Lines Matching +full:11 +full:be
106 * <20:16> :: Reserved, Shall be set to zero
158 * <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
159 * <21:11> :: Reserved
219 * <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
239 * <23:20> :: Reserved, Shall be set to zero
240 * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive)
241 * <17> :: Reserved, Shall be set to zero
243 * <12:11> :: cable termination type (11b == both ends active VCONN req)
258 * <20> :: Reserved, Shall be set to zero
259 * <19:18> :: Type-C to Type-C/Captive (10b == C, 11b == Captive)
260 * <17> :: Reserved, Shall be set to zero
262 * <12:11> :: cable termination type (10b == Vconn not req, 01b == Vconn req)
263 * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
264 * <8:7> :: Reserved, Shall be set to zero
266 * <4:3> :: Reserved, Shall be set to zero
274 * <20> :: Reserved, Shall be set to zero
275 * <19:18> :: Connector type (10b == C, 11b == Captive)
276 * <17> :: Reserved, Shall be set to zero
278 * <12:11> :: cable termination type (10b == one end active, 11b == both ends active VCONN req)
279 * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
343 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 | (tx1d) << 10 \
348 | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \
352 | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \
361 * <15> :: Reserved, Shall be set to zero
363 * <11> :: U3 to U0 transition mode (0b == direct, 1b == through U3S)
372 * <1> :: Reserved, Shall be set to zero
406 | (trans) << 11 | (phy) << 10 | (ele) << 9 | (u4) << 8 \
415 * <23:12> :: Reserved, Shall be set to zero
416 * <11> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
427 | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8 \
445 * <20:17> :: Reserved, Shall be set to zero
446 * <16:15> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
448 * <13> :: Reserved, Shall be set to zero