net/phy/phy-c45.c

197  * advertisement register 7.515 and whether the status
199  * AN advertisement register 7.514.
201  * advertisement register [31:16] if supported.
260  * genphy_c45_an_config_aneg - configure advertisement registers
263  * Configure advertisement registers based on modes set in phydev->advertising
265  * Returns negative errno code on failure, 0 if advertisement didn't change,
472  * Advertisement registers filling in the link partner advertisement,
514  * genphy_c45_read_lpa - read the link partner advertisement and pause
518  * filling in the link partner advertisement, pause and asym_pause members
548 	/* Read the link partner's base page advertisement */  in genphy_c45_read_lpa()
557 	/* Read the link partner's 10G advertisement */  in genphy_c45_read_lpa()
682  * @adv: the linkmode advertisement settings
692 		/* IEEE 802.3-2018 45.2.7.13 EEE advertisement 1  in genphy_c45_write_eee_adv()
710 		/* IEEE 802.3-2022 45.2.7.16 EEE advertisement 2  in genphy_c45_write_eee_adv()
745  * @adv: the linkmode advertisement status
752 		/* IEEE 802.3-2018 45.2.7.13 EEE advertisement 1  in genphy_c45_read_eee_adv()
763 		/* IEEE 802.3-2022 45.2.7.16 EEE advertisement 2  in genphy_c45_read_eee_adv()
791  * @lpa: the linkmode LP advertisement status
937  * genphy_c45_an_config_eee_aneg - configure EEE advertisement
1122  * advertisement register 7.515 and whether the preference
1123  * is forced or not, it is read from BASE-T1 AN advertisement
1473  * Description: this function will read link partner PHY advertisement
1474  * and compare it to local advertisement to return current EEE state.
1505  * Description: it reports the Supported/Advertisement/LP Advertisement
1530  * Description: sets the Supported/Advertisement/LP Advertisement