Kconfig - OpenGrok cross reference for /linux-6.15/drivers/pci/controller/dwc/Kconfig

1 # SPDX-License-Identifier: GPL-2.0
3 menu "DesignWare-based PCIe controllers"
35 	  controller IP on Amazon SoCs. The PCIe controller uses the DesignWare
36 	  core plus Annapurna Labs proprietary hardware wrappers. This is
37 	  required only for DT-based platforms. ACPI platforms with the
48 	  DesignWare IP and therefore the driver re-uses the DesignWare
49 	  core functions to implement the driver.
59 	  and therefore the driver re-uses the DesignWare core functions to
66 	bool "Axis ARTPEC-6 PCIe controller (host mode)"
72 	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
73 	  host mode. This uses the DesignWare core.
76 	bool "Axis ARTPEC-6 PCIe controller (endpoint mode)"
82 	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
83 	  endpoint mode. This uses the DesignWare core.
86 	tristate "Baikal-T1 PCIe controller"
91 	  Enables support for the PCIe controller in the Baikal-T1 SoC to work
92 	  in host mode. It's based on the Synopsys DWC PCIe v4.60a IP-core.
106 	  on DesignWare hardware and therefore the driver re-uses the
107 	  DesignWare core functions to implement the driver.
118 	  on DesignWare hardware and therefore the driver re-uses the
119 	  DesignWare core functions to implement the driver.
182 	  The PCIe controller uses the DesignWare core plus Intel-specific
198 	  DesignWare core functions.
211 	  DesignWare core functions.
214 	bool "Marvell Armada-8K PCIe controller"
220 	  Armada-8K SoCs. The PCIe controller on Armada-8K is based on
221 	  DesignWare hardware and therefore the driver re-uses the
222 	  DesignWare core functions to implement the driver.
238 	  enable host-specific features PCIE_TEGRA194_HOST must be selected and
239 	  in order to enable device-specific features PCIE_TEGRA194_EP must be
240 	  selected. This uses the DesignWare core.
253 	  enable host-specific features PCIE_TEGRA194_HOST must be selected and
254 	  in order to enable device-specific features PCIE_TEGRA194_EP must be
255 	  selected. This uses the DesignWare core.
266 	  Enables support for the PCIe controller in the Designware IP to
268 	  Designware IP.
270 	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
271 	  order to enable device-specific features PCI_DW_PLAT_EP must be
281 	  Enables support for the PCIe controller in the Designware IP to
283 	  in Designware IP.
285 	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
286 	  order to enable device-specific features PCI_DW_PLAT_EP must be
301 	  PCIe controller uses the DesignWare core plus Qualcomm-specific
312 	  to work in endpoint mode. The PCIe controller uses the DesignWare core
313 	  plus Qualcomm-specific hardware wrappers.
319 	tristate "Renesas R-Car Gen4 PCIe controller (host mode)"
325 	  Say Y here if you want PCIe controller (host mode) on R-Car Gen4 SoCs.
327 	  called pcie-rcar-gen4.ko. This uses the DesignWare core.
330 	tristate "Renesas R-Car Gen4 PCIe controller (endpoint mode)"
336 	  Say Y here if you want PCIe controller (endpoint mode) on R-Car Gen4
338 	  will be called pcie-rcar-gen4.ko. This uses the DesignWare core.
373 	  hardware and therefore the driver re-uses the DesignWare core
428 	  host-specific features PCI_DRA7XX_HOST must be selected and in order
429 	  to enable device-specific features PCI_DRA7XX_EP must be selected.
430 	  This uses the DesignWare core.
443 	  host-specific features PCI_DRA7XX_HOST must be selected and in order
444 	  to enable device-specific features PCI_DRA7XX_EP must be selected.
445 	  This uses the DesignWare core.
459 	  DesignWare hardware and therefore the driver re-uses the
460 	  DesignWare core functions to implement the driver.
471 	  on DesignWare hardware and therefore the driver re-uses the
472 	  DesignWare core functions to implement the driver.