
869 * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
874 * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
898 * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be
911 * For the event, the %NL80211_ATTR_MAC attribute carries the TA and
1021 * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in
1024 * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is
1025 * used in the wiphy data as a nested attribute containing descriptions
1031 * that attribute is not included, QoS mapping is disabled. Since this
1041 * If the admitted time attribute is not added then the request just checks
1085 * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
1093 * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this
1119 * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
1177 * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
1207 * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute.
1211 * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address
1214 * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute.
1254 * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh
1259 * is passed using %NL80211_ATTR_TID_CONFIG attribute.
1303 * %NL80211_ATTR_MLO_LINK_ID attribute is used for the new link.
1629 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
1637 * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes
1640 * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values
1651 * this attribute)
1655 * This attribute is now deprecated.
1688 * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
1689 * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
1712 * given for %NL80211_CMD_GET_STATION, nested attribute containing
1723 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
1731 * For example, 'CR', for Costa Rica. This attribute is used by the kernel
1732 * to query the CRDA to retrieve one regulatory domain. This attribute can
1753 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
1754 * supported interface types, each a flag attribute with the number
1764 * a single scan request, a wiphy attribute.
1766 * scan with a single scheduled scan request, a wiphy attribute.
1772 * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
1774 * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
1775 * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
1784 * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
1788 * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
1791 * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
1801 * due to considerations from a beacon hint. This attribute reflects
1803 * attributes consists of a nested attribute containing
1806 * due to considerations from a beacon hint. This attribute reflects
1808 * attributes consists of a nested attribute containing
1822 * this attribute can be used with %NL80211_CMD_ASSOCIATE and
1829 * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
1842 * attribute is also used as a flag in the wiphy information to
1850 * socket. If this attribute is missing, then legacy behavior of sending
1866 * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
1875 * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY,
1889 * Reassociate Request frame (with the value of this attribute in the
1893 * @NL80211_ATTR_KEY: key information in a nested attribute with
1896 * and join_ibss(), key information is in a nested attribute each
1913 * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
1918 * cache, a wiphy attribute.
1921 * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
1931 * rates based on negotiated supported rates information. This attribute
1941 * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
1945 * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
1946 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
1949 * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
1950 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
1953 * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
1960 * nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
1962 * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
2018 * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
2024 * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
2044 * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
2062 * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
2066 * this attribute contains the interface combinations of the first radio.
2069 * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
2074 * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
2078 * nested array attribute containing an entry for each band, with the entry
2096 * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
2104 * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
2110 * applications use this attribute.
2111 * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
2128 * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
2130 * with support for the features listed in this attribute, see
2138 * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
2142 * This attribute holds a bitmap of the supported protocols for
2149 * this feature during association. This is a flag attribute.
2152 * this feature during association. This is a flag attribute.
2155 * this feature during association. This is a flag attribute.
2158 * this feature during association. This is a flag attribute.
2190 * this attribute is (depending on the driver capabilities) added to
2213 * Status code). However, those fields are included in the attribute data
2214 * for all authentication algorithms to keep the attribute definition
2233 * carried in a u32 attribute
2238 * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
2259 * &enum nl80211_protocol_features, the attribute is a u32.
2261 * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports
2282 * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's
2284 * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
2319 * u8 attribute.
2325 * attribute is also used for vendor command feature advertisement
2336 * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
2345 * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
2351 * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
2364 * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
2375 * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
2379 * shall support Radio Resource Measurements (11k). This attribute can be
2391 * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout
2397 * @NL80211_ATTR_TSID: a TSID value (u8 attribute)
2398 * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute)
2400 * (per second) (u16 attribute)
2409 * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
2434 * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
2438 * scheduled scan supported by the device (u32), a wiphy attribute.
2440 * a scan plan (u32), a wiphy attribute.
2442 * a scan plan (u32), a wiphy attribute.
2448 * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
2449 * @NL80211_ATTR_PBSS: flag attribute. If set it means operate
2453 * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
2457 * it contains the behaviour-specific attribute containing the parameters for
2463 * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
2465 * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:
2482 * This attribute is used only if all interfaces are in monitor mode.
2483 * Set this attribute in order to monitor packets using the given MU-MIMO
2494 * attribute must not be included).
2499 * maximum measurement duration allowed. This attribute is used with
2502 * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates
2518 * would be set. This attribute is used with
2524 * attribute.
2525 * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
2530 * Request/Response frame protection. This attribute contains the 16 octet
2534 * packets should be send out as unicast to all stations (flag attribute).
2550 * better BSSs. The attribute value is a packed structure
2554 * u32 attribute with an &enum nl80211_timeout_reason value. This is used,
2579 * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
2584 * support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME
2587 * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
2592 * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
2599 * authentication operation (u32 attribute with an
2602 * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
2603 * space supports external authentication. This attribute shall be used
2607 * attribute deprecated for %NL80211_CMD_START_AP, use
2611 * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
2613 * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum
2626 * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
2631 * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder
2635 * if the attribute is not given no timeout is requested. Note that 0 is an
2651 * allows to set Tx power for a station. If this attribute is not included,
2656 * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It
2662 * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
2667 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)
2669 * the allowed channel bandwidth configurations. (u8 attribute)
2675 * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.
2677 * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry
2679 * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating
2685 * nested attribute with &enum nl80211_tid_config_attr sub-attributes;
2722 * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
2728 * discovery. It is a nested attribute, see
2730 * nested attribute to disable this feature and delete the templates.
2733 * unsolicited broadcast probe response. It is a nested attribute, see
2735 * nested attribute to disable this feature and delete the templates.
2745 * This is a u8 attribute that encapsulates one of the values from
2753 * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
2760 * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's
2762 * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are
2767 * @NL80211_ATTR_MBSSID_CONFIG: Nested attribute for multiple BSSID
2769 * Kernel uses this attribute to indicate the driver's support for MBSSID
2771 * Userspace should use this attribute to configure per interface MBSSID
2786 * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags,
2787 * enumerated in &enum nl80211_ap_settings_flags. This attribute shall be
2801 * @NL80211_ATTR_MLO_SUPPORT: Flag attribute to indicate user space supports MLO
2802 * connection. Used with %NL80211_CMD_CONNECT. If this attribute is not
2805 * @NL80211_ATTR_MAX_NUM_AKM_SUITES: U16 attribute. Indicates maximum number of
2808 * attribute is not present userspace shall consider maximum number of AKM
2810 * number prior to the introduction of this attribute.
2836 * timestamping can be enabled for concurrently (u16), a wiphy attribute.
2840 * be enabled or not (flag attribute).
2842 * @NL80211_ATTR_EMA_RNR_ELEMS: Optional nested attribute for
2843 * reduced neighbor report (RNR) elements. This attribute can be used
2853 * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
2860 * @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to
2864 * @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to
2869 * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with
2873 * @NL80211_ATTR_WIPHY_RADIOS: Nested attribute describing physical radios
2876 * @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS: Nested attribute listing the
2893 * @NL80211_ATTR_EPCS: Flag attribute indicating that EPCS is enabled for a
2903 * @NL80211_ATTR_MAX: highest attribute number currently defined
3585 * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
3745 * These attribute types are used with %NL80211_STA_INFO_TXRATE
3751 * (>6.5535Gbps) only 32-bit attribute is included.
3752 * User space tools encouraged to use the 32-bit attribute and fall
3755 * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
3837 * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
3840 * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
3867 * These attribute types are used with %NL80211_ATTR_STA_INFO
3870 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
3881 * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
3896 * attribute, like NL80211_STA_INFO_TX_BITRATE.
3897 * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
3919 * This is a nested attribute where each the inner attribute number is the
3925 * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
3945 * @NL80211_STA_INFO_MAX: highest possible station info attribute
4004 * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
4012 * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
4013 * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute)
4015 * @NL80211_TID_STATS_MAX: highest numbered attribute here
4033 * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved
4048 * @NL80211_TXQ_STATS_MAX: highest numbered attribute here
4089 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
4092 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
4103 * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
4127 * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved
4128 * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute
4151 * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined
4175 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
4180 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
4185 * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
4188 * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
4200 * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
4233 * @__NL80211_WMMR_INVALID: attribute number 0 is reserved
4255 * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
4283 * channel. A channel that has the INDOOR_ONLY attribute can only be
4292 * off-channel on a channel that has the IR_CONCURRENT attribute set can be
4298 * attribute for IR is disallowed for master interfaces (IBSS, AP).
4304 * This is a nested attribute that contains the wmm limitation per AC.
4340 * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
4404 * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
4408 * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
4470 * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
4491 * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
4517 * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
4523 * if this attribute is in a match set of its own, then it is treated as
4528 * attribute) is if there's only a single matchset with the RSSI attribute.
4534 * RSSI-based BSS selection. The attribute value is a packed structure
4540 * attribute number currently defined
4657 * assumed if the attribute is not set.
4679 * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
4682 * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
4698 * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
4701 * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
4879 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
5003 * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
5025 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
5035 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
5106 * attribute.
5111 * attribute must be provided as well
5113 * attribute must be provided as well
5117 * attribute must be provided as well
5126 * attribute must be provided as well
5148 * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute.
5206 * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
5208 * if the %NL80211_BSS_BEACON_IES attribute is present and the data is
5213 * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the
5221 * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
5229 * @NL80211_BSS_TSF is known to be from a probe response (flag attribute)
5233 * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
5246 * @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be
5251 * This is a u64 attribute containing a bitmap of values from
5252 * &enum nl80211_cannot_use_reasons, note that the attribute may be missing
5255 * @NL80211_BSS_MAX: highest BSS attribute
5298 * The BSS status is a BSS attribute in scan dumps, which
5322 * the attribute for this on CONNECT commands.
5406 * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
5414 * @NL80211_KEY_MAX: highest key attribute
5451 * @NL80211_TXRATE_MAX: highest TX rate attribute
5552 * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
5557 * @NL80211_ATTR_CQM_MAX: highest key attribute
5625 * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
5631 * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates
5643 * the max value is advertised by the driver in this attribute on
5648 * the max value is advertised by the driver in this attribute on
5659 * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful
5690 * enum nl80211_packet_pattern_attr - packet pattern attribute
5691 * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
5708 * @MAX_NL80211_PKTPAT: max attribute number
5762 * which are passed in an array of nested attributes, each nested attribute
5769 * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
5772 * When reporting wakeup. it is a u32 attribute containing the 0-based
5788 * attribute contains the original length.
5791 * attribute if the packet was truncated somewhere.
5794 * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute
5798 * attribute if the packet was truncated somewhere.
5800 * "TCP connection wakeup" for more details. This is a nested attribute
5811 * is detected. This is a nested attribute that contains the
5816 * attribute is also sent in a response to
5819 * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
5825 * Each element in the array is a nested attribute that contains
5826 * one optional %NL80211_ATTR_SSID attribute and one optional
5827 * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of
5835 * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
5941 * For feature advertising, a u32 attribute holding the maximum length
5952 * u32 attribute holding the maximum length
5957 * @MAX_NL80211_WOWLAN_TCP: highest attribute number
5994 * enum nl80211_attr_coalesce_rule - coalesce rule attribute
5995 * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute
6002 * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number
6032 * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
6033 * flag attribute for each interface type in this set
6035 * @MAX_NL80211_IFACE_LIMIT: highest attribute number
6053 * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
6056 * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
6057 * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
6061 * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
6063 * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
6065 * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
6067 * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
6071 * @MAX_NL80211_IFACE_COMB: highest attribute number
6087 * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
6176 * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
6207 * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
6213 * @NL80211_STA_WME_MAX: highest station WME attribute
6234 * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
6336 * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used
6413 * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute,
6415 * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute.
6444 * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
6456 * the max channel attribute in the FILS request params IE with the
6702 * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
6760 * as AP and the beaconing has already been configured. This attribute is
6925 * wiphy dumps (if requested by the application with the attribute
7011 * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
7015 * scan plan (u32). The last scan plan must not specify this attribute
7018 * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
7051 * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
7055 * this attribute is according to &enum nl80211_band (u32).
7058 * RSSI-based BSS selection. The attribute value is a packed structure
7060 * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
7136 * specified in NAN spec. This is a binary attribute.
7151 * follow up Service Discovery Frame. This is a binary attribute.
7158 * specific info. This is a binary attribute.
7159 * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute.
7162 * attribute. It is a list of binary values.
7164 * nested attribute. It is a list of binary values.
7171 * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute
7203 * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
7208 * attribute. Each nested attribute is a MAC address.
7210 * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
7228 * match. This is a nested attribute.
7231 * that caused the match. This is a nested attribute.
7235 * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute
7270 * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute.
7287 * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS
7290 * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved
7310 * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute
7384 * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement
7388 * (flag attribute)
7391 * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number
7408 * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement
7427 * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number
7451 * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by
7454 * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by
7459 * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number
7478 * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability
7481 * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability
7484 * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability
7490 * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is
7496 * @NL80211_PMSR_ATTR_MAX: highest attribute number
7516 * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode
7518 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP
7520 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI
7522 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic
7524 * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits
7531 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating
7534 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating
7536 * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
7538 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
7542 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
7588 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are
7595 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
7608 * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
7712 * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number
7759 * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
7785 * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute.
7803 * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag
7804 * attribute for each interface type that supports AKM suites specified in
7810 * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute.
7837 * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute
7871 * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute
7891 * attribute is not present from userspace.
7939 * @NL80211_SAR_ATTR_MAX: highest sar attribute
7986 * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
8040 * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute
8079 * radio. Attribute may be present multiple times.
8081 * combination for this radio. Attribute may be present multiple times
8087 * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute
8113 * @NL80211_WIPHY_RADIO_FREQ_ATTR_MAX: Highest attribute